92 Talon Part out
#416809
October 29, 2013 12:17 am UTC
October 29, 2013 12:17 am UTC
|
Joined: Jul 2010
Posts: 44 Simcoe, Ontario
Steve Goodlet
OP
Newbie on Probation
|
OP
Newbie on Probation
Joined: Jul 2010
Posts: 44
Simcoe, Ontario
|
all prices are firm and are picked up only.
-6 bolt 4G63 turbo $500 Balance shaft delete kit with mirage stub shaft new top line oil pump housing 2nd gen 8.5-1 pistons on 1st gen rods Clevite Race bearings
-1G 6 bolt head $500 OEM valvetrain HKS 272 cams ($400 seperate) Port matched exhaust ports ported oil path in block through cylinder head to compensate for larger head studs blocking oil path to head
-6 bolt arp head studs $80
-6 bolt stock head studs $40
-7 bolt head (head valves and springs unmolested) $150
-7 bolt block crank and flywheel (not walked or blown) $100
-2 side and front Prothane Polyurethane engine mount bushings, rear is stock $60
-Transmission $1500 Forcepower Stage 3 gear box Welded Center Diff+ VC eliminated Chromoly shift forks DSM gear set
-front 3 cv shafts 150
-Stock T-case $100
-Rebuilt prop shaft $200
-Competition Clutch stage 4 sprung clutch and 2700 pressure plate $180
-Competition Clutch light weight flywheel $180
-Stock 4 bolt rear shafts cups and pumpkin $350 (add another $200 subframe with adjustable toe)
-Eibach Sport line springs on struts $150(front) -Tein lowering springs $150 (rear)
-Megan Racing Front/rear strut tower bars $100 (both)
-Energy suspension swaybar bushings front and rear $30
-PTE 680cc injectors $120
-Aeromotive fuel pressure regulator with -8an fuel line from fuel Rail to fpr $100
-Walbro 255 intank fuel pump $40
-dual 10" derale slim electric pull/pull fan (set up pushing and brand new) on Stock radiator $250
-blown TD05h 20G 3"compressor cover on 1g manifold (new turbine shaft needs bearings) $150
-stock 14b converted to downfiring $400 turbine housing welded shut and smoothed off and ported Ported O2 housing
-PTP Subaru Turbo blanket $65
-2.5” intercooler piping long route $500 Custom intercooler W/ CAST endtanks rated 650hp Turbosmart Race port blow off valve (ver 1) GM AIT
-6 bolt stock intake manifold $30
-ForcePower Motorsports "Prototypes" Race Sheet Metal Intake Manifold polished ( works amazing) $700 Rebuilt stock 60mm throttle body p2r phenolic gaskets (both tb sides and im)
-Custom Valve cover shaved polished with -12an Vent $150
-3” intake pipe with -12 fitting w 3" silicone and 3"-2 1/4"adapter $80
-DNP DSM equal length Tubular Exhaust manifold W/ 40mm wastegate flange and adapter (wrapped with DEI Titanium exhaust wrap twice) $600 Tial 38 Wastegate ( double springed blue for 24 psi)
- Full 3” Stainless Steel Exhaust , exhaust wrapped with DEI Titanium exhaust wrap from 02 to the cat $450 3" flex pipe 3” catiyltic converter 3” X 14” Vibrant stainless resonator 3” in 4” out Vibrant SS muffler
-AEM EMS V.1 $700 Master power 4-bar Map
-1g coils $30
-1g igniter $60
-1g MPI $40
-AEM Digital Wideband Sensor + gauge $140
-Stuart Warner electric Oil pressure gauge $30
-Stuart Warner Fuel pressure gauge $30
-Stuart Warner mechanical Boost Gauge -30hg to 40psi $40
-AEM Water/Methanol Injection kit w/1 Gallon tank $300
tsi awd Exterior/Shell $400 190,000km, , -stock 16” 92 tsi awd rims (Fusion ZRI tires less than 10,000km 225/50/16) $400
-new magnacore thundervolt wires $80
-2g MAF $80
-stock 1gb head lights + markers$80
-clear and blacked 1gb lights(led bulbs) + markers $200
-1Gb Taillights $150
-Shifter base and solid bushings with cables $120
-complete power doors ding free mint hinges $200 per side
-fenders $80 per side -hatch with shocks and latch with full stock wing $450
-hood gutted vented and pinned with pins $100
-wiper motor assembly $60
-cowl cover black $60
-front subframe with rack and sway bar $200
-rear subframe with sway bar $200
-front cross bar north south bars $75
-all 4 brake calipers $120
-leather interior (front and rear seats) $250
-black carpet $60
-center console with gauge hole $50
-steering colum with grant hub $400
-front bumper $60
-rear bumper $60
-rear reinforcement bar $40
-all seatbelts $200
-dash ( + boulster and glovebox)$150
-Wiring harness $100
|
|
|
Re: 92 Talon Part out
[Re: Steve Goodlet]
#416810
October 29, 2013 12:22 am UTC
October 29, 2013 12:22 am UTC
|
Joined: Jan 2000
Posts: 7,503 Trenton, On, Canada.
Ghislain Goudreau
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Jan 2000
Posts: 7,503
Trenton, On, Canada.
|
Forcepower Stage 3 gear box eh???
Ghislain
Rouge!!!
|
|
|
Re: 92 Talon Part out
[Re: Steve Goodlet]
#418274
November 23, 2013 08:42 pm UTC
November 23, 2013 08:42 pm UTC
|
Joined: Jul 2010
Posts: 44 Simcoe, Ontario
Steve Goodlet
OP
Newbie on Probation
|
OP
Newbie on Probation
Joined: Jul 2010
Posts: 44
Simcoe, Ontario
|
update and edit***
all prices are firm and are picked up only.
-6 bolt 4G63 turbo $300 Balance shaft delete kit with mirage stub shaft new top line oil pump housing 2nd gen 8.5-1 pistons on 1st gen rods Clevite Race bearings
-1G 6 bolt head $400 OEM valvetrain Port matched exhaust ports ported oil path in block through cylinder head to compensate for larger head studs blocking oil path to head
- HKS 272 cams $400 (pending)
-6 bolt arp head studs $80
-6 bolt stock head studs $40
-7 bolt head (head valves and springs unmolested) $150
-7 bolt block crank and flywheel (not walked or blown) $50
-2 side and front Prothane Polyurethane engine mount bushings, rear is stock $60
-Transmission $1300 Forcepower Stage 3 gear box Welded Center Diff+ VC eliminated Chromoly shift forks DSM gear set
-front 3 cv shafts 150
-Stock T-case $100
-Rebuilt prop shaft $200
-Competition Clutch stage 4 sprung clutch and 2700 pressure plate $180
-Competition Clutch light weight flywheel $180
-Stock 4 bolt rear shafts cups and pumpkin $350 (add another $200 subframe with adjustable toe)
-Eibach Sport line springs on struts $150(front) -Tein lowering springs $150 (rear)
-Megan Racing Front/rear strut tower bars both SOLD
-Energy suspension swaybar bushings front and rear $30
-PTE 680cc injectors SOLD
-Aeromotive fuel pressure regulator with -8an fuel line from fuel Rail to fpr $100 pending
-Walbro 255 intank fuel pump $40 pending
-dual 10" derale slim electric pull/pull fan (set up pushing and brand new) on Stock radiator $250
-blown TD05h 20G 3"compressor cover on 1g manifold (new turbine shaft needs bearings) $100
-stock 14b converted to downfiring $350 turbine housing welded shut and smoothed off and ported Ported O2 housing
-PTP Subaru Turbo blanket $65
-2.5” intercooler piping long route $500 Custom intercooler W/ CAST endtanks rated 650hp Turbosmart Race port blow off valve (ver 1)
-dsm link sd bundle (gm ait, 4bar map, sd cable for 2g maf plug, bung on tb elbow) $130
-6 bolt stock intake manifold $20
-ForcePower Motorsports "Prototypes" Race Sheet Metal Intake Manifold polished ( works amazing) $700 Rebuilt stock 60mm throttle body p2r phenolic gaskets (both tb sides and im)
-Custom Valve cover shaved polished with -12an Vent $100
-3” intake pipe with -12 fitting w 3" silicone and 3"-2 1/4"adapter $80
-DNP DSM equal length Tubular Exhaust manifold W/ 40mm wastegate flange and adapter (wrapped with DEI Titanium exhaust wrap twice) $600 Tial 38 Wastegate ( double springed blue for 24 psi)
- Full 3” Stainless Steel Exhaust , exhaust wrapped with DEI Titanium exhaust wrap from 02 to the cat $350 3" flex pipe 3” catiyltic converter 3” X 14” Vibrant stainless resonator 3” in 4” out Vibrant SS muffler
-AEM EMS V.1 $650
-1g coils $30
-1g igniter $60
-1g MPI $40
-AEM Digital Wideband Sensor + gauge $140
-Stuart Warner electric Oil pressure gauge $30
-Stuart Warner Fuel pressure gauge $30
-Stuart Warner mechanical Boost Gauge -30hg to 40psi $40
-AEM Water/Methanol Injection kit w/1 Gallon tank $300
tsi awd Exterior/Shell $400 190,000km, , -stock 16” 92 tsi awd rims (Fusion ZRI tires less than 10,000km 225/50/16) $350
-new magnacore thundervolt wires $80
-2g MAF $80
-stock 1gb head lights + markers$80
-clear and blacked 1gb lights(led bulbs) + markers $200
-1Gb Taillights $150
-Shifter base and solid bushings with cables $120
-complete power doors ding free mint hinges $200 per side
-fenders $80 per side
-hatch with shocks and latch with full stock wing $450
-hood gutted vented and pinned with pins $100
-wiper motor assembly $60
-cowl cover black $60
-front subframe with rack and sway bar $200
-rear subframe with sway bar $200
-front cross bar north south bars $75
-all 4 brake calipers $120
-leather interior (front and rear seats) $250
-black carpet $60
-center console with gauge hole $50
-steering colum with grant hub $400
-front bumper $60
-rear bumper $60
-all seatbelts $200
-dash ( + boulster and glovebox)$150
-Wiring harness $100
|
|
|
Re: 92 Talon Part out
[Re: Steve Goodlet]
#418312
November 24, 2013 06:23 am UTC
November 24, 2013 06:23 am UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
Steve you think you could get some pictures up?
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: 92 Talon Part out
[Re: Steve Goodlet]
#418475
November 27, 2013 03:15 am UTC
November 27, 2013 03:15 am UTC
|
Joined: May 2000
Posts: 2,637 NiagaraFalls, ON
Paul Bratina
Insane Member
|
Insane Member
Joined: May 2000
Posts: 2,637
NiagaraFalls, ON
|
Unless we end up making the trip for our own devious reasons, any trip on behalf of others is going to have to be financed by all the "others" and if that group is small, well, I think you get the idea.
And I have to say, looking down that list, nothing really jumps out at me. But give me some time to mull it over.
|
|
|
Re: 92 Talon Part out
[Re: Steve Goodlet]
#418553
November 28, 2013 03:11 am UTC
November 28, 2013 03:11 am UTC
|
Joined: May 2010
Posts: 1,106 Saskatoon, Saskatchewan
Andrew Trapp
Serious Member
|
Serious Member
Joined: May 2010
Posts: 1,106
Saskatoon, Saskatchewan
|
Yeah, that is what I figured. If it is an option, it is an option, if not then oh well. We'll keep in touch via email, I have a query into Ziggy regarding a 1g AWD exhaust at the moment.
|
|
|
|
|