All parts are for a 1997 Eagle Talon TSi AWD. If you need to see if they will work for your car, please use CAPS or check the manufacturer's website.

I'm in Kitchener, Ontario and I prefer local pickup or drop off only. If you're out of town but have a buddy in KW who could see the parts for you and take care of shipping and payment, then I'm cool with that.

PMs are best.

Rear brake pads [NEW] - EBC GreenStuff - $70
Note - Use only with EBC GreenStuff front pads! Co-efficient of friction is very high = 0.46


Clutch Disc [NEW] - SBR3500 - $128
This is a Kevlar disc, still in the original 'Ziggy' packaging.



Clutch Release Bearing [NEW] - Mitsubishi OEM - $20


Brake Master Cylinder [Used] - OEM take off - $0 (Free!)
I suspect this m/c is good, but after sitting for a while, it would likely need cleaning inside. I was having a lot of trouble with brakes during autocross and changed this m/c out, but the problem did not go away until I changed the brand of brake pads.



Front Wheel Hub [NEW] - SKF/NAPA - <Price Pending>




Throttle Body Shaft Seals [NEW] - $5


Throttle Body Gaskets [NEW] - $5
[img]http://i950.photobucket.com/albums/ad344/6-Speed-6/ForSale008.jpg[/img]

Rear Brake Discs [Used] - OEM take offs - machined for discs and pads - $30
I used to keep two sets of brake discs and swap them when they needed machining. These are the OEM ones.
[img]http://i950.photobucket.com/albums/ad344/6-Speed-6/ForSale023.jpg[/img]
[img]http://i950.photobucket.com/albums/ad344/6-Speed-6/ForSale024.jpg[/img]

Parking Brake Shoes - [NEW] - Mitsubishi OEM - $45
[img]http://i950.photobucket.com/albums/ad344/6-Speed-6/ForSale011.jpg[/img]

Flywheel [Used] - OEM take off (Needs cleanup and machining) - $5
<Photo Pending>

Anti-roll bars (F&R) [Used] - OEM take off - $5
<Photo Pending>

Compressor Bypass Valve [Used] - OEM take off - $0 (Free!)
<Photo Pending>

Racing Harness, 4 pt [Used] - Sparco - $40
This harness doesn't fit the new car, so it has to go. It could also use a bit of soap and water on the webbing.
[img]http://i950.photobucket.com/albums/ad344/6-Speed-6/ForSale026-1.jpg[/img]

The racing harness is no longer for sale, since I just now found a way to install it in the new car.

Flywheel is gone.

Front Wheel Hub [NEW] - SKF/NAPA - $140