We have done no tuning. Base idle was sorta done again tonight after we tried to do it with a MAF that failed as we were tuning.

We have a freshly built engine with a brand new high flow cat near the end of the pipe. We will use some 87 as the tank is empty as it is.

I have currently set it to an idle of 1000 and pulled -4 degrees if rom 0-3000 and -4.7 from 50hrz and graded it up to 0 at about 200 hrz.

This will be the first time we have plated and done a drive clean on this car.

D.