Has anyone been able to figure out what the air requirements for this are.
I am thinking an 80 gallon tank and most are around 15cfm at 90 psi which I am sure will be fine but I just want to double check.
Also are you guys looking for dual stage or single stage?
Most of the guys are running higher pressure, higher CFM to the gun based on what I read on the forums as it's all about pressure at the tool and there is typically a large pressure drop at the tool/once running.
I'm looking for a dual stage compressor, preferably. I know there are some very high CFM@90-100+ PSI single stage compressors out there but I'd prefer dual stage if the cost is reasonable.