2g carbon fiber hatch - GI
#324904
February 23, 2010 07:21 pm UTC
February 23, 2010 07:21 pm UTC
|
Joined: May 2003
Posts: 7,263 Niagara Falls, Ontario
Ziggy Dietrich
OP
Senior Member, with Far TOO Much Time on Their Hands
|
OP
Senior Member, with Far TOO Much Time on Their Hands
Joined: May 2003
Posts: 7,263
Niagara Falls, Ontario
|
I know this topic comes up every once in a while, and never seems to go anywhere.
Right now I have a Quebec customer interested in one, and those guys are pretty serious. I am guessing he is going to go ahead unless pricing ends up HORRIBLE. He is also looking for the lexan rear glass for it.
Anyways, I am negotiating with a place in California that makes them. Of course, the more I order, the more reasonable they become, so I thought I would post here and see if there is any interest. There is quite a lead time in their production, but I want to make the DECISION on this relatively quickly.
I don't have pricing or shipping cost yet, and I think that will depend LARGELY on how many....so if you are SERIOUSLY interested, add your name to the list...
1. 2. 3.
"bluebird" worlds fastest scooter ridden by me "Whitebird" RIP
|
|
|
Re: 2g carbon fiber hatch - GI
[Re: Jeff Mitchell]
#324911
February 23, 2010 08:18 pm UTC
February 23, 2010 08:18 pm UTC
|
Joined: May 2003
Posts: 7,263 Niagara Falls, Ontario
Ziggy Dietrich
OP
Senior Member, with Far TOO Much Time on Their Hands
|
OP
Senior Member, with Far TOO Much Time on Their Hands
Joined: May 2003
Posts: 7,263
Niagara Falls, Ontario
|
I think Reza dealt with CF Tech....and I deal with him regularly and have spoken with him often...
He wanted TEN people before he would make the mold, or FIVE people if I pay for the mold separately.
The place I am talking to now is called GT Fabrications.
I dont see the 2g hatch on his site, but apparently he makes them. He has a 1g hatch for around 330USD I think it was, and hoods for around 380USD, so I would say his pricing is probably in line with anyone else's or maybe better. Problem, of course, is he charges $150.USD to ship a hatch from California to New York. That is why I figure to make it feasible, need to bring several in at once...
I have NO idea how much the lexan window is going to add....I just began discussions with him (and all by email).
Pricing depends on quantity, quantity depends on pricing....need to start SOMEWHERE...so that is why this gauging interest thread.
Those "ballpark" numbers should be sufficient to determine if you are interested or not at a price in that area...
Ziggy
"bluebird" worlds fastest scooter ridden by me "Whitebird" RIP
|
|
|
Re: 2g carbon fiber hatch - GI
[Re: Ziggy Dietrich]
#324995
February 25, 2010 12:56 am UTC
February 25, 2010 12:56 am UTC
|
Joined: May 2003
Posts: 7,263 Niagara Falls, Ontario
Ziggy Dietrich
OP
Senior Member, with Far TOO Much Time on Their Hands
|
OP
Senior Member, with Far TOO Much Time on Their Hands
Joined: May 2003
Posts: 7,263
Niagara Falls, Ontario
|
I was sent this by someone on the board (thanks Brian)
"Currently, Gt fabrications makes a Carbon Fiber rear hatch for the 1g dsmers. Its made of real carbon fiber and weighs in w/o glass in at 7.5 lbs. The hatch with lexan glass weighs in at approx 10-15lbs (depending on Thickness of glass). Factory hatch with glass weighs over 45lbs."
Those numbers are for 1g, but they should give you a rough idea of the kind of weight savings this brings...
"bluebird" worlds fastest scooter ridden by me "Whitebird" RIP
|
|
|
Re: 2g carbon fiber hatch - GI
[Re: Ziggy Dietrich]
#324996
February 25, 2010 01:01 am UTC
February 25, 2010 01:01 am UTC
|
Joined: Oct 2005
Posts: 10,749 Belleville, Ontario
Ryan Laliberte
No-Lift-To-Shift.... Stock. :)
|
No-Lift-To-Shift.... Stock. :)
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2005
Posts: 10,749
Belleville, Ontario
|
Here's a fun thing to do when you get your new hatch.
Throw some new hatch struts in. When someone walks behind your car, pull that little lever to your left beside your seat.
1 point if you scare them 10 points if you hit them
AWDAuto 1996 TSi AWD Automagic12.24 @ 113 - Small 16G FP Green HTA - 11.42/123 Team Pump Gas and Meth RTMRacing - Your Canadian source for DSM Parts "Every moment you live is pregnant with the next moment of your life" --Jim CarreyLast Login: September 28, 2021
|
|
|
Re: 2g carbon fiber hatch - GI
[Re: Jamie Valcamp]
#325118
February 27, 2010 01:04 am UTC
February 27, 2010 01:04 am UTC
|
Joined: Feb 2003
Posts: 628 Kingston, Ont
Steve White
Serious Member
|
Serious Member
Joined: Feb 2003
Posts: 628
Kingston, Ont
|
I am interested ..... but of course I need to know cost and see some pics.
97 Talon with FP 3065-Kelfords-1G race head-DV/DT FMIC-FP 1150's-ECMlink-Meth inj 70/30 at 850cc's
|
|
|
Re: 2g carbon fiber hatch - GI
[Re: Steve White]
#325122
February 27, 2010 01:48 am UTC
February 27, 2010 01:48 am UTC
|
Joined: May 2003
Posts: 7,263 Niagara Falls, Ontario
Ziggy Dietrich
OP
Senior Member, with Far TOO Much Time on Their Hands
|
OP
Senior Member, with Far TOO Much Time on Their Hands
Joined: May 2003
Posts: 7,263
Niagara Falls, Ontario
|
Everyone says his products are good, but I have to say his communication sucks. Every time I call him he tells me he will put it in an email, and then never does.
My Quebec customer who started all this is in a bit of a hurry, but GT Fabrications tells me it is 4-5 weeks lead time to get them made...
so, once I have pricing, I will talk to my quebec customer, but then I plan to place the order within a couple days of getting that info.
So, if you want to see pics or look into quality, I suggest you do your homework NOW.
Like I said, once the price is posted, if you are not ready to commit almost immediately, it won't happen for you.
"bluebird" worlds fastest scooter ridden by me "Whitebird" RIP
|
|
|
Re: 2g carbon fiber hatch - GI
[Re: Jimmy Briand]
#325139
February 27, 2010 07:58 pm UTC
February 27, 2010 07:58 pm UTC
|
Joined: May 2003
Posts: 7,263 Niagara Falls, Ontario
Ziggy Dietrich
OP
Senior Member, with Far TOO Much Time on Their Hands
|
OP
Senior Member, with Far TOO Much Time on Their Hands
Joined: May 2003
Posts: 7,263
Niagara Falls, Ontario
|
jimmy, so far you would be the third person from Quebec, but I am not sure how far apart you all are.
1. Alexandre Corriveau, Sherbrooke 2. Pierre-Louis Boisvert, ?????? 3. Jimmy Briand, Montreal
Someone also suggested that if the lexan window is tinted right after installation, this helps prevent the yellowing,,,
"bluebird" worlds fastest scooter ridden by me "Whitebird" RIP
|
|
|
Re: 2g carbon fiber hatch - GI
[Re: Ziggy Dietrich]
#325245
March 02, 2010 01:08 am UTC
March 02, 2010 01:08 am UTC
|
Joined: Aug 2007
Posts: 3 Montreal
Jimmy Briand
Newbie on Probation
|
Newbie on Probation
Joined: Aug 2007
Posts: 3
Montreal
|
jimmy, so far you would be the third person from Quebec, but I am not sure how far apart you all are.
1. Alexandre Corriveau, Sherbrooke 2. Pierre-Louis Boisvert, ?????? 3. Jimmy Briand, Montreal
Someone also suggested that if the lexan window is tinted right after installation, this helps prevent the yellowing,,, No worries Ziggy. We all know each others inside the DSM Quebec community. You only care about the shipping to one place and we take it from there.
|
|
|
Re: 2g carbon fiber hatch - GI
[Re: Jimmy Briand]
#325269
March 02, 2010 11:49 am UTC
March 02, 2010 11:49 am UTC
|
Joined: May 2003
Posts: 7,263 Niagara Falls, Ontario
Ziggy Dietrich
OP
Senior Member, with Far TOO Much Time on Their Hands
|
OP
Senior Member, with Far TOO Much Time on Their Hands
Joined: May 2003
Posts: 7,263
Niagara Falls, Ontario
|
Ok, I don't know what to say here. The guy at GT Fabrications has promised me THREE TIMES to have a price to me by end of day, and each time has let me down. This is NOT the type of place i want to deal with, I dislike LIARS. I know the local guy I have spoken to before, and he wants to do at least 10, which we wont get.
Before I give up on this, does anyone else know of someone that makes a hatch for the 2g that is not way over-priced?
"bluebird" worlds fastest scooter ridden by me "Whitebird" RIP
|
|
|
Re: 2g carbon fiber hatch - GI
[Re: Anthony Hiscock]
#325507
March 04, 2010 03:01 pm UTC
March 04, 2010 03:01 pm UTC
|
Joined: May 2003
Posts: 7,263 Niagara Falls, Ontario
Ziggy Dietrich
OP
Senior Member, with Far TOO Much Time on Their Hands
|
OP
Senior Member, with Far TOO Much Time on Their Hands
Joined: May 2003
Posts: 7,263
Niagara Falls, Ontario
|
Ok, I talked to James at squid skins. He was not thrilled about doing hatches in carbon fiber. He was quite interested in doing them in fiberglass. He tells me the weight difference is only a pound or two.
The carbon fiber hatch from him would be over $700., and that is without any glass.
The fiberglass hatch would be $415. he says it is "unfinished" looking on the inside. It uses the stock hinges and latch assembly, but does NOT accept the stock hatch supports..you would need to come up with a prop rod of your own.
So far it is three quebec guys who are interested, so if you are all interested in the fiberglass, I could look into the cost of having them shipped. I could also still look into the cost of lexan windows for them, but if there is no serious interest, there is not much point...
Let me know guys..
"bluebird" worlds fastest scooter ridden by me "Whitebird" RIP
|
|
|
Re: 2g carbon fiber hatch - GI
[Re: Ziggy Dietrich]
#325555
March 05, 2010 02:51 pm UTC
March 05, 2010 02:51 pm UTC
|
Joined: May 2003
Posts: 7,263 Niagara Falls, Ontario
Ziggy Dietrich
OP
Senior Member, with Far TOO Much Time on Their Hands
|
OP
Senior Member, with Far TOO Much Time on Their Hands
Joined: May 2003
Posts: 7,263
Niagara Falls, Ontario
|
Ok, the Quebec guys have all expressed that they are NOT interested in Fiberglass, the local guy Reza used is NOT interested in doing them, and GT Fabrications is not even willing to give me pricing...I have NO desire to deal with those guys, so I am considering this dead (once again), unless someone knows of anyone else making 2g hatches in Carbon Fibre at a reasonable price??
"bluebird" worlds fastest scooter ridden by me "Whitebird" RIP
|
|
|
Re: 2g carbon fiber hatch - GI
[Re: Ziggy Dietrich]
#327305
March 30, 2010 10:35 am UTC
March 30, 2010 10:35 am UTC
|
Joined: May 2003
Posts: 7,263 Niagara Falls, Ontario
Ziggy Dietrich
OP
Senior Member, with Far TOO Much Time on Their Hands
|
OP
Senior Member, with Far TOO Much Time on Their Hands
Joined: May 2003
Posts: 7,263
Niagara Falls, Ontario
|
Ok, going to resurrect this. I have been in touch with another relatively local (Southwestern Ontario) guy, who would be willing to make these in smaller quantities. I am going to be contacting the Quebec guys again. Group buy price will be in around the $575. mark, and I will need a GOOD condition hatch (with glass and hardware removed) for the mould.
So, now I am looking BOTH to gauge interest and get a more accurate count, AND for a "donor" hatch.
"bluebird" worlds fastest scooter ridden by me "Whitebird" RIP
|
|
|
|
|