Ok so the drivers side works perfect, and the passenger side used to work, then one day it stoped working. I first tried a new switch, and that didn't work, so I replaced the motor, still nothing.

But if I jump the wires at the door right after the swtich it works no problem... I've tried 3 switches now and still nothing, what the hell is wrong with it, could it be the relay?

Have you checked the passenger window lock out switch on the drivers side? It maybe stuck or broken.

my parts car had it hooked up directly to the battery, maybe something to think about..

The lock out switch works because when I push it and then try to jump the wires it no longer works. I just want it to work like it did lol... normally.

The wire going from the driver side to the passenger side is probably broken along the path.

#1- Jump the wires for the passenger door at the drivers door.

#2- If the window does not work,you have a broken wire along the path. Easiest way to resolve it, run new wires eliminating the old ones. If the window works, one of two things is happening...

1- You had a bum 2nd switch and/or motor...it happens.
2- The driver side window switch is done...replace it and re-test.

Hope this helps out. Let me know!