Re: Welding/Fabrication shop/Like us on facebook
[Re: Jaden Cubberley]
#391224
December 28, 2012 03:11 am UTC
December 28, 2012 03:11 am UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
Catch cans and overflows are popular.
I would be interested in an overflow for a 1g.
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Welding/Fabrication shop/Like us on facebook
[Re: Jaden Cubberley]
#391239
December 28, 2012 03:17 pm UTC
December 28, 2012 03:17 pm UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
Well for the catch cans most people are running off both vents so you would need two inputs.
As for the coolant overflow, if it mounting bracket was to the stock BOV location that would be perfect, or right behind the rad if you need more clearance.
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Welding/Fabrication shop/Like us on facebook
[Re: Jaden Cubberley]
#391245
December 28, 2012 04:40 pm UTC
December 28, 2012 04:40 pm UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
Just like this: Here is the guys website if you want more pictures. You can see the mounting bracket on the third picture.
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Welding/Fabrication shop/Like us on facebook
[Re: Jaden Cubberley]
#391248
December 28, 2012 07:32 pm UTC
December 28, 2012 07:32 pm UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
Well I would be in at that price. I don't really care what type of cap just as long as it's screw top.
Also wondering if you would be interested in making me a fuel cell. I would need it to use the original mounting points and would want it to have studs so I can put in the original sending unit.
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Welding/Fabrication shop/Like us on facebook
[Re: Jaden Cubberley]
#391250
December 28, 2012 08:44 pm UTC
December 28, 2012 08:44 pm UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
Haha, ok just trying to keep ya busy
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Welding/Fabrication shop/Like us on facebook
[Re: Jaden Cubberley]
#391260
December 28, 2012 11:38 pm UTC
December 28, 2012 11:38 pm UTC
|
Joined: May 2010
Posts: 1,106 Saskatoon, Saskatchewan
Andrew Trapp
Serious Member
|
Serious Member
Joined: May 2010
Posts: 1,106
Saskatoon, Saskatchewan
|
The coolant res from Frontline for the 2g goes where the stock fusebox is. To use it, you need to relocate your stock fusebox. Unfortunately, I don't have any pictures.
The catch can from Frontline, at least for the 2g, mounts above the battery and requires a battery relocation to use.
edit: Not trying to speak for Ziggy, but you might want to get in touch with Ziggy to see if he would be able to supply you with a cap, either by sourcing or fabrication.
Last edited by Andrew Trapp; December 28, 2012 11:40 pm UTC.
|
|
|
Re: Welding/Fabrication shop/Like us on facebook
[Re: Jaden Cubberley]
#391266
December 29, 2012 01:57 pm UTC
December 29, 2012 01:57 pm UTC
|
Joined: May 2003
Posts: 7,263 Niagara Falls, Ontario
Ziggy Dietrich
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: May 2003
Posts: 7,263
Niagara Falls, Ontario
|
I've had a quick look, and only thing I could find decently priced is the Jegs cap and bung. It has the Jegs logo, which I am not sure people would want, and I don't have an account with Jegs. I can get others, but not really cheap.
I DO have a chinese "oil catch tank" that comes with a cap for some reason (no idea why), maybe that could be converted somehow??
"bluebird" worlds fastest scooter ridden by me "Whitebird" RIP
|
|
|
Re: Welding/Fabrication shop/Like us on facebook
[Re: Andrew Trapp]
#391273
December 29, 2012 03:53 pm UTC
December 29, 2012 03:53 pm UTC
|
Joined: Apr 2010
Posts: 6,809 Ottawa, ON
Mike Eng
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Apr 2010
Posts: 6,809
Ottawa, ON
|
The catch can from Frontline, at least for the 2g, mounts above the battery and requires a battery relocation to use. I plan to mount the FF catch can where the cruise control would be, but transverse, or perpendicular to the battery. And using two 90* fittings to -10an braided lines to the valve cover. I didn't think the catch can comes with any type of mounting bracket. If it does, that's not good! I'd need to cut and grind them off so I could customize one for my application.
'99 GSX GT35R '03 CBR 600RR
|
|
|
Re: Welding/Fabrication shop/Like us on facebook
[Re: Mike Eng]
#391303
December 30, 2012 06:35 am UTC
December 30, 2012 06:35 am UTC
|
Joined: May 2010
Posts: 1,106 Saskatoon, Saskatchewan
Andrew Trapp
Serious Member
|
Serious Member
Joined: May 2010
Posts: 1,106
Saskatoon, Saskatchewan
|
The catch can from Frontline, at least for the 2g, mounts above the battery and requires a battery relocation to use. I plan to mount the FF catch can where the cruise control would be, but transverse, or perpendicular to the battery. And using two 90* fittings to -10an braided lines to the valve cover. I didn't think the catch can comes with any type of mounting bracket. If it does, that's not good! I'd need to cut and grind them off so I could customize one for my application. I'm not a 100% sure how it works out, but the description is "This guy is 100% bolt-in as long as your battery is relocated."
|
|
|
Re: Welding/Fabrication shop/Like us on facebook
[Re: Jaden Cubberley]
#391305
December 30, 2012 06:58 am UTC
December 30, 2012 06:58 am UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
I am liking it so far, I would definitely be interested in keeping the indicator cause it's always nice to know exactly how much is in there.
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Welding/Fabrication shop/Like us on facebook
[Re: Jaden Cubberley]
#391470
January 03, 2013 02:05 pm UTC
January 03, 2013 02:05 pm UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
Damn I was doing really good at keeping colour out of my engine bay, can i get black?
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Welding/Fabrication shop/Like us on facebook
[Re: Jaden Cubberley]
#391478
January 03, 2013 03:23 pm UTC
January 03, 2013 03:23 pm UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
I seem to be one of the select few that want's neither blue or red, I have been slowly taking all the flash out of my bay.
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Welding/Fabrication shop/Like us on facebook
[Re: Jaden Cubberley]
#391548
January 04, 2013 05:24 am UTC
January 04, 2013 05:24 am UTC
|
Joined: Apr 2010
Posts: 6,809 Ottawa, ON
Mike Eng
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Apr 2010
Posts: 6,809
Ottawa, ON
|
I hear ya Bryan, I was considering it myself but too late..dsm's are meant to be looked at, especially under the hood
'99 GSX GT35R '03 CBR 600RR
|
|
|
Re: Welding/Fabrication shop/Like us on facebook
[Re: Jaden Cubberley]
#391555
January 04, 2013 12:53 pm UTC
January 04, 2013 12:53 pm UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
Well polished aluminum and wrinkle black is damn nice to look at, don't you think!?
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Welding/Fabrication shop/Like us on facebook
[Re: Jaden Cubberley]
#391580
January 04, 2013 06:46 pm UTC
January 04, 2013 06:46 pm UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
YAY!!! So when do we get to see pictures of your work and how it mounts?
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Welding/Fabrication shop/Like us on facebook
[Re: Mike Eng]
#391595
January 04, 2013 08:36 pm UTC
January 04, 2013 08:36 pm UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
Gotta be a fuel cell Hope so!! :-D
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Welding/Fabrication shop/Like us on facebook
[Re: Jaden Cubberley]
#391676
January 06, 2013 03:19 am UTC
January 06, 2013 03:19 am UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
Take my money!! But seriously, when can I get one?
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
|
|