After about 12 passes i was only able to get 11.6/136.5 with a 1.93 60foot, i got 3 136mph at 34psi. Just could not hook up spinning all 4 in 3rd. got my best 1/8 mile 106mph.

Crushed 1G Rock. I wish I would of never get rid of mine.

IIRC; you crush it by about 3mm and you are good to go till the cows come home!!!

Ghilsain

Good results Paul. You should get more traction later in the year.

Same for you Garrett.

Ghislain

ok so, I'm leaking boost some how...or my wastegate is getting stuck open (my actuator is not OEM)

anyway, traction, or lack there of, was the major player...

If you kept last year's setup, and added slicks you'd be running much quicker! FWIW around 10years ago I was 104mph thru the 1/8th with an old school FP Red and 30psi. Work on the tune some more, I'm sure there's plenty of the power left on the table even with less boost.

Or take your car to Cayuga and blast off a 10 on a real track lol

I honestly think that I'm done racing that car
. Had it for the last 19 years now its time
just to enjoy it for what it is. I just don't have the time to fiddle with it. Its more then fast enough for me and it always puts a smile on my face.

I'm just teasing I'm sure WOT always puts a smile on your face.

Paul, at least it was fun watching you chase down that 700+ HP new shelby!
On a side note, my (new to me) 2004 PT GT did 15.3 @ 88 all stock!

Got 1 pic from last night showing Paul's 3794 Talon, friends 300 + hp Mazdaspeed, my Pt and the V6 '05 modded Stang I raced, most times we'd be even other times he'd catch and pass me just at end!
[img]http://[/img]

I'm going to be at shannonville next Monday...but for a lapping session! Straights are for loosers, real men need steering wheels.

If anyone wants a ride stop by! (this assumes my car makes it there and through the sunday autocross...so no guarantees:)

So Jamie Valcamp and I ran tonite! would have been nice to see some more DSMs!!!

First couple runs for me were smooth but I was only running 23psi so I kept running consistant 13s. Tried raising the boost but one turn on the MbC put me at 30psi and my Blitz BOV wouldnt hold it. Lowered it to 26psi... And It ran awsome... But created a boost leak. By the time we found the leak, it started raining. Untill next week!

Cool, but too bad we missed you guys-for sure nxt time!

A couple of vids from Friday. Looking good out of the hole Jay!
https://www.youtube.com/watch?v=XAQaCADOweQ

http://youtu.be/Qg2-H3bRh_s

Wish I could of been there. Should be able to make it next time.

Ghislain

There is one this Friday correct? If so I'll be there!!

This friday there is a Mix n Match! Im hoping to have 2 cars there. And then saterday there is a armdrop. So this weekend would be a god time to visit!!
I wont be going to armdrop.... Too busy

Well I went yesterday. Did 5 passes and finally got in the 13's with a 13.8 & 13.9 Not bad for a car with just a Exhaust and more boost!! Plus I think my tiny 14B is on it's way out or the housing is cracked it's original with 185K miles!! Spool time is way down.

Then after that I just killed it on the Nelson track for the rest of the night

Proper!!!

I'll be leaving next Saturday and will be back around 15 July. We should have a beer call at my place mid July and try to step out for a local before the SO.

Ghislain

Mix & Match Aug 1st I guess...

I'm at the next one for some shakedown passes on the old setup.

I should be at the Shediac N.B. Lobster Festival. Otherwise I'd be beating down on the newly rebuilded Tranny!!!

Let me know how the shake down goes and I'll let you know how big the dozen of Lobster I ate were...

My first event will be 1st Aug. Then it will be the SO!!!

Ghislain

Anyone going this saterday to shannonville mix n match?

Still in N.S.

Ya.. I know Ghis.. I see you having a blast on facebook. Were trying to plan to all get together on August 1st. You said will be at that one.. And its the last one before SO.

I need to replaace the front inner boots on sandras 1g for her to race. And I have a few more things to iron out on my 2g... To be ready for tomorrow.n

I have one of those special Pliers for re-installing the Clamp back on. You'll like it!!!

Ghislain

BUT... Im doing them tomorrow! is there a key for your house? lol. whats your garage combo? I would much prefer that tool.

No key, no combo and the alarm is on!!!

Ghislain

Cayuga is about 600 ft above sea level. It's harder to run a good time there compared to Shannonville.

HAHA, and I always thought it was the other way around. The real ballz are at the drag strip, not 300 WHP cars driving in circles on the circuit...

I'm not sure about that, have you ever been to Shannonville? lol If you want to see a track where prep makes it more slippery than the street -this is it!

Ok guys....
August 1st...
Last mix n match before shoot out!.

We are planning both dsms and a truck'n'trailer. Full of tools!

Lets get a good turn out!!

As previously stated I'm planning to be there!!!

Ghislain

Why all the tools? Do you expect to break down? For the 4 hours it goes on for, what do you really expect to fix in that short of time?

Pfft... If I can't fix it with a set of pliers or a 10MM wrench, it's getting brought back to the shop.

Should have it back on the road next week.

its more for encouragement for people to show up. Plus Im a firm believer in Murphys law

Lol if my car breaks at the track I wouldn't even try fixing it.


I probably will be a no show....











































In the Galant Muahahahaha.
More than likely bringing the trailer queen

Ain't that the truth!

I got my tune figured out sort of...should be back in the 13's next time

Sooo.. whos going tomorrow??


I will be hopefully

im in

In