Welding/Fabrication shop/Like us on facebook
Posted By: Jaden Cubberley
Welding/Fabrication shop/Like us on facebook - December 28, 2012 02:52 am UTC
Hey guys, just wanted to get the DSM Canada Community aware of a business i started, mainly welding and Fabrication but I am making custom DSM parts Quite often
Check out my facebook page here:
http://www.facebook.com/v8kiler#!/CubberleyWeldingAndFabrication?fref=ts
I dont have a tonne of DSM stuff yet but feel free to check out my page and if you have any sugestions about the page or if your interested in any products let me know.
have acess to a full size shear and brake aswell as a lot of equiptment in my shop at home.
Aluminum TIG & MIG
Stainless TIG & MIG
Chromoly TIG & MIG
Mild steel TIG & MIG
Custom one off parts made in canada.
Posted By: Bryan Lawrence
Re: Welding/Fabrication shop/Like us on facebook - December 28, 2012 03:11 am UTC
Catch cans and overflows are popular.
I would be interested in an overflow for a 1g.
Posted By: Roman Cullen
Re: Welding/Fabrication shop/Like us on facebook - December 28, 2012 06:55 am UTC
I could use a overflow for a 1g as well...
Posted By: Kyle Guba
Re: Welding/Fabrication shop/Like us on facebook - December 28, 2012 12:18 pm UTC
X3 depending on price
Posted By: Jaden Cubberley
Re: Welding/Fabrication shop/Like us on facebook - December 28, 2012 01:05 pm UTC
let me know what kind of design you are looking for and i will see what i can come up with? i'm guessing people want them the same as from frontline fab?
Posted By: Ziggy Dietrich
Re: Welding/Fabrication shop/Like us on facebook - December 28, 2012 02:10 pm UTC
Frontline Fab doesn't make an overflow or a catch can that is 1g specific..just for the 2g
Posted By: Jaden Cubberley
Re: Welding/Fabrication shop/Like us on facebook - December 28, 2012 02:36 pm UTC
where are the frontline ones mounted in the engine bay? I could probably make up something that would bolt to the shock towers bolts or would mount with a self tapping screws.
Im thinking one K&N vent per unit and one fitting to connect to valve cover. I can also put a drain valve in the bottom of them.
need to know what size fittings people are wanting and i can get those parts ordered from RTM and build them ASAP
Posted By: Bryan Lawrence
Re: Welding/Fabrication shop/Like us on facebook - December 28, 2012 03:17 pm UTC
Well for the catch cans most people are running off both vents so you would need two inputs.
As for the coolant overflow, if it mounting bracket was to the stock BOV location that would be perfect, or right behind the rad if you need more clearance.
Posted By: Jaden Cubberley
Re: Welding/Fabrication shop/Like us on facebook - December 28, 2012 04:34 pm UTC
alright so most people are wanting the coolant overflow right now?
I can probably put something together this weekend for them. not to sure what they will have for a cap yet
Posted By: Bryan Lawrence
Re: Welding/Fabrication shop/Like us on facebook - December 28, 2012 04:40 pm UTC
Just like this:
Here is the guys website if you want more pictures. You can see the mounting bracket on the third picture.
Posted By: Jaden Cubberley
Re: Welding/Fabrication shop/Like us on facebook - December 28, 2012 05:41 pm UTC
I could make something exactly like that but they wouldn't be cheap.
Around $150 tax in would be the best i could do. looking at 3 hours labor to build one and i usually charge $60/hr + materials but you never end up making that on these projects.
im sure those caps aren't cheap either
Posted By: Bryan Lawrence
Re: Welding/Fabrication shop/Like us on facebook - December 28, 2012 07:32 pm UTC
Well I would be in at that price. I don't really care what type of cap just as long as it's screw top.
Also wondering if you would be interested in making me a fuel cell. I would need it to use the original mounting points and would want it to have studs so I can put in the original sending unit.
Posted By: Jaden Cubberley
Re: Welding/Fabrication shop/Like us on facebook - December 28, 2012 08:38 pm UTC
well lets worry about the overflow before we get to carried away...
would anyone else be in @ $150?
Posted By: Bryan Lawrence
Re: Welding/Fabrication shop/Like us on facebook - December 28, 2012 08:44 pm UTC
Haha, ok just trying to keep ya busy
Posted By: Roman Cullen
Re: Welding/Fabrication shop/Like us on facebook - December 28, 2012 10:14 pm UTC
I would be in as well
Posted By: Andrew Trapp
Re: Welding/Fabrication shop/Like us on facebook - December 28, 2012 11:38 pm UTC
The coolant res from Frontline for the 2g goes where the stock fusebox is. To use it, you need to relocate your stock fusebox. Unfortunately, I don't have any pictures.
The catch can from Frontline, at least for the 2g, mounts above the battery and requires a battery relocation to use.
edit: Not trying to speak for Ziggy, but you might want to get in touch with Ziggy to see if he would be able to supply you with a cap, either by sourcing or fabrication.
Posted By: Ziggy Dietrich
Re: Welding/Fabrication shop/Like us on facebook - December 29, 2012 01:57 pm UTC
I've had a quick look, and only thing I could find decently priced is the Jegs cap and bung. It has the Jegs logo, which I am not sure people would want, and I don't have an account with Jegs. I can get others, but not really cheap.
I DO have a chinese "oil catch tank" that comes with a cap for some reason (no idea why), maybe that could be converted somehow??
Posted By: Mike Eng
Re: Welding/Fabrication shop/Like us on facebook - December 29, 2012 03:53 pm UTC
The catch can from Frontline, at least for the 2g, mounts above the battery and requires a battery relocation to use.
I plan to mount the FF catch can where the cruise control would be, but transverse, or perpendicular to the battery. And using two 90* fittings to -10an braided lines to the valve cover. I didn't think the catch can comes with any type of mounting bracket. If it does, that's not good! I'd need to cut and grind them off so I could customize one for my application.
Posted By: Jaden Cubberley
Re: Welding/Fabrication shop/Like us on facebook - December 29, 2012 08:46 pm UTC
here are some pictures of a piece that i was working on for a bit this weekend. Let me know what you think. not Dead set on this design, might ditch the tubing for a different style.
Theres really only so much that you can do in such limited space, right now its set up to mount to where the stock air box hole is and to a square hole near the rad on the top... the level invicator sits right where the stock overflow is.
No lid yet because everywhere that would sell them is closed. Probably looking at another 2 weeks for the cap because "pro-Werks" is in the states
http://s643.beta.photobucket.com/us...amp;_suid=135681395475702912429386138938http://s643.beta.photobucket.com/us...amp;_suid=135681397735309117307273082864
Posted By: Andrew Trapp
Re: Welding/Fabrication shop/Like us on facebook - December 30, 2012 06:35 am UTC
The catch can from Frontline, at least for the 2g, mounts above the battery and requires a battery relocation to use.
I plan to mount the FF catch can where the cruise control would be, but transverse, or perpendicular to the battery. And using two 90* fittings to -10an braided lines to the valve cover. I didn't think the catch can comes with any type of mounting bracket. If it does, that's not good! I'd need to cut and grind them off so I could customize one for my application.
I'm not a 100% sure how it works out, but the description is "This guy is 100% bolt-in as long as your battery is relocated."
Posted By: Bryan Lawrence
Re: Welding/Fabrication shop/Like us on facebook - December 30, 2012 06:58 am UTC
I am liking it so far, I would definitely be interested in keeping the indicator cause it's always nice to know exactly how much is in there.
Posted By: Jaden Cubberley
Re: Welding/Fabrication shop/Like us on facebook - December 30, 2012 02:04 pm UTC
Alright well I will keep you guys posted about the caps. I'm sure they will be a while though unfortunately
Posted By: Roman Cullen
Re: Welding/Fabrication shop/Like us on facebook - December 30, 2012 08:25 pm UTC
Good sh!t. You got any pics of it in your 1g?
Posted By: Jaden Cubberley
Re: Welding/Fabrication shop/Like us on facebook - January 02, 2013 09:18 pm UTC
Update on this... found the pro werks caps, there not cheap but thats alright i will still do the same pricing on them.
I will have the caps friday, ordered 4 of them so if you are wanting one send me a PM and i will reserve one for you.
I have test fit the positioning of them in the car and they are going to fit near the stock location. It will run flat across the front. I will take more pictures when they are fitting right and the caps are on.
Thanks
Posted By: Roman Cullen
Re: Welding/Fabrication shop/Like us on facebook - January 02, 2013 10:29 pm UTC
Do we get to choose a colour for the cap?
Posted By: Jaden Cubberley
Re: Welding/Fabrication shop/Like us on facebook - January 03, 2013 01:06 pm UTC
The caps will be red...
Posted By: Roman Cullen
Re: Welding/Fabrication shop/Like us on facebook - January 03, 2013 01:58 pm UTC
Perfect
Posted By: Bryan Lawrence
Re: Welding/Fabrication shop/Like us on facebook - January 03, 2013 02:05 pm UTC
Damn I was doing really good at keeping colour out of my engine bay, can i get black?
Posted By: Jaden Cubberley
Re: Welding/Fabrication shop/Like us on facebook - January 03, 2013 02:37 pm UTC
LOL seriously? i thought for sure everyone would want a blue or red... I already ordered the red ones
Posted By: Bryan Lawrence
Re: Welding/Fabrication shop/Like us on facebook - January 03, 2013 03:23 pm UTC
I seem to be one of the select few that want's neither blue or red, I have been slowly taking all the flash out of my bay.
Posted By: Mike Eng
Re: Welding/Fabrication shop/Like us on facebook - January 04, 2013 05:24 am UTC
I hear ya Bryan, I was considering it myself but too late..dsm's are meant to be looked at, especially under the hood
Posted By: Bryan Lawrence
Re: Welding/Fabrication shop/Like us on facebook - January 04, 2013 12:53 pm UTC
Well polished aluminum and wrinkle black is damn nice to look at, don't you think!?
Posted By: Jaden Cubberley
Re: Welding/Fabrication shop/Like us on facebook - January 04, 2013 06:27 pm UTC
Well brian your in luck, the guy screwed up my order and the caps came in Black.
Posted By: Bryan Lawrence
Re: Welding/Fabrication shop/Like us on facebook - January 04, 2013 06:46 pm UTC
YAY!!! So when do we get to see pictures of your work and how it mounts?
Posted By: Jaden Cubberley
Re: Welding/Fabrication shop/Like us on facebook - January 04, 2013 08:23 pm UTC
Possibly this weekend, however i am working on another top secret project that may take a bit of time also.
Posted By: Mike Eng
Re: Welding/Fabrication shop/Like us on facebook - January 04, 2013 08:26 pm UTC
Gotta be a fuel cell
Posted By: Bryan Lawrence
Re: Welding/Fabrication shop/Like us on facebook - January 04, 2013 08:36 pm UTC
Gotta be a fuel cell
Hope so!! :-D
Posted By: Roman Cullen
Re: Welding/Fabrication shop/Like us on facebook - January 04, 2013 09:50 pm UTC
Well brian your in luck, the guy screwed up my order and the caps came in Black.
Shittayyyy
Posted By: Jaden Cubberley
Re: Welding/Fabrication shop/Like us on facebook - January 05, 2013 09:23 pm UTC
Here are some pictures for you installed in a 1g with a front mount intercooler and short route piping. I see no reason why they wont fit on a stock intercooler car however.... also i have supplied a 1" spacer with the coolant overflow so if your pipes hit on the bottom all you have to do is put the spacer in the bottom... if they dont hit the spacer will go in the top setting the unit down in farther. The pictures of it are with the spacer on the top.
http://s643.beta.photobucket.com/us...mp;_suid=1357420962638015730591218411588http://s643.beta.photobucket.com/us...&_suid=13574209824090679978767347643http://s643.beta.photobucket.com/us...amp;_suid=135742099686808178412868937661
Posted By: Bryan Lawrence
Re: Welding/Fabrication shop/Like us on facebook - January 06, 2013 03:19 am UTC
Take my money!! But seriously, when can I get one?
Posted By: Jaden Cubberley
Re: Welding/Fabrication shop/Like us on facebook - January 06, 2013 04:14 am UTC
There is one available right now... you can make arrangments to pick it up or have it shipped anytime.
Posted By: Bryan Lawrence
Re: Welding/Fabrication shop/Like us on facebook - January 06, 2013 06:50 am UTC
jaden, do you have access to powder coating?
Posted By: Jaden Cubberley
Re: Welding/Fabrication shop/Like us on facebook - January 06, 2013 01:33 pm UTC
I know a guy that does powder coating but I don't have any equipment to do it myself unfortunately
Posted By: Ziggy Dietrich
Re: Welding/Fabrication shop/Like us on facebook - January 06, 2013 02:19 pm UTC
Sorry to interrupt here, but Bryan...does this mean you no longer want the Frontline Fabrications catch can?
Posted By: Bryan Lawrence
Re: Welding/Fabrication shop/Like us on facebook - January 06, 2013 05:18 pm UTC
Ziggy this is an overflow, I thought you already put in the order for the catch can?
Posted By: Ziggy Dietrich
Re: Welding/Fabrication shop/Like us on facebook - January 06, 2013 06:03 pm UTC
Yes, order is in, that was my concern (although, I STILL haven't heard back with an ETA from Andrew at Frontline). Sorry, I thought this thread was a about a catch can also....
Carry on please....
Posted By: Bryan Lawrence
Re: Welding/Fabrication shop/Like us on facebook - January 07, 2013 05:01 pm UTC
No worries Ziggy, let us know when you hear anything as I am sure I am not the only one that is eagerly waiting.
Posted By: Jaden Cubberley
Re: Welding/Fabrication shop/Like us on facebook - January 08, 2013 01:36 pm UTC
Still have 2 overflow bottles left, I may be able to make some for 2Gs if anyone is interested.
Also if anyone is needing any other projects let me know and ill see what i can come up with.
Posted By: Jaden Cubberley
Re: Welding/Fabrication shop/Like us on facebook - January 17, 2013 03:40 pm UTC
Well after looking over my options. I'm going to get more into the Pipe building aspect. hoping to build pipes for highway tractors, custom turbo setups and exhaust for cars and trucks. Like a pipe only specialty store... There isn't a lot of people who do pipe around my area and I already have some experience in the field.
also hoping to go in and get some tickets for pipe welding so i will be fully certified if i'm needed for factory jobs.
I will still be offering a basic fabrication service but i'm not going to be looking for any big jobs, still have access to a sheet metal shop but they want to charge me $60/hr to use there equipment.
Have a nice piece of equiptment on order to add to my shop:
http://www.huthbenders.com/huth-products/expanders-and-swagers/portable-expander-model-1691hoping in the next month or so to also add full tooling for the machine to do 1" - 5" pipe ( really really expensive for what it is) also there is a rod bending attachment for it to do hangers, looking at a power bead roller, dies for making expansion joints in my shop press and possibly some kind of vertical "mandrel style" bender
all the attachments and dyes for stuff like this seems to be ridiculously priced which sucks but hoping to get most of this stuff in the next 3-6 months and hopefully have the business in full operation by the end of the year...
If anyone is looking for any type of pipes let me know!