Previous Thread
Next Thread
Print Thread
Rate Thread
Dorman Front Control Arms Won't Fit 1Gb FWD #455396
August 06, 2019 04:02 pm UTC
August 06, 2019 04:02 pm UTC
Joined: Apr 2002
Posts: 15,322
Loc: Loc:
Rob Strelecki Offline OP

morum foderator
Rob Strelecki  Offline OP

morum foderator
Senior Member, with Far TOO Much Time on Their Hands
*****
Joined: Apr 2002
Posts: 15,322
Loc: Loc:
Has anyone experienced this?

Aftermarket control arms:
https://www.dormanproducts.com/p-26311-520-837.aspx

Stock arm is on the bottom (opposite side for comparison). It has ES bushings. The big rear bushing is way off! Not a chance the new one will bolt up.
I flipped the bushing around (see bottom pic) and then it bolted up no problem. WTF? confused

[Linked Image]
[Linked Image]

Flipped bushing...

[Linked Image]


1993 Eagle Talon TSi FWD
13.8 @ 106 :::: 14.1 @ 117
Re: Dorman Front Control Arms Won't Fit 1Gb FWD [Re: Rob Strelecki] #455397
August 06, 2019 05:47 pm UTC
August 06, 2019 05:47 pm UTC
Joined: Aug 2010
Posts: 2,808
Ontario, Canada
S
Salomon Ponte Offline
Insane Member
Salomon Ponte  Offline
Insane Member
*****
S
Joined: Aug 2010
Posts: 2,808
Ontario, Canada
This thread might be of interest to you:

https://www.dsmtuners.com/threads/w...rman-vs-raybestos.402773/#post-152586715

Haven't experienced it personally as I rebuilt my stockers and of course those popped right back into place.


'92 Talon TSi AWD - 5 Speed/E16G/12.385s @ 115.13mph
Re: Dorman Front Control Arms Won't Fit 1Gb FWD [Re: Rob Strelecki] #455398
August 07, 2019 12:36 am UTC
August 07, 2019 12:36 am UTC
Joined: Apr 2002
Posts: 15,322
Loc: Loc:
Rob Strelecki Offline OP

morum foderator
Rob Strelecki  Offline OP

morum foderator
Senior Member, with Far TOO Much Time on Their Hands
*****
Joined: Apr 2002
Posts: 15,322
Loc: Loc:
That’s interesting! Mine look beefier than the replacements that guy got. Mine are more similar to the Raybestos arms.

I did some googling and see that the stock bushing sits a similar way in the stock arm. I think it would line up just like the ES does on my old arm.

Am I just doing it wrong? Does it require some front to back force to get the front pivot attached while the rear is loosely bolted up? I started with the front attached, assuming the rear should simply line up. It wasn’t working either way.

Re: Dorman Front Control Arms Won't Fit 1Gb FWD [Re: Rob Strelecki] #455399
August 07, 2019 03:02 pm UTC
August 07, 2019 03:02 pm UTC
Joined: Aug 2010
Posts: 2,808
Ontario, Canada
S
Salomon Ponte Offline
Insane Member
Salomon Ponte  Offline
Insane Member
*****
S
Joined: Aug 2010
Posts: 2,808
Ontario, Canada
Well, my experience is limited, but with my car(s) I've only rebuilt stock front control arms and I have used the ES bushings. I always attached the rear joints first and then swung it up to have the ball joint attach to the knuckle afterwards. That being said, I don't remember having to fool around much to get the 2 rear joints in place and bolted up. In fact, I'm quite certain I torqued the bolts to spec on the rear joint(s) prior to installing the knuckle so that I wouldn't have to do it with all that stuff in the way, and it all went together fine.

If you flip the bushing and everything lines up perfectly I'd run it like that, assuming you do some sanity checks and all the attachment points seem to be in the same approximate location. Seems like more of a bushing issue than a control arm issue, though that joint does seem to protrude slightly further out than the old one.

Last edited by Salomon Ponte; August 07, 2019 03:03 pm UTC.

'92 Talon TSi AWD - 5 Speed/E16G/12.385s @ 115.13mph
Re: Dorman Front Control Arms Won't Fit 1Gb FWD [Re: Rob Strelecki] #455400
August 07, 2019 03:12 pm UTC
August 07, 2019 03:12 pm UTC
Joined: Apr 2002
Posts: 15,322
Loc: Loc:
Rob Strelecki Offline OP

morum foderator
Rob Strelecki  Offline OP

morum foderator
Senior Member, with Far TOO Much Time on Their Hands
*****
Joined: Apr 2002
Posts: 15,322
Loc: Loc:
That really helps, thanks again!

To me it seems like they’ve added some metal that takes up the tapered front of the bushing, so the arm should use more of a symmetrical bushing.
Of course I’ll be SOL to use an ES bushing.

Oh well! I’ll run ‘em wink
Onward!

Re: Dorman Front Control Arms Won't Fit 1Gb FWD [Re: Rob Strelecki] #455401
August 07, 2019 04:14 pm UTC
August 07, 2019 04:14 pm UTC
Joined: Aug 2010
Posts: 2,808
Ontario, Canada
S
Salomon Ponte Offline
Insane Member
Salomon Ponte  Offline
Insane Member
*****
S
Joined: Aug 2010
Posts: 2,808
Ontario, Canada
As long as there's no slop, things line up, and nothing is seizing/locking up when it's in place I would run it. I feel like this is something you'll be able to tell pretty quickly whether it's working right or not, and it's an easy part to inspect for wear/play - just take the wheel off.

Any reason why you're not reusing your old ones with the ES bushings? They look to be in pretty solid shape - why not press in a new ball joint and call it a day?


'92 Talon TSi AWD - 5 Speed/E16G/12.385s @ 115.13mph
Re: Dorman Front Control Arms Won't Fit 1Gb FWD [Re: Rob Strelecki] #455402
August 07, 2019 04:43 pm UTC
August 07, 2019 04:43 pm UTC
Joined: Apr 2002
Posts: 15,322
Loc: Loc:
Rob Strelecki Offline OP

morum foderator
Rob Strelecki  Offline OP

morum foderator
Senior Member, with Far TOO Much Time on Their Hands
*****
Joined: Apr 2002
Posts: 15,322
Loc: Loc:
cool

See my rotor spacer thread:
http://www.ca.dsm.org/forums/ubbthreads.php?ubb=showflat&Number=454674

Not only were the stock arms BFH’d, when I needed ball joints last time, they wouldn’t press in, so they got welded. That was the start of the end for these guys.

Re: Dorman Front Control Arms Won't Fit 1Gb FWD [Re: Rob Strelecki] #455413
August 14, 2019 10:31 am UTC
August 14, 2019 10:31 am UTC
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
Bryan Lawrence Offline
Senior Member, with Far TOO Much Time on Their Hands
Bryan Lawrence  Offline
Senior Member, with Far TOO Much Time on Their Hands
***
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
I did after market too but mine were the mevotech and I didn't have that issue. I can take a peak at what Gus put on this car and see how they look if you want.


"Old Blue" 91 Talon TSi AWD
"Super Enthusiast" 91 Talon TSi AWD
Checkout DSMFAQ.com!
Re: Dorman Front Control Arms Won't Fit 1Gb FWD [Re: Rob Strelecki] #455416
August 15, 2019 11:58 pm UTC
August 15, 2019 11:58 pm UTC
Joined: Apr 2002
Posts: 15,322
Loc: Loc:
Rob Strelecki Offline OP

morum foderator
Rob Strelecki  Offline OP

morum foderator
Senior Member, with Far TOO Much Time on Their Hands
*****
Joined: Apr 2002
Posts: 15,322
Loc: Loc:
Sure, thanks Bryan. It wouldn't hurt to have another measurement like this one. Length from bushing stop to front pivot:

[Linked Image]

I did a test drive and everything seems fine!


Powered by UBB.threads™ PHP Forum Software 7.6.1.1