Posted By: Bryan Lawrence
$10 breaker bar
Posted By: Jason Drew
Re: $10 breaker bar - June 19, 2014 06:29 pm UTC
Perfect timing, I'll replace my 2 broken ones and get a couple more 
Posted By: Bryan Lawrence
Re: $10 breaker bar - June 19, 2014 06:39 pm UTC
Jason are they any good? If these turn out to be longer than my current one I will probably grab one.
Posted By: Mike Eng
Re: $10 breaker bar - June 19, 2014 07:02 pm UTC
These have been on sale for a while. Grabbed a couple of them already, about 3 weeks ago. They seem ok, worth the money for at least one.
Posted By: Daren Peacock
Re: $10 breaker bar - June 19, 2014 07:02 pm UTC
I bought this a couple years back, haven't had any issues but also don't use it that often. If it ever breaks, they typically have a no questions asked replacement policy.
Posted By: Brian O'Day
Re: $10 breaker bar - June 19, 2014 07:14 pm UTC
I got another one last week from CT. They had a sale for a 20-250lb torque wrench and one of these breaker bars for $57.
Posted By: Chris Browning
Re: $10 breaker bar - June 19, 2014 07:20 pm UTC
I got one for this price about 6 months ago, never had an issue, great deal IMO.
Posted By: Jason Drew
Re: $10 breaker bar - June 19, 2014 07:37 pm UTC
They're 24" long, which is just about perfect for most jobs, use a ratchet if you want something shorter.
I bought 2 a year or so ago when they were on sale for $14 and I've done lots of work with them, only issue I had was snapping them both off this week with a 4' pipe on them.
I bought 2 a year or so ago when they were on sale for $14 and I've done lots of work with them, only issue I had was snapping them both off this week with a 4' pipe on them.
Posted By: Scott McIntyre
Re: $10 breaker bar - June 20, 2014 02:26 pm UTC
I had a 24" breaker bar from Princess Auto, and snapped the 1/2" drive in half trying to get my axle nut off. Then I ran to Canadian tire, got one of these 24" breaker bars, put my 4ft long jack handle over the end of it for more leverage, and finally loosened my axle nut. The CT breaker bar was bending like a bow, but it held on and got the job done. 
Posted By: Jeremy Gilbert
Re: $10 breaker bar - June 20, 2014 02:28 pm UTC
I must be the only guy on the planet who doesn't have trouble getting axle nuts off..
Still picked one of these up though
Still picked one of these up though
Posted By: Jason Drew
Re: $10 breaker bar - June 20, 2014 02:43 pm UTC
Originally Posted by Jeremy Gilbert
I must be the only guy on the planet who doesn't have trouble getting axle nuts off..
Still picked one of these up though
Still picked one of these up though
I only have trouble on Subaru's, even on my 94 Ram, which takes a 1 3/4" socket, comes right off with one of these bars and no cheater.
Posted By: Mike Degli Angeli
Re: $10 breaker bar - June 20, 2014 03:05 pm UTC
Why do it by hand? 1000ft/lb impact works wonders!
Posted By: Daren Peacock
Re: $10 breaker bar - June 20, 2014 07:18 pm UTC
Originally Posted by Jeremy Gilbert
I must be the only guy on the planet who doesn't have trouble getting axle nuts off..
Still picked one of these up though
Still picked one of these up though
Nope, don't even need the 24" bar, mine come off easily with an 18" bar. My axles slide in & out by hand as well
Posted By: Jeremy Gilbert
Re: $10 breaker bar - June 20, 2014 07:40 pm UTC
Phew.. I'm not alone 
Posted By: Rob Strelecki
Re: $10 breaker bar - June 20, 2014 08:11 pm UTC
I just use a 1' cheater bar (engine stand handle) on a 3/8" ratchet. You guys don't break enough axles!
Posted By: Reza Mirza
Re: $10 breaker bar - June 20, 2014 08:31 pm UTC
Originally Posted by Rob Strelecki
I just use a 1' cheater bar (engine stand handle) on a 3/8" ratchet. You guys don't break enough axles!
Same here, except I use a 4' steel pipe on a 3/8" or 1/2" ratchet
Nothing beats it!