Pay it forward
Posted By: Ryan Laliberte
Pay it forward - April 10, 2009 02:33 pm UTC
This is something that has started on DSMTalk and DSMLink, I thought it would be nice to bring it to Club DSM Canada.
The thought is, if you need little stuff, and I mean little stuff like the odd clamp, bolt etc. post it up here and see if someone has it. The post was "If anyone needs little stuff, and I mean little stuff, post it here and I'll gladly pay it forward."
So, in saying that, I have a big bucket of bolts in my basement, a 2G parts car and some other random small parts/components from a 1G.
This is done in hopes of helping one another in the community get their cars together faster!
Posted By: Brian Fernandez
Re: Pay it forward - April 10, 2009 02:40 pm UTC
I need a 17mm rear diff bolt, the longer one(?) on top that cannot be removed without taking the subframe out...
Posted By: Darren McBeth
Re: Pay it forward - April 10, 2009 06:39 pm UTC
I have a complete 2G EGR, mitsu turbo gasket, I need 2g hood hinges..
Posted By: Dustin Phillion
Re: Pay it forward - April 10, 2009 07:33 pm UTC
HAVE: 1g complete rear seatbelt assembly
Bucket-o-bolts
1g Cruise control assembly
1 of the coat hanger hook thingers on the roof
rear washer reservoir
Need:1g Hatch seal
What side of the seal do you need? I should have a good hatch side. no more body sides though.
Posted By: Steve Kogon
Re: Pay it forward - April 12, 2009 06:00 am UTC
I need the harnesses from the stock fans both rad and condenser.
I chopped em off to hard wire a different fan setup. Then one fan took a crap. Bought new fans and they are setup with the clips I laughed when I saw it. Was like damn. Don't want to chop this one up If I don't have to. LMK if someone can snip them off ( a little extra wire to solder would be nice there too)
I got a bunch of bolts, a brand new rear main seal for a 2g awd! umm stock cams some other stuff!
Posted By: Steve Kogon
Re: Pay it forward - April 12, 2009 06:03 am UTC
OH OH I need those two little grey thingys that hold up the trunk divider things. Like that goes into the hatch and holds the strings on.
I have 1g single piston front calipers, complete with awd 92 rotors and awd 98 rotors for anyone.
Are AWD and FWD the same size rotors?
Posted By: chris esquejo
Re: Pay it forward - April 12, 2009 11:01 am UTC
^yes
Posted By: Dustin Phillion
Re: Pay it forward - April 13, 2009 03:29 am UTC
What side of the seal do you need? I should have a good hatch side. no more body sides though.
The one I need is on the body, goes around the perimeter of the hatch but stays attached to the body, what do you mean by hatch side?
Posted By: Joshua Mociak
Re: Pay it forward - April 13, 2009 04:29 am UTC
Question: will a 1g cat-back fit onto a 2g catback ??
[i don't think so from what i read,bc they exit opposite sides]
Posted By: Jay McClelland
Re: Pay it forward - April 13, 2009 04:32 am UTC
Question: will a 1g cat-back fit onto a 2g catback ??
[i don't think so from what i read,bc they exit opposite sides]
Pretty sure they are very different.
The 92 rotors are for single piston calipers and the 98 rotors are for 2 piston calipers.
I also have stock 92 front brake lines and stock 98 brake lines.
What side of the seal do you need? I should have a good hatch side. no more body sides though.
The one I need is on the body, goes around the perimeter of the hatch but stays attached to the body, what do you mean by hatch side?
I think theres a rubber piece that goes around the actual hatch part aswell.
But sorry I dont got the body side.
Posted By: Steven Usher
Re: Pay it forward - April 13, 2009 09:32 pm UTC
Hmm.. I could really use a breather hose (between the left side of the valve cover and intake tube), if anyone's got one laying around?
Posted By: Ryan Laliberte
Re: Pay it forward - April 13, 2009 09:36 pm UTC
I've got one Steve, and I'm coming home first weekend of April, I can stop by and drop it off if you want.
Posted By: Jay McClelland
Re: Pay it forward - April 13, 2009 09:36 pm UTC
Dude, I should have like 2 or 3 lying around.
Posted By: Steve Kogon
Re: Pay it forward - April 13, 2009 10:02 pm UTC
I've got one Steve, and I'm coming home first weekend of April, I can stop by and drop it off if you want.
bah I thought it was directed at me!
Posted By: Ryan Laliberte
Re: Pay it forward - April 13, 2009 10:03 pm UTC
Sorry...
Steven
Posted By: Steven Usher
Re: Pay it forward - April 13, 2009 10:23 pm UTC
Well, I take it since the first weekend of April has already gone by, you mean the first weekend of May?
That would be cool, I'm possibly going to be in the fishing derby all that weekend, but we'll talk closer that time and see! Unless Jay's got one that's not all the way in Marmora! haha
Posted By: Ryan Laliberte
Re: Pay it forward - April 14, 2009 12:08 am UTC
Yeah, that's what I meant. Sorry.
If not, I'll drop it off at your place, maybe in your mailbox or with your rents.
Posted By: Mike Petro
Re: Pay it forward - April 14, 2009 12:56 am UTC
Need a working ISC motor. Mine threw a malfunction code at me today.
Have
- red jdm valve cover, no cracks but the paint is chipping
- brand new break pads, for single piston calipers
I'm guessing the ISC motors are different for 1's and 2 g's?
Posted By: chris esquejo
Re: Pay it forward - April 14, 2009 09:44 am UTC
^yes
Posted By: Mike Petro
Re: Pay it forward - April 14, 2009 02:04 pm UTC
Sorry, I should have said it's for a 6bolt then
Posted By: Mike Sanders
Re: Pay it forward - April 14, 2009 05:28 pm UTC
Looking for a connector that attaches to the sensor for a AEM wideband, I have the wire and connector that is attached to the gague. The old one must of ripped off while I was driving.
Posted By: Mark Bondy
Re: Pay it forward - April 15, 2009 01:19 am UTC
Need a working ISC motor. Mine threw a malfunction code at me today.
I've got an ISC here, I think. I'll have to double check. You can have it for $20+shipping.
Posted By: Dustin Phillion
Re: Pay it forward - April 15, 2009 02:11 am UTC
Need the stock tire iron and handle for the jack, I'd really like to stop carrying around my shop jack for long trips.
Posted By: Ryan Laliberte
Re: Pay it forward - April 15, 2009 02:41 am UTC
I've got one of those as well. PM me.
Posted By: Darren McBeth
Re: Pay it forward - April 16, 2009 12:39 am UTC
I just broke a fuel rail bolt. The long one that attaches the rail to the intake mani. Anyone got one?
Posted By: Peter Urach
Re: Pay it forward - April 22, 2009 12:14 am UTC
I need the rubber mounting bushings for the a/c condenser. Anyone?
Great idea and all but isn't this the same as using the WTB WTS forums and listing things as free?
I'm just sayin'
@Brian, I think I might have the rear diff bolt. How soon do you need it. I'm doing a rear swap in about a week or two so you can have the bolt then.
Posted By: brendan warwick
Re: Pay it forward - April 22, 2009 12:29 am UTC
Ya, but from what I get this is people looking for free stuff, and others giving a hand. Not selling or buying
...fixed my post
Posted By: Brian Fernandez
Re: Pay it forward - April 22, 2009 12:31 am UTC
Tashko, If I need it i'll shoot ya a PM later, I borrowed one off a buddys parts car, thank you
Posted By: Mike Lane
Re: Pay it forward - April 23, 2009 02:13 am UTC
I think I need a dimmerswitch. Uhhh my dad wants the stock 2g gsx exhuast out of here?
Posted By: Ryan Laliberte
Re: Pay it forward - April 26, 2009 01:53 am UTC
Need a 2G EGR Solenoid that works. Going to be in the GTA this week (Monday/Tuesday) specifically in St. Catherine's/Hamilton/Missy/Falls area.
Posted By: Brian Fernandez
Re: Pay it forward - April 26, 2009 02:09 am UTC
How aboutttt... anyone want two 1ga 16" wheels for ten bucks each?
Posted By: Mike Tran
Re: Pay it forward - April 26, 2009 02:35 am UTC
Need PCV valve hose if anyone has got one
Posted By: Murtaza Saadat
Re: Pay it forward - April 26, 2009 06:48 am UTC
Ryan I think I have an EGR solenoid, ju chen got one of the solenoids in that corner don't know which.
But I am in the london area.....another 2hr drive from the GTA?
Posted By: Ryan Laliberte
Re: Pay it forward - April 26, 2009 02:42 pm UTC
I'm going to be at Ziggy's on Tuesday.
It's for a 2G.
Posted By: Murtaza Saadat
Re: Pay it forward - April 26, 2009 08:25 pm UTC
One of those 2 is what you need right? And yeah it is off a 2G.
Posted By: Ryan Laliberte
Re: Pay it forward - April 26, 2009 08:27 pm UTC
I actually would like both if that's ok.
Posted By: Murtaza Saadat
Re: Pay it forward - April 26, 2009 08:38 pm UTC
yep thats cool.
Posted By: Ryan Laliberte
Re: Pay it forward - April 26, 2009 08:39 pm UTC
Where do you wanna meet? I can't drive to London.
Posted By: Murtaza Saadat
Re: Pay it forward - April 26, 2009 08:43 pm UTC
My car currently sucks and cant drive it far, if you want I can mail it to you?
Posted By: Ryan Laliberte
Re: Pay it forward - April 26, 2009 09:08 pm UTC
Sure.
Posted By: Steve Kogon
Re: Pay it forward - April 26, 2009 09:21 pm UTC
no one has the fan connectors? I really want to get this new fan in!
I have got a 2Ga Talon trunk cover, 1G MAF with wiring and K & N Filter.
by the way, my 1G MAF, is just the MAF and Filter, no tube.
Posted By: Kenrick Miller
Re: Pay it forward - May 12, 2009 03:18 am UTC
I think this is a great idea. Would we be able to go one step further and creat a sub-forum for this. It can be called FreeCycle or something like that.
DSM Scrapyard
Posted By: Ryan Laliberte
Re: Pay it forward - May 16, 2009 03:46 am UTC
URGENT!!
I need 3 things.
Front Motor Mount for a 1G AWD. Will pay if it's prothane or something. We have the inserts, they aren't going to work as our powdercoat guy melted/punched out the center.
Also need 2 14b/16G style COOLANT banjo bolts. BOTH bolts. This is stopping us from getting the turbo on and we can't prime the motor!
I do believe I have both those bolts on an old broken turbo, let me check tommorow
Posted By: DaveBarlow
Re: Pay it forward - May 16, 2009 06:28 pm UTC
Needed Driverside motor mount from a 7bolt motor.. the one that is actually bolted to the block and has 2 spike like things on it. I am currently swapping in my 2.4 and I need this mount
Let me know
Checked the bolts Ryan, I only have the 2 that go right to the center cartridge on the turbo.
Posted By: Ryan Laliberte
Re: Pay it forward - May 16, 2009 08:47 pm UTC
Are they for the coolant lines? Because that's what we need!
Posted By: Louis Savard
Re: Pay it forward - May 18, 2009 01:49 am UTC
Ever find those banjo bolts...I have a few in my box o goodies...pretty sure they're for a 14b/16g...let me know and I'll send em out Tuesday.
Posted By: Ryan Laliberte
Re: Pay it forward - May 18, 2009 03:22 am UTC
Just make sure they take a 22mm wrench, not a 19mm.
Posted By: Stacey Shaw
Re: Pay it forward - May 18, 2009 07:29 am UTC
Did you find the motor mount? Is it the one by the timing belt or the front of the car by the rad? I got both, i believe, if you don't mind waiting a few days for them via post from Alberta.
Posted By: Ryan Laliberte
Re: Pay it forward - May 18, 2009 03:32 pm UTC
By the rad is what we need. 1G AWD.
Posted By: Stacey Shaw
Re: Pay it forward - May 18, 2009 03:51 pm UTC
OK I'll check and see which it is and let you know later today.
Posted By: Stacey Shaw
Re: Pay it forward - May 19, 2009 02:41 am UTC
Crap, I have every mount but the right one. I even checked my spare block and it had the back motor mount.
Posted By: Louis Savard
Re: Pay it forward - May 19, 2009 02:46 am UTC
The banjos are 19mm
Posted By: Stacey Shaw
Re: Pay it forward - May 19, 2009 03:34 am UTC
And wouldn't you know it, the spares I have are also 19mm.
Does anybody have the little change holder that sits just ahead and to the left of the shifter? (1GB Manual Tranny).
Also anybody willing to change my front pads? Pleeease?
Posted By: Gates Perry
Re: Pay it forward - May 28, 2009 03:59 pm UTC
Does anybody have the little change holder that sits just ahead and to the left of the shifter? (1GB Manual Tranny).
Kobie, I think I have a spare. I'll check when I get home tonight, if you'd like.
Thanks Gates. What would shipping be? Like $10? lol
Anybody have decent front rotors they're willing to part with? Mine are basically toast
Posted By: Joe Esmama
Re: Pay it forward - June 08, 2009 12:38 pm UTC
Also anybody willing to change my front pads? Pleeease?
Hey if you find a decent rotors/pads, come over my place and i'll help you work on it.
Posted By: Cody Dyck
Re: Pay it forward - July 11, 2009 02:06 am UTC
no one has the fan connectors? I really want to get this new fan in!
Did you ever find these, I have a parts car that probably has them on it.
Anyone have a working Alternator for 1G?
Posted By: Mike Petro
Re: Pay it forward - November 03, 2009 07:06 pm UTC
Want one that squeals? Lol. It *does* hold a charge.. just... squeals. Was told that the its the alternator bearings.
Not sure how long it will last, but I drove with it for over a week and it was fine.
Want one that squeals? Lol. It *does* hold a charge.. just... squeals. Was told that the its the alternator bearings.
Not sure how long it will last, but I drove with it for over a week and it was fine.
I think I'll have to take you up on that offer Mike. How bad is the squeal?
Posted By: Mike Petro
Re: Pay it forward - November 04, 2009 03:02 pm UTC
It's a pretty annoying squeal...
I can let you know when the alt is removed, hopefully it's within the next few days
Okay, hopefully my car will still be parked on the road lol
Posted By: Mike Eng
Re: Pay it forward - July 28, 2011 07:18 am UTC
I need a coolant overflow bottle
Have a custom FMIC up for grabs. it's LONG and well, if someone wants it. They can have it. I have pics, just pm me.
Posted By: Mike Eng
Re: Pay it forward - August 29, 2012 06:15 pm UTC
still have that fmic, might work on a 1g better than a 2g...?
free!!!!!! pm me
Posted By: Mike Petro
Re: Pay it forward - August 29, 2012 07:42 pm UTC
I think I have one Mike, but I MIGHT be missing the cap...
Posted By: Mike Eng
Re: Pay it forward - August 29, 2012 07:47 pm UTC
I found a overflow bottle a long time ago lol, I was just posting about the fmic.
Posted By: Mike Petro
Re: Pay it forward - August 29, 2012 07:48 pm UTC
Oh duurr.. 2011.
Posted By: Pedro Suarez
Re: Pay it forward - September 15, 2012 08:51 am UTC
free fmic you say
do you have any pics?
Posted By: Garret Sliva
Re: Pay it forward - November 02, 2012 04:34 pm UTC
Hey guys!
I figure this is a long shot, but I might as well post this up here.
I am putting together a team for the ChumpCar world series next year. I will be using a 1991 Eagle Talon Tsi AWD, and trying to do us proud! I had previously done some races with a local in his Dodge Neon, but decided I wanted to build my own car.
I am asking if you guys have anything to donate to the cause, I would be extremely grateful!
Just to give you an idea of some things that we need:
Control Arms, Spare 3 bolt rear axles, 2g Dual Piston Calipers, 1g Rear Calipers, etc
as well as engine parts like spare 450cc injectors, fuel line from filter to rail, stock MAS, Stock Intake Manifold, Stock 2g Exhaust Manifold, etc.
Any parts that you guys feel are just kicking around that you wouldnt mind donating to the cause would be fantastic. Obviously I know I am stretching the limits of this thread with this request, but hey, worth a shot right?
Thanks guys,
Garret.
Posted By: Mike Eng
Re: Pay it forward - November 02, 2012 04:37 pm UTC
free fmic you say
do you have any pics?
sorry pedro, i didn't see this post until now.
if you're interested i don't mind send you pics. actually, i'll post them here, hang tight..
Posted By: Andrew Trapp
Re: Pay it forward - November 02, 2012 07:21 pm UTC
Damn, wish you posted this earlier Garret, I would have sent down my stock injectors with the brakes.
Posted By: Garret Sliva
Re: Pay it forward - November 23, 2012 05:14 pm UTC
I would just like to thank Andrew Trapp and Mike Kuttschrutter for their support so far! I really appreciate the contributions they have made towards getting this car ready for ChumpCar!
I keep forgetting to take pictures when I go work on the car, but I plan on starting a build thread here for all to see, and hopefully that will force me to start documenting the build better.
Posted By: Mike Eng
Re: Pay it forward - February 15, 2013 10:27 pm UTC
I would just like to thank Andrew Trapp and Mike Kuttschrutter for their support so far! I really appreciate the contributions they have made towards getting this car ready for ChumpCar!
I keep forgetting to take pictures when I go work on the car, but I plan on starting a build thread here for all to see, and hopefully that will force me to start documenting the build better.
Would this thing help you guys?
Free to good home
Posted By: Garret Sliva
Re: Pay it forward - August 15, 2013 04:23 pm UTC
Hey, sorry Mike I didnt look at this section for months. I appreciate the offer, but sadly, we would get penalized for running an aftermarked intercooler. Ridiculous I know, but they see it as a performance enhancement.
I am wondering if anyone has any factory stereo mounting brackets for a 1g. I need one for my winter car, someone decided to help themselves to my stereo. I have a spare bezel and a spare stereo, but I dont have the brackets that you screw to the stereo, then to the dash to hold it in place. If anyone has I would really appreciate that.
Thanks,
Garret.
Posted By: Mike Eng
Re: Pay it forward - August 15, 2013 05:16 pm UTC
It's ok. I still actually have that fmic in my garage rafters.
Did the crooks damage anything getting into the car?
Sucks big time! sorry to hear Garret.
Posted By: Garret Sliva
Re: Pay it forward - August 15, 2013 05:58 pm UTC
Nah, this car was left unlocked apparently on my parents driveway for the past year or so. not even sure when it happened to be honest. Thankfully looks like someone was at least kind enough to bring their own screwdriver haha. They didnt just yank the stereo out, they actually removed it.
Im not to hearbroken, its been broken for almost a year with a blown transmission and I just didnt have the motivation to fix it untill recently. The stereo was probably 5 years old or more, and only worth maybe $40.
Posted By: Mike Petro
Re: Pay it forward - August 16, 2013 03:08 am UTC
Do you still need an intake manifold? I believe I have one in my parents garage. You're in Regina though... and it's pretty heavy... Hmm..
If you don't want it, and someone else does - feel free to take it away.
Posted By: Mark Bondy
Re: Pay it forward - August 16, 2013 03:11 am UTC
I have a black rear bumper from a 92 talon if anyone is interested... free, pick up only.
Posted By: Garret Sliva
Re: Pay it forward - August 16, 2013 03:16 am UTC
Thanks for the offer, but I've got a few manifolds now. Still looking for stuff likecontrol arms or hubs and suspension components.
Posted By: Terry S
Re: Pay it forward - August 16, 2013 03:39 am UTC
Thanks for the offer, but I've got a few manifolds now. Still looking for stuff likecontrol arms or hubs and suspension components.
I've got rear uppers and a bunch of other stuff for a 2g if that helps?
Posted By: Garret Sliva
Re: Pay it forward - August 27, 2013 06:06 pm UTC
Does anyone at all have the factory stereo mounting brackets? I am even willing to pay for them, I just cant believe how hard they are to find.
Lol I gave them away free
Posted By: Garret Sliva
Re: Pay it forward - August 27, 2013 06:26 pm UTC
And im pretty sure I just tossed a set last year while cleaning the garage.
Moral of the story, never throw anything away, ever.....
Posted By: Mike Petro
Re: Pay it forward - August 27, 2013 06:41 pm UTC
Moral of the story, never throw anything away, ever.....
The most popular quote from the show Hoarders
Posted By: Rob Strelecki
Re: Pay it forward - August 27, 2013 07:14 pm UTC
They laugh at my hording tendencies now, but I will be the one laughing when the world goes to sh!t and I'm the only one with the stuff!!
guess what I just found
I even have the small bolts
Posted By: Garret Sliva
Re: Pay it forward - August 28, 2013 10:01 pm UTC
Oh I do have to ask, but is that for a 1g or a 2g? If it is a 1g I will take it in a heart beat!
Oh I do have to ask, but is that for a 1g or a 2g? If it is a 1g I will take it in a heart beat!
2g
Posted By: Garret Sliva
Re: Pay it forward - August 29, 2013 03:52 am UTC
Damnit! haha oh well, thanks for the effort!
Posted By: Garret Sliva
Re: Pay it forward - October 23, 2013 06:58 pm UTC
I am looking for a single good condition exhaust valve. Im sure someone has upgraded and still has a few used valves kicking around? This car I bought has one burnt valve and that looks like all it would take to get it back on the road.
Thanks,
Garret.
Posted By: Anthony Hiscock
Re: Pay it forward - April 23, 2014 07:25 pm UTC
Looking for 2G turbo water lines and banjos.
Posted By: Jay Stacey
Re: Pay it forward - April 23, 2014 09:21 pm UTC
The t25 has both lines but one is sawed off... the Big16g has the line but its a little differant.. Would these lines work?
Posted By: Anthony Hiscock
Re: Pay it forward - April 23, 2014 11:03 pm UTC
I got a set from one of the locals after, thanks though Jay.
Hey mike, if you still have that intercooler, it would help me out! Let me know...
I have a brand new balance shaft belt I bought before removing the timing belt cover. turns out the PO deleted it lol If anyone wants it they can have it.
Posted By: Mike Eng
Re: Pay it forward - August 29, 2014 05:44 pm UTC
I believe it's spoken for. That is if Jay Stacey still wants it.
Posted By: Jay Stacey
Re: Pay it forward - August 29, 2014 07:24 pm UTC
I would like it.. Yes. Some day I will get it!!
Posted By: Mike Eng
Re: Pay it forward - August 29, 2014 07:29 pm UTC
Lol can likely fit it in a box and get there for probably $20. But I'm telling you it's quite long. I ran it on my '95 240sx.
Posted By: Jay Stacey
Re: Pay it forward - August 30, 2014 05:28 am UTC
You need to measure it for me..
Posted By: Corte Beech
Re: Pay it forward - August 30, 2014 05:33 am UTC
29.5 x 7.5 x 3. Core is itself is 27" Long.
Those are the dimensions he gave me. Well if were talking about the same intercooler.
Posted By: Jay Stacey
Re: Pay it forward - August 30, 2014 06:17 am UTC
Maybe.. He said you were buying a differant one from him???
Posted By: Mike Eng
Re: Pay it forward - August 30, 2014 06:49 pm UTC
That is a different one. The one with those dimensions was the one on my car. Yonaka type 10.
Posted By: Kyle Dolson
Re: Pay it forward - September 01, 2014 01:45 pm UTC
Hey jay..
That turbo in the back... Is that the big 16g? I ask because of that oil return line I see has me salivating. Mine is leaking oil where the return line and oil pan meet so I'm changing both.
Let me know if we can work somethin out!
Thanks a lot!
Posted By: Frank Young
Re: Pay it forward - May 02, 2015 10:56 pm UTC
A big THANKS ! to who ever out there , spontaneously offered a pair of gas struts to my wife while she was out and about on errands this morning. She was driving my red 2G in Mississauga.
Your random act of kindness is just inspiring, I'll be sure to do the same.