Torque arp head bolts
#309657
July 31, 2009 09:25 pm UTC
July 31, 2009 09:25 pm UTC
|
Joined: Jan 2009
Posts: 56
belleville,Canada
Jeremy Davis
OP
Regular Member
|
OP
Regular Member
Joined: Jan 2009
Posts: 56
belleville,Canada
|
OK so the time has come to get everything done and together.... just wondering if anyone knows what the head studs have to be torque to.. (95 tsi) and what sequence they have to be done in... thanks
1995 TSI AWD TURBO
|
|
|
Re: Torque arp head bolts
[Re: Jeremy Davis]
#309662
July 31, 2009 09:52 pm UTC
July 31, 2009 09:52 pm UTC
|
Joined: Jan 2000
Posts: 7,503
Trenton, On, Canada.
Ghislain Goudreau
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Jan 2000
Posts: 7,503
Trenton, On, Canada.
|
Hello.
Should be along this way. I personaly torque the ARP Studs to 95ft/lbs but that is alittle extreame to some.
Also it would be good if you would chase the treads with a Tap (do not forget to blow the sh!t outta that holes), Use the Moly Lube that comes with the Stud kit, screw in the Studs hand tight and back them about 1/16 of a turn.
I also torque the Nut in 3 steps rather that dialing 96ft/lbs at once. I first use a value like 50ft/lbs, then 80ft/lbs to finish with my last torque value of 95 beautifull ft/lbs.
Again, use the Lube and do not jerk on the Torque Wrench. You'll then be good for miles and miles.
9 3 1 5 7
8 6 2 4 10
Ghislain.
Rouge!!!
|
|
|
Re: Torque arp head bolts
[Re: Tim Grechin]
#309730
August 02, 2009 01:32 am UTC
August 02, 2009 01:32 am UTC
|
Joined: Jan 2000
Posts: 7,503
Trenton, On, Canada.
Ghislain Goudreau
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Jan 2000
Posts: 7,503
Trenton, On, Canada.
|
With moly lube, I torque mine to 85ft-lbs. 40psi of boost and no head lifting. Tha'smy boy!!! GizThaWiz!!!
Rouge!!!
|
|
|
|
|
