OEM Axle Nut & Washer
need front psgr side and no one seems to stock it.
Parts places need pitch etc of it.
Any help would appreciate it

Are you talking about the big ass castle nut on the hub end of the axle?

Oh yes!!
Stephen actually just called me and may have a set!!
Love this site!!
Thanks bro!

Not quite true that no-one stocks them

RTM has them (as hinted above) and any parts store should be able to get them same day.

Straight to the goods...
https://www.rtmracing.com/xcart/product.php?productid=17938&cat=1249&page=1

Looks like M22 x 1.50. You need 32mm socket, for all for corners.

http://www.dsmtuners.com/threads/rear-axle-thread-size-pitch.367284/

Thread: M22-1.5; Hex: 32mm; Height: 13.2mm
Alternate/OEM Part Number(s): 4954921000, 4955121000, 9004170265000, 9004208019000, MB109025, MB109029
http://www.rockauto.com/catalog/moreinfo.php?pk=15586&cc=1433929

I have seen castle nut, o-rings and cotter pins at Lowes by Markham/Steeles, not sure if they have the right size.

I just dropped by Markham Mitsubishi, you should be able to get them through them, prices are pretty reasonable to even lower compared to other quotes I got for parts.

www.markham-mitsubishi.ca

Using Mitsubishi part number is best/fastest way: MB109025 MB109029.

I just talked to the new manager there, Raymond, and I mentioned that after Mike (former DSM'er) left (yyyyeeeeeaarrrrs ago), they still offered club DSM discounts, but he would like to see prove of such discount. I offered to bring him an old receipt showing the discount.

If you or anyone can do that before me (show a Mitsubishi Markham parts receipt with ca.DSM club discount) , that will help the rest of us

Just before Ziggy's post I had mentioned Stephen helping me out which is great!!

I know Ziggy has enough inventory to put together a monster dsm in a heartbeat. Shipping is blistering fast but I did want to get to this tonight.
Jaime took it to a new level!
And will keep this in mind for the just in case scenario!
And thank you so very much for the insight. Local bolt guys only have up to 1 inch that I had found so all this info was amazing considering how short notice the post was.