Hey Guys,

I have a bunch of parts I'm getting rid of.

94 Hall Effect CAS - $100
Great for your 6 bolt swap to get rid of those pesky PO300 codes.



EVO 9 Steering wheel modded for a 2g.
This is a BOLT on wheel for a 2g.
This has the working horn and Airbag.

PERFECT BOLT ON. This is a Genuine, MOMO Leather wrapped Steering wheel.
I bought this off a member years ago and it was pretty awesome.

Looking for $400 on this one.





THIS IS WHAT IT LOOKED LIKE ON THE CAR.

THis wheel is a few inches smaller in circumference to the stock wheel and looks and feels amazing. Stock wheel feels like a truck.



2g Eprom ECU
This was sent down to the boys at DSMLINK. They fixed all the traces and Socketed the unit for me.
Will be sold with the stock chip.

I can also offer a package deal with the 2 DSM CHIPS that I have and the corresponding injectors.

I'd really like to keep the chip/injectors together if possible.

Because the ECU has already been socketed, all the traces / capacitors fixed, etc I am looking for $300 on the ECU

The picture has a chip currently installed for a 660cc injectors - available separately.



660cc FIC injectors with all seals, $200
Chip burned for 660's, two step, knock gauge, Inverted CAS, - $50
Valve cover/spark plug cover - VIBRANT $40

Ziggy's Fuel Pressure adapter, $20
Other CHIP burned for 750cc injectors, meth and STOCK eprom CHip



EVO 3 MAF - STOCK 100% working all honey combs in. FLOWS MORE than a 2G maf. Should read OVER 400HP
$100







I also have an UNCUT 98 GST Wiring Harness available, no picture. $120

Convertible Tonnue cover also available. Black - $200
I got this shipped up from Florida years ago.
Cleans up the rear lines a lot.



2g lateral arm - BNIB with ball joint 1- not a pair - $40


T3, dual scroll Truck Turbo.

I bought this, I realize I'm never going to use it.
It a Borg Warner Turbo, Garret housings.
Has a HUGE HOTSIDE. 1.01 A/R

Looking for $300 OBO. THis Turbo is Brand new. Will include the steel 4 bolt flange.

Externally gated, oil only, thrust bearing turbo.

I think the turbine wheel measured 71mm or something crazy like that.

[img]http://img836.imageshack.us/img836/6131/fronti.jpg[/img]

[img]http://img829.imageshack.us/img829/4044/sidec.jpg[/img]

[img]http://img828.imageshack.us/img828/556/twinscroll.jpg[/img]

[img]http://img833.imageshack.us/img833/9383/withflange.jpg[/img]

Pretty bare 2g Throttle body. $30
[img]http://img27.imageshack.us/img27/3225/dsc034718604735.jpg[/img]

[img]http://img23.imageshack.us/img23/5102/dsc034738606869.jpg[/img]

[img]http://img269.imageshack.us/img269/8171/dsc034748608719.jpg[/img]

1g rail is stock. - $20
2g Fuel rail has been polished. $30

[img]http://img29.imageshack.us/img29/3653/dsc034758611294.jpg[/img]

[img]http://img62.imageshack.us/img62/6223/dsc034768615648.jpg[/img]

[img]http://img32.imageshack.us/img32/1797/dsc034778617478.th.jpg[/img]

Polished 2g fuel rail = $20

[img]http://img830.imageshack.us/img830/1465/dscf05907631091.jpg[/img]

Heat Shield for stock exhaust manifold. $20

[img]http://img534.imageshack.us/img534/9929/dscf05917645116.jpg[/img]

Also have some stock 2g cams, free to a good home

RED POWDER COATED VALVE COVER - Polished letters, no baffles. - $60 obo

[img]http://img843.imageshack.us/img843/9599/img00210.jpg[/img]



Feel free to PM or email me at rafaelATonijdmDOTcom

THanks

* Eprom ECU Sold *

If you have any questions, feel free to ask.

Thanks

Please send inquiries to boost.yaw@gmail.com

Feel free to toss out reasonable offers on most of this stuff.

Thanks

Raf

Tonnue cover and 2g cams gone.

MOMO LEATHER EVOLUTION Wheel SOLD

Full 2g Wiring Harness SOLD

94 Hall effect CAS SOLD

Heat Shield SOLD

Turbo - Available
Still 100% Brand new and sitting on my coffee table.

MAF - Available

INJECTORS - Available

I'm in the process of cleaning my garage.

I have a BOX full of DSM MANUALS. Haynes, Chiltons, DSM electrical Manuals, 2g manuals ect.

I'm Also giving away the valve cover as I have no use for it , Same with the fuel rails, TB's etc.

I have it all in a little box so the next person that buys something on my list, can take that as a free bonus.

Cheers

Injectors, MAF and turbo still available.

So, after a member asked me for the injectors, he pulled out and left my litterally holding a box.

I currently have the injectors, chip, fuel rail adapter, random 2g parts and tonnes of manuals in my trunk.

I'm looking to get $150 0B0 for the lot before I put it on ebay, or end up tossing stuff.

If interested, let me know. I'd rather it go to someone in the community that will use it.

Thanks

Raf

I've been going through my stuff, and I found a few more things.

- J pipe for a 14b/16g 2g with a boost nipple.
- 2g REAR Ingalls camber kit
- spare 2g t25
- 2g Manuals. Electrical, master, chilton's, haynes.

Etc.


Again, looking if anyone needs this stuff

Let me know.

THanks

As of right now the following is up for grabs:


- J pipe for a 14b/16g 2g with a boost nipple. OBO

- 2g REAR Ingalls camber kit OBO

- Spare 2g t25 OBO

- 2g Manuals. Electrical, master, chilton's, haynes. $5 each. $40 for the lot

- Turbo - Available
Still 100% Brand new and sitting on my coffee table.

- MAF - Available obo

- 660cc INJECTORS - Available $150 Including Chip

- Valve cover/spark plug cover - VIBRANT $40

- Ziggy's Fuel Pressure adapter, $20

- Coil packs 2g - obo



PM or Email me anytime at boost.yaw@gmail.com

bump

I see that i missed out on that real nice steering wheel. is that wheel available anywhere or was this a limited edition kinda thing?

Injectors w/chip - SOLD
Fuel Pressure adapter - SOLD
Coil Packs - SOLD

Turbo and Jpipe (2g) SOLD

- 2g Manuals. Electrical, master, chilton's, haynes. $5 each. $40 for the lot


- MAF - Available obo

Still have a box of 2g manuals.
If you want them, you can have them.

Everything else has been sold.


call me at 905 999 2820

Thanks

Manuals Gone.

Only 2G/EVO3 MAF left.