DSM Misc Parts

Extremepsi 2.5" ID silicone 90 elbow, black, leg length ~4", top quality that can handle real boost (not ebay junk, cost $50+). Brand new, never run, small spot of grey rtv on it $20



Southbend SS Pressure Plate (2200lb) & TZ/FE disk. PP is in great shape but has a slight taper, ~.013 (used PP should be machined anyway). Disk has a matching taper on the PP side ~.282 thick at outer edge (thinnest portion). Say an easy 50% life left at thinnest portion, didn't have any issues holding my DTM83HTA @30psi. Run as is, or machine PP & use a new disk, $80







3mm wheel spacers, 5x114.3mm & 5x108mm, 67.1mm bore. Bought them, & mounted to find out they wouldn't work for me, paid $80, $50



K&N cone Filter, 6" long filter, with a 4.5" inlet size (works with stock MAF adapter),PN RU-3480 $30





2g Keyless FOB, looks like these will currently run you $50+ from Ebay (with exchange & shipping) & are in worse condition. $30





Parts can be picked up in the Concord (~Hwy 7 & Dufferin) are or the Newmarket area depending on time, shipping is always available at buyers expense.

Updated list:

Silicone Elbow: $20
Spacers $40
K&N Filter:$30
Keyless FOB:$25

Note quite ready to sell but in the not so distant future I will be adding:

2.5" FP30 Series O2 Housing w/external dump (ceramic coated)
Tial V44 Wastegate

Updated list:

Silicone Elbow: $20
K&N Filter:$30
Keyless FOB:$20

2.5" FP30 Series O2 Housing w/external dump (ceramic coated)
Tial V44 Wastegate

Pics and price on the WG and Housing?

Haven't got around to taking pics yet as I'm not quite ready to sell (finally treated myself to an MV-R but it hasn't shown up yet), but will post pics likely in the next couple weeks.

WG is in excellent condition, top has been ceramic coated black bottom is rust free (car only see's minimal summer driving), comes complete as it did when new (box, clamps, weld on flanges, etc), .9 bar. Not 100% sure on price yet but was thinking $240.

Updated list:

Silicone Elbow: $20
K&N Filter:$30
Keyless FOB:$20

2.5" FP30 Series O2 Housing w/external dump (ceramic coated)

Tial V44 Wastegate $240

Original owner/authentic Tial. The WG was originally anodized black but quickly changed to doodoo brown so I had it ceramic coated black, which doesn't change colour.

Unit has a few marks on the ceramic coating but overall is in great shape & works perfectly. Ordered it as .9 bar (~13psi) but looks like at some point I added another spring (small red .3bar), so it comes with two springs.

Unit is complete as new with clamps, nuts/bolts, brand new weld on inlet & outlet flanges, fittings, box, etc.

Updated list:

Silicone Elbow: $20
K&N Filter:$30
Keyless FOB:$20

2.5" FP30 Series O2 Housing w/external dump (Swain Tech ceramic coated), pics to follow

Updated list:

Silicone Elbow: $20
K&N Filter:$30
Keyless FOB:$20

2.5" FP30 Series O2 Housing w/external dump & vband clamp(Swain Tech ceramic coated), can't upload a pic, but can email a couple if interested. The ceramic coating looks a little near the vband flange end but overall in great shape, just put on a new coat of high temp black, ready to go $240.

Edit: Info on the O2 housing:

http://www.forcedperformance.net/me...e=O2FP3025&Category_Code=DSM-Exhaust

Updated:

Silicone Elbow: $20
K&N Filter:$30
Keyless FOB:$20

2.5" FP30 Series O2 Housing w/external dump (Swain Tech ceramic coated): $220

Updated list:

Silicone Elbow: $20
K&N Filter:$30
Keyless FOB:$20

Edit: Have a 12" SPAL puller fan that I will be soon listing, excellent shape used for one summer for the AC fan, then had a configuration change & I can no longer run a fan on that side. Just need to get the part #/info when I get a chance.