Gauging interest 1g fwd turbo partout

So I blew my tranny and have a awd I can fix up, so I am thinking about parting this out, 1991 fwd turbo lots of pics can be found here
http://ca.dsm.org/forums/ubbthreads.php?ubb=showflat&Number=291447#Post291447
The car has everything execpt tranny, and cvs are spoken for if I part it out.
It has a
turbosmart b/c,
act 2600 pp and 6 puck sprung,
urthine engine mounts,
small frontmount intercooler + homemade piping
maf-t and 3 inch gm maf
spare 3inch gm maf
magnus heat barrier
ss clutch line
2.5 inch axle back with reactive muffler fwd
black mitsubishi valve cover, semi polished letters, satin black finish, looks mint
autometer gauges volts and water temp no lights
rims pics can be found here
http://ca.dsm.org/forums/ubbthreads.php?ubb=showflat&Number=299427#Post299427
and all other stock partswill post pic,s of other parts when I get a chance

GOOD GOD I NEED PARTS!!!

I/We need the two brackets on the subframe that hold the control arm bushing to the subframe.

If you part it out, I will end up grabbing the valve cover from you for my 2G

How much for the maf-t and GM maf?

Pm's answered, I would be willing to sell the 1g(91)/2g(98) coversion, but never finished it. With a 1gb hood I think it would be done(might have to grind and glass a bit) anyways whats spoken for is

cv shafts
valve cover
tranny bolts
tube mainfold

I also have a set of ebay 2gb eclipse headlights that I won't be using, among other things, I will look through my parts. Everything has to go as I need cash to finish the awd and safty and e-test it.

20psi or 30psi MBC?

Happen to have a good 14B Brendan?

Not sure

I have 2 or 3, I'll have to double check the condition

Are you parting this?

I think so, Had some interest and think I will need parts from it for the awd, but have to get the AWD going and outta the shop before I can bring the fwd there to start the part out, I can sell lots of the parts aslong as its still driveable/moveable.

Are the ebay headlights projectors?

Yes, chrome housed, and cheap Pm me if interested

Ahhh, you lost me at chrome.

Thanks Brendan!

lol, here are some the only pic's I have of them, incase anyone else is interested, say $50 as I had to go to Barrie to get them.

maf-t an gm 3inch maf - sold

-Parts that are gone-
maf-t and 3 inch gm maf
cv shafts
valve cover
tranny bolts
tube mainfold




Do you still need these? and will I be able to tow rope the car out of there? If not you might have to wait a week or so depending on how everything goes with the awd

I'll take the therostat housing if you have one.. let me know how much

Can those projectors be taken apart so one could paint the housing?

You can take apart any housing, you just need to bake it for a little bit in the oven to soften up the silicone.

Ya, thanks Brandon, part out will beguin in the next day or two, so I'll be between the awd and the fwd.

Turbosmart bc - sold

Brendan, you will still be able to roll the car.

If you look underneath the car on the subframe:



I need those 2 brackets. They are held on by 2 14mm nuts and 1 17mm bolt. The bushing bolt is also 17mm. The car will still roll and you can even do it with the wheels on the ground.

Will pay for the time, the part and the shipping to get it here. This is rather urgent.

Should have it out in the next day or two

-Sold parts-
cv shafts
tranny bolts
tube mainfold
turbo smart b/c

-On hold-
valve cover
shifter linkages and mounting plate
and side skirts

Everything else is up for grab if it doesn't end up in the AWD, pm me with what you need, I already have the cvs out and tranny should be out a bit later, also the motor in it is good just not sure what kind of pistons(2g/forged/ or n/t) I have ran this motor for 2 years with out a problem, I did a compression test that turned out good will do another and get pics and the lifters are ticking.

-Sold parts-
cv shafts
tranny bolts
tube mainfold
turbo smart b/c
Starter
Alt
injectors
oil cooler

-On hold-
valve cover
shifter linkages and mounting plate
and side skirts
act 2600 clutch

Parts to add I have 2 1g maf's
stock 95 tsi side skirts(sanded)
stock 95 fog lights(mint)
2 brand new in the box tie rods