This is something that has started on DSMTalk and DSMLink, I thought it would be nice to bring it to Club DSM Canada.

The thought is, if you need little stuff, and I mean little stuff like the odd clamp, bolt etc. post it up here and see if someone has it. The post was "If anyone needs little stuff, and I mean little stuff, post it here and I'll gladly pay it forward."

So, in saying that, I have a big bucket of bolts in my basement, a 2G parts car and some other random small parts/components from a 1G.

This is done in hopes of helping one another in the community get their cars together faster!

I need a 17mm rear diff bolt, the longer one(?) on top that cannot be removed without taking the subframe out...

I have a complete 2G EGR, mitsu turbo gasket, I need 2g hood hinges..

HAVE: 1g complete rear seatbelt assembly
Bucket-o-bolts
1g Cruise control assembly
1 of the coat hanger hook thingers on the roof
rear washer reservoir


Need:1g Hatch seal

What side of the seal do you need? I should have a good hatch side. no more body sides though.

I need the harnesses from the stock fans both rad and condenser.

I chopped em off to hard wire a different fan setup. Then one fan took a crap. Bought new fans and they are setup with the clips I laughed when I saw it. Was like damn. Don't want to chop this one up If I don't have to. LMK if someone can snip them off ( a little extra wire to solder would be nice there too)

I got a bunch of bolts, a brand new rear main seal for a 2g awd! umm stock cams some other stuff!

OH OH I need those two little grey thingys that hold up the trunk divider things. Like that goes into the hatch and holds the strings on.

I have 1g single piston front calipers, complete with awd 92 rotors and awd 98 rotors for anyone.

Are AWD and FWD the same size rotors?

^yes

The one I need is on the body, goes around the perimeter of the hatch but stays attached to the body, what do you mean by hatch side?

Question: will a 1g cat-back fit onto a 2g catback ??

[i don't think so from what i read,bc they exit opposite sides]

Pretty sure they are very different.

The 92 rotors are for single piston calipers and the 98 rotors are for 2 piston calipers.

I also have stock 92 front brake lines and stock 98 brake lines.

I think theres a rubber piece that goes around the actual hatch part aswell.
But sorry I dont got the body side.

Hmm.. I could really use a breather hose (between the left side of the valve cover and intake tube), if anyone's got one laying around?

I've got one Steve, and I'm coming home first weekend of April, I can stop by and drop it off if you want.

Dude, I should have like 2 or 3 lying around.

bah I thought it was directed at me!

Sorry...


Steven

Well, I take it since the first weekend of April has already gone by, you mean the first weekend of May?

That would be cool, I'm possibly going to be in the fishing derby all that weekend, but we'll talk closer that time and see! Unless Jay's got one that's not all the way in Marmora! haha

Yeah, that's what I meant. Sorry.

If not, I'll drop it off at your place, maybe in your mailbox or with your rents.

Need a working ISC motor. Mine threw a malfunction code at me today.

Have
- red jdm valve cover, no cracks but the paint is chipping
- brand new break pads, for single piston calipers

I'm guessing the ISC motors are different for 1's and 2 g's?

^yes

Sorry, I should have said it's for a 6bolt then

Looking for a connector that attaches to the sensor for a AEM wideband, I have the wire and connector that is attached to the gague. The old one must of ripped off while I was driving.

I've got an ISC here, I think. I'll have to double check. You can have it for $20+shipping.

Need the stock tire iron and handle for the jack, I'd really like to stop carrying around my shop jack for long trips.

I've got one of those as well. PM me.

I just broke a fuel rail bolt. The long one that attaches the rail to the intake mani. Anyone got one?

I need the rubber mounting bushings for the a/c condenser. Anyone?

Great idea and all but isn't this the same as using the WTB WTS forums and listing things as free?

I'm just sayin'

@Brian, I think I might have the rear diff bolt. How soon do you need it. I'm doing a rear swap in about a week or two so you can have the bolt then.

Ya, but from what I get this is people looking for free stuff, and others giving a hand. Not selling or buying

...fixed my post

Tashko, If I need it i'll shoot ya a PM later, I borrowed one off a buddys parts car, thank you

I think I need a dimmerswitch. Uhhh my dad wants the stock 2g gsx exhuast out of here?

Need a 2G EGR Solenoid that works. Going to be in the GTA this week (Monday/Tuesday) specifically in St. Catherine's/Hamilton/Missy/Falls area.

How aboutttt... anyone want two 1ga 16" wheels for ten bucks each?

Need PCV valve hose if anyone has got one