Both are non split thrust bearing blocks!

#1 $300

Was a fresh build, oil pump failed and it eventually lead to spun rod bearings. 85.5mm bore (0.20) ARP Main studs (Aligned honed) and Decked for MLS head gasket, Don't know how much was taken off though. Also has Aluminum plug for BSE. PM for pictures!

#2 $100

Pulled from an Evo 1. Never been machined, Comes with main caps as well. Good for rebuild.


$230

ARP L19 head studs, Torqued once during assembly and again after a few heat cycles.