Alright so, I picked up Lucian's shell and I am now going to list out some parts, hopefully I can find some locally and hopefully the prices aren't too bad.

-6 bolt motor complete, if it has accessories great, if not then not a huge deal, just in good condition with good compression numbers
-5spd transmission with transfer case, would be perfect if it's a combination deal, but if not I will deal with it
-1G Driveshaft, looking for a good condition drive shaft, I have heard I can get rebuilt ones for around $150, but if someone has one used that is in great condition that will work too
-1G Short Route FMIC, preferably with a 1G BOV adapter already welded on the piping. In good condition, doesn't have to be perfect
-1G AWD exhaust. If you have a good condition stock one that's cool, if it's aftermarket that's cool as well, don't need anything special, I've always loved mandrel bent steel ones but let me know what you have
-1G Blow off valve, preferably one unmodified
-14B with exhaust manifold, depending on the motor I pick up, if it is missing the turbo / manifold, I will need these. One with no shaft play, or minimal at most.
- MAF Translator with the proper pig tail, I wont be going DSMLink right away, looking to just do something basic to help with tuning at first
- 2G MAF with 1G plug, if I can't find a MAF-Translator, this will be my next option

That should just about cover everything. If some people can deliver that would be great as my beater car doesn't do well on long ass drives, if you do deliver, I will obviously compensate you for your time

Shoot me some messages on here with what you have. Thank you!

I got a maft for you

You've always come through for me whenever I needed parts, so I really appreciate it dude, I will be in touch for sure! Do you have email money transfer?

Yeah I do.
I can give you my 1g manifold too, just need to put on my evo one

Hi Brandon, I have a complete 6-bolt long block (oil pan complete to valve cover) including all the timing belt parts. It could use a little cleaning up but it's a low mileage stock rebuild with good compression. I can also throw in a 1g or 2g intake manifold, a 2g exhaust manifold. I probably have a 14b and a 2G MAF as well. C-C-C-COMBO!!

Willing to work out a good deal as I really want the engine out of my garage and I'm too lazy to make a proper ad for it.

PM me if you're interested and I'll send some details.

You will also need brakes and lines if you haven't sourced out any. As well as a rad and hoses, heater core hoses, clutch slave and line. Just trying to help with some of the smaller things I can think of.

I still have the rad that I originally had in the car (it's almost new), as well as 2 22 spline transfercases (so if you find a 90 trans these will work) you can have for cheap, if needed. I also have a brand new OEM master cylinder rebuild kit, the master in there is original. I should also have heater core lines somewhere, I only put like 5k on them and bought them brand new, OEM.

I feel like Jay Stacey has been trying to sell a '90 AWD transmission since like...before I was born....but he recently changed his sig so I'm not sure.

I have an EVO8 MAF with a 1G Adapter Harness; plug and play.

Look in my for sale tread for a pic.

Ghislain

Sold it. sorry. But is came with a t case.

Ive got 4 or 5 trannies and tcases but im in sudzzzz. And unsure of conditions.

I will be sending out some messages soon!

As Lucian mentioned, I will also be looking for a brake setup
I don't care if it's 1G normal brakes, or the big brake setup for the front, calipers are most important.

I have front and rear 1G stock calipers, as well as a 1G bov, mint uncrushed. Anything else just ask as I have a lot of 1G parts.

PM will work best

Thanks

Brian

If you need parts from Brian, I can probably run them from Kitchener to Toronto to shorten your drive.

Thank you Jeremy, thanks to everyone. The amount of responses I've gotten so far has been awesome. I've tracked down a lot of stuff already.

It's going to be a pretty much stock build. My goal is to just get this thing back on the road and sitting pretty.

I've got a 2G MAS and plug, if it's still in the box, and I didn't give it to Gui'.

Hrmm, can't recall.

Anyhoo', if you need the harness lemme know.

14B boosted great, little shaft play and 2G ported manifold (ported by Brendan Warwick), on my parts car.

You have options. Woot!

I have a tranny + Tcase

I have a 14b and manifold. message for details.

Also have a 2g MAFS. Cheap cheap..

Messages are being sent out!

I have a set of good, working condition single-piston front calipers off my '92 with pads and rotors. Don't currently have lines for them (until I install my S/S lines), but let me know if interested. Should also have a spare uncrushed 1G BOV somewhere, just need to find it.

Aren't your wheels already apart? Spend 5 minutes and put your S/S lines on already

Gingers aren't to speak until spoken to.

Don't you have some broken exhaust studs to fix?

Also! To add to the list I'm looking for 2 of the black stocker wheels, or a full set of 4 normal 2G 17s, or even 1GB wheels, but not the swirlies from the 1GA.

Rubber or not, doesn't matter.

If you work something out with Kyle Guba I can grab a tranny and t case from sudbury and bring it to oshawa for you

Thank you Luc! I really appreciate it, I will be in contact with everyone pretty much to find out the best way to get this car back on the road that will be quality and not hurt my wallet too much

Giving everyone a head's up. I no longer need a motor, so that is off the list!

Did you find a 1g BOV? Pretty sure I still have 1 or 2 at my parents in the random box of parts.

Not looking to make any money off of them - so cover the shipping and they are yours.

Works for me brotha! I'll shoot you a message in a minute.

i have a 3" turboback stainless exhaust hi-flow cat stainless flex section good muffler and I believe a megan downpipe. looking for $250

Will also need I believe, a 1GB blinker section without a cracked bolt hole, haha. I know it's quite hard to find, but that's what's on the list.

I would take both sides if you would like to do that