I am kinda needing to know this, my auto tranny is acting up (only upshifts at 3500 RPM, hard shifts too) an i was gonna do a Mt swap anyway, i found a decent turbo 5 speed from a 90, is there anything different about that year? when comparing to a 91-94?
Thanks

I believe since you are swapping every component from the '90, it will be plug and play.

There usually is a difference with the shifter arms (you would use your '93 shifter arms on the tranny), but since I assume you'll be taking the shifter itself from the '90 that shouldn't matter as they will match.

Oh and in case you don't have it already, here is a link with possibly all the info you'll need:

http://www.ecanfix.com/~mdhamilton/autotomanual.html

I have looked at this thread: http://www.dsmtuner.com/forums/showthread.php?t=93739&page=3&pp=25&highlight=1990+tranny

and i have a shifter and sifter cables from a 90, so i guess this means it should match up with the 90 trans.

if your car is turbo your axles might be different, I know the Turbo MT axles are different between 90 and 93,

maybe yours aren't

I have a non-turbo car, the tranny i listed is a turbo version.

I believe 90 turbo and 93 NT use the same axles.
I'm not sure if auto makes a difference.

if his 93 is NT it is the same then
regardless of being auto or Manual

Well i went to the place this morning, they want 480$ for the tranny, 90 turbo 5 speed, 177k km.

They gave me a deal, tranny, mounts, 6-bolt flywheel, and axels to fit(just to be sure), and tranny for 650$ tax included.

All i have to buy is new output shaft seals, release bearing, clutch slave, and clutch pp and disk.