91 AWD Roller
Posted By: KEVIN KIRELUK
91 AWD Roller - November 12, 2013 10:45 pm UTC
This chassis is perfect for a project. Chassis will come with a huge FMIC, LSD 4-bolt rear end, 2Gb 17" wheels, and a Haltech stand-alone engine management system. Car is full black, not the factory 2-tone. Pics available upon request.
$1000 firm! Please pm
Posted By: KEVIN KIRELUK
Re: 91 AWD Roller - November 12, 2013 10:54 pm UTC
I can even throw in a transmission along with it.
Posted By: KEVIN KIRELUK
Re: 91 AWD Roller - November 13, 2013 07:00 pm UTC
I would like to add the car has after market suspension - KYB / Eibach springs, along with dual piston BIG brakes up front
When I was taking pics I also found it had an AEM Multi-channel Capacitive Discharge Ignition Module along with the Haltech EMS
The parts alone are worth much more than my asking for price of $1000
Posted By: KEVIN KIRELUK
Re: 91 AWD Roller - November 20, 2013 03:28 pm UTC
Well I made some room in the driveway, and I like the way it looks with 2 DSMs. You guys slept on this, as the electronics alone was worth more then the asking for price. I'll be keeping the it
Posted By: Bryan Lawrence
Re: 91 AWD Roller - November 20, 2013 03:29 pm UTC
If you are interested in selling again in 2 years(when I have more space) I will definitely pick it up
Posted By: Corte Beech
Re: 91 AWD Roller - November 20, 2013 05:45 pm UTC
Wanna sell me the Haltech?
Posted By: KEVIN KIRELUK
Re: 91 AWD Roller - November 20, 2013 10:32 pm UTC
Nope! It's all or nothing. I have no plans to part it out. There's not much missing to make it complete, so it's going to stay that way.
Bryan, in a couple years she'll either be back on the road, or gutted doing some form of racing
Posted By: Bryan Lawrence
Re: 91 AWD Roller - November 21, 2013 02:06 pm UTC
Well if she is caged then, my interest will definitely be piqued!!
Posted By: KEVIN KIRELUK
Re: 91 AWD Roller - February 05, 2014 11:48 pm UTC
I'm going to put this back up for sale for the time being.
Again 91 awd with
LSD 4-bolt rear end
24x12x3.5" FMIC Garrett core with piping
Haltech EMS with GM 3BAR+IAT sensors for speed density
AEM ignition module
Big fuel pump
Dual piston brakes
KYBs with Eibach springs
2Gb 17" wheels
Transmission with t-case (notchy 2nd gear)
ACT2600 w/6puck & Fidanza flywheel
Rad with slim fan
Manual steering rack
$1000 obo
Posted By: KEVIN KIRELUK
Re: 91 AWD Roller - February 06, 2014 12:05 am UTC
Posted By: Bryan Lawrence
Re: 91 AWD Roller - February 06, 2014 02:10 am UTC
So just needs an engine put in and that's it?
Posted By: KEVIN KIRELUK
Re: 91 AWD Roller - February 06, 2014 02:45 am UTC
No exhaust either...
Posted By: Corte Beech
Re: 91 AWD Roller - February 06, 2014 03:15 am UTC
Whats the rust like?
Posted By: KEVIN KIRELUK
Re: 91 AWD Roller - February 06, 2014 03:38 am UTC
Rust in the usual areas, but nothing too bad.
Posted By: Reza Mirza
Re: 91 AWD Roller - February 06, 2014 02:57 pm UTC
The Garrett FMIC and Haltek on this car alone are worth more than the asking price, everything else is a bonus. I'm surprised no one has bought it by now. If I had the space, I would buy this in a heartbeat.
Posted By: Bryan Lawrence
Re: 91 AWD Roller - February 06, 2014 03:09 pm UTC
Yeah that's my issue, I don't have space. It's killing me that I can't scoop this up.
Kevin if I can get space I will let you know.
Posted By: Jay Stacey
Re: 91 AWD Roller - February 06, 2014 09:12 pm UTC
im too busy to think about it. but if people want enough parts from this... I may go grab it up and part it out.
Posted By: KEVIN KIRELUK
Re: 91 AWD Roller - March 29, 2014 03:57 pm UTC
Shoot me an offer...
Posted By: kent Hennigar
Re: 91 AWD Roller - April 01, 2014 01:24 am UTC
Call me tommrow Kevin I might have a home for this car =)
next to my other 3 DSM`s =)
Posted By: KEVIN KIRELUK
Re: 91 AWD Roller - April 01, 2014 01:56 pm UTC
I've had requests for parts off the car, so I just want to make one thing clear. I will not part out this car!!! It'll either be sold in one piece or I'll be keeping it for a drag car project.
Posted By: Lucian Marta
Re: 91 AWD Roller - April 01, 2014 09:57 pm UTC
I like the latter
Posted By: Murtaza Saadat
Re: 91 AWD Roller - April 02, 2014 07:55 am UTC
What is needed to make it drivable/complete. Just an engine?
Posted By: Bryan Lawrence
Re: 91 AWD Roller - April 02, 2014 11:13 am UTC
Why don't you scroll up and check, that was already asked.
Posted By: KEVIN KIRELUK
Re: 91 AWD Roller - April 02, 2014 12:44 pm UTC
Again, I am not parting out but these are the general used prices of these parts as sold on most DSM forums
Again 91 awd with
LSD 4-bolt rear end ($400)
24x12x3.5" FMIC Garrett core with piping w/BOV ($300, it's not your average cheap china-cooler)
Haltech EMS with GM 3BAR+IAT sensors for speed density ($350)
AEM ignition module w/coil ($150)
Big fuel pump ($75)
Dual piston 1G big brakes ($100)
KYBs with Eibach springs ($200)
2Gb 17" wheels ($150)
Transmission with t-case (notchy 2nd gear) ($200)
ACT2600 w/6puck & Fidanza flywheel ($200)
Rad with slim fan ($75)
Manual steering rack ($175-250)
So a rough estimate in parts alone, is roughly $2,400. That's not even including the chassis itself. Forgot to mention the car also has a brand new OEM clutch master cylinder that's $175 right there!
Posted By: KEVIN KIRELUK
Re: 91 AWD Roller - April 02, 2014 12:49 pm UTC
Aside from the obvious (motor/turbo/exhaust), all the car needs is a non-abs proportioning valve. That's $96 brand new from Ziggy if too lazy to source a used one.
Posted By: KEVIN KIRELUK
Re: 91 AWD Roller - April 07, 2014 06:37 pm UTC
Okay guys, I've had quite a bit of interest as of late. Must be the warm weather or something. I've decided against another project and am looking to get rid of 'the Fugitive' and focus on getting my 93 back on the road.
I'm willing to take the first reasonable offer just to get it out of here. Might even be open to trades. Shoot me an offer
Posted By: Mark Bondy
Re: 91 AWD Roller - April 08, 2014 01:59 am UTC
Would somebody please buy this before i"m forced to lowball?
I may pick this up. Will have to come check it out soon.
Posted By: KEVIN KIRELUK
Re: 91 AWD Roller - April 18, 2014 07:18 pm UTC
Might as well lock this up. Once I take what I want from it, she's going to the scrap yard.
May The Fugitive rest in peace!