My 2nd retro, my first one turned out like crap so I started this one with a pair of Ebay 2Gb Halo Lights (I took the halos out). I've been working on these for a while now and hope to have them on the car next week for the driving across the country.
Allow me to bring you up to speed.

Specs:
4 FX-R Projectors (2 per side)
50W ballasts (for the inners)
Bosch AL Gen 2 Ballasts (for the outters) which are boostable to 80W via a cabin mounted pot
Inners run Phillips 85122+ Bulbs
Outters run Morimoto 5000K bulbs

The lights themselves.


I picked up some 1x1 aluminum tube to build myself a jig to mount the lights too for bench aiming. Cut the tube in half and drilled some holes. No pictures of the jig in action though because I was on my phone. Basically I leveled the whole housing and marked the cut off on my balcony wall.


I removed all the factory hardware from the housings, drilled and taped my FX-Rs to accept 1/4-20 bolts, drilled some holes and....



Mounted on the jig (inner is off rotation here but has been fixed now).



All aimed!