Everything is there.
Engine runs (280,000km), auto trans (works fine).
Body is pretty much toast as are the brakes from sitting.
Car has been parked since last year but drove it to where it's now sitting. Started it last week it ran for about 10 minutes.

tinted rear window visor
3 piece aftermarket spolier
adjustable RX7 style spolier
4 piece polyurethane body kit *(rivet or two sided tape install)
sub box (empty)
good interior (non smokers)
several extra parts as well like ALT, intake, valve covers, T belt pullies and tensioner off new/used JDM.

Make an offer, what does not sell goes to the scrap yard.
Email for pics

The sub box is ported and holds 2 10" subs
I have the specs on the box somewhere, but it was built to Pioneer specs. First perfectly in the FWD cars and allows the rear cover to be used for a steath look.

The body kit is a flexable urethane kit that needs to be sanded and painted. It was riveted on but can be installed using 2 sided tape or windshield urethane adheasive, then just fill the rivet holes and paint.

The large rear wing/spoiler is made of fiberglass/resin and is adjustable.

The window visor is not attached just sitting there for a pic.
It's held on with 2 sided tape

The rear spoiler in these pics is also not attched to the car They can be attached with 2 sides tape or windshield urethane adhesive.

Visor
3 piece spoiler
Sold

great seller!
i pm'd you yet again!

what do you want for just the front piece of the kit?

I don't really have any idea what something like this sells for or what it's worth.

Make an offer.

Shipping migh cost a fortune for a huge/heavy item like this though...


It was cracked and repaired on the right corner using special urethane epoxy and seems to of held up fine, but the old paint sill needs to be sanded, primed and repainted.
An hour or so of sanding and bit of epoxy in the drilled rivet holes will put it back into great shape again ready for paint.

If you want better pics of the reapied area or whatever let me know.