Posted By: Ian Burnside
Wideband logging - July 27, 2014 09:40 pm UTC
WEll, i'm finally hooking my wideband up for logging. I was reading the wiki and was going to use pin 15 to log but it says that its not 100% compatible with my wideband. (AEM) Does that mean that i shouldnt use that input or i can just try and if it doesnt work try another. Input is greatly appreciated
Posted By: Stephan Tanchak
Re: Wideband logging - July 27, 2014 11:27 pm UTC
Ecmlink? Wire it into your front or rear o2 sensor plug in the ecu, then you've got to play with finding the right voltages.
[video:youtube]
http://youtu.be/k3BIR6OOphg[/video]
Posted By: Ian Burnside
Re: Wideband logging - July 28, 2014 12:25 am UTC
I was going to use the egr input on my 1G as I no longer have the egr. Figured that way would be the easiest until i started reading more and says that its not always 100% compatible. If using the O2 input and using narrowband sim doesnt cause an issue, ill just use that.
As long as you set your switch over point correctly NB sim won't be an issue. Emclink wiki has a chart for that.