So my car is not getting spark on 2&3 , i swapped coil pack and power transistor and nothing changed . I checked my wiring since i did extend some of the wiring to for a wire tuck , but it seems like everything is color matched and is getting power . 12v to coil pack and about 0.5-0.6 v to power transistor .

So im stumped here , but I did notice that when I unplug my Camshaft position sensor (2g 97 sensor) that noting happens ?
i swapped it with a known running one and still nothing happens , it keeps running on 2 cylinders no idle fluctuations . Could it be position of it be backwards ?

Are you positive its not getting spark. It so it sounds like wiring to me. Is your power the same from 1&4 to the transistor cause it should be 12v till the ecm tells the transistor to ground the coil (at least by a 1g wiring diagram it is)

Problem is solved ! its turns out it was the wiring . There is two black with white stripe wires coming from the power transistor and I mixed them up when I extended the harness , stupid me