As the topic states. My car turns over but never comes close to catching. There is no spark. I pulled plug out and nothing. Want to check the coil pack but am unsure what wires are connected to it. 1 is the power sourse, what are the others.

Anyone happen to know of a diagram of it? Any link perhaps. I have searched on here, VFAQ and googled it and no mention of what is attached to it.

Plesae reply ASAP, at the garage now trying to figure it out what it is.

Thanks

If you have a haynes manual it tells you how to check the coil pack. Also, check the Cam and Crank angle sensors, the harness connectors for them will be under the fpr somewhere.
I just had the same troubles after we swapped the head, no spark whatsoever. Turned out to be the Crank Angle Sensor was fubared.

No Hayes manual.

Balance shaft belt snapped and took out the crank angle sensor.

thanks for the reply.

glad to be of service. Now get your butt to Crappy Tire, spend the 20 bucks and buy a haynes manual. As crappy as they are, they do come in handy sometimes.