Rivets
#363229
October 13, 2011 04:51 pm UTC
October 13, 2011 04:51 pm UTC
|
Joined: May 2010
Posts: 1,106 Saskatoon, Saskatchewan
Andrew Trapp
OP
Serious Member
|
OP
Serious Member
Joined: May 2010
Posts: 1,106
Saskatoon, Saskatchewan
|
I can't seem to find these anywhere online on locally, so I figured I would try here to see if anybody might have a lead on them.
What I need is a: steel 1/4" dia. closed end blind rivet with a 1/2" grip range. All I can find in the 1/4" is either stainless or aluminium, but I need carbon/mild steel. I've tried the typical places: Bolt Supply, Greggs, Acklands, Anchor, etc...
Let me know if you can think of any speciality places that might have these.
|
|
|
Re: Rivets
[Re: Andrew Trapp]
#363259
October 13, 2011 09:44 pm UTC
October 13, 2011 09:44 pm UTC
|
Joined: May 2010
Posts: 1,106 Saskatoon, Saskatchewan
Andrew Trapp
OP
Serious Member
|
OP
Serious Member
Joined: May 2010
Posts: 1,106
Saskatoon, Saskatchewan
|
Found something that will work, Stuart & Wright pointed me towards Lloyd Nut & Bolt which can order in Huck Magna-Lok which is considered to create a sealed connection even though it isn't a close end rivet.
From all my calling around, including Fastenal, 1/4 closed end blind rivets only come in stainless or aluminium.
It is strange, I would consider the Huck a rivet, but apparently, that isn't its generic name, but the only people that were willing to look beyond just exactly what I wanted and to something that might work instead in my situation was Lloyd Nut & Bolt. Kudos Sven!
edit: Barfasco got back to me, and negative as well.
Last edited by Andrew Trapp; October 13, 2011 09:44 pm UTC.
|
|
|
|
|