Posted By: Ziggy Dietrich
1g alternator overdrive pullies - January 24, 2006 03:44 pm UTC
I started these quite some time ago, and there were quite a few guys interested. I got busy, and they went on the "back burner" as these projects often do. In any case, it has been a little slower lately, so we have had a chance to finish the initial batch of these. They replace the stock alternator pulley, and they are 12.5% smaller in diameter, so the alternator will spin 12.5% faster. This is good if you should have an underdrive crank pulley, or a large stereo that draws lots of power. It can also help if you have the headlights dimming at idle. I don't know whether the size difference will require a change of belt or not. I could not make them any smaller than 12.5% smaller, as I was starting to run into problems with interference with the alternator casting. They also weigh less than one third what the stock pulley does, and they are nice and shiny .
I will be selling these on my website for probably $60.USD, but I thought I would make them available to you guys for a little less. At $52.17 CDN., That would work out to $60. with GST and PST, assuming you pick up. At that price, it would also have to be cash or email transfer. Paypal or credit card docks me 3.5%. Shipping would be extra.
It will be first come first served, but I have about 20 of them available.
My PM box is usually full, so email to: rtm@mountaincable.net
I will be selling these on my website for probably $60.USD, but I thought I would make them available to you guys for a little less. At $52.17 CDN., That would work out to $60. with GST and PST, assuming you pick up. At that price, it would also have to be cash or email transfer. Paypal or credit card docks me 3.5%. Shipping would be extra.
It will be first come first served, but I have about 20 of them available.
My PM box is usually full, so email to: rtm@mountaincable.net