Previous Thread
Next Thread
Print Thread
Rate Thread
Talon part out 1ga and 1gb #449971
August 02, 2016 12:53 am UTC
August 02, 2016 12:53 am UTC
Joined: Feb 1999
Posts: 66
Orillia,Ontario,Canada
H
Harry Anderson Offline OP
Regular Member
Harry Anderson  Offline OP
Regular Member
H
Joined: Feb 1999
Posts: 66
Orillia,Ontario,Canada
It’s time to part out all of my Eagle Talon 1ga and 1gb stuff. I have owned, rally raced, driven, and worked a few of these since they were introduced in the 90’s.
Some of the parts are ready to go and some will have to be pulled.
93 AWD TSI Rolling Chassis. - 188,000k on the shell, some rust but still solid. I am the original owner, purchased in 93. The vehicle was a insurance write off after it was pelted with hail. It was a shame as it was in great shape. This was to be Rallycross build but I don’t have the time. It has been stripped down.
Some of the items still on the vehicle
KYB AGX struts and shocks with stock springs – about 50,000k on them
Steering rack still intact
Stock seats and belts
Front stock duel piston brake calipers
Rear stock single calipers
4 Bolt rear differential and drive shafts
Blower motor
4 - 17” 5 spoke wheels with winters
Many other parts and body parts, just ask
Some of the items off the vehicle or spares
7 Bolt long block, full refreshed with about 3,000k on it. Rings, Bearings, Timing belt kit, Rebuilt Head, Stock Turbo. Runs good. Numbers are good. Ready to drop in and go.
6 Bolt long block, not sure how many k on this motor. It was in a 93 AWD TSI that I purchased as a winter car and was ran great when I parted out the vehicle, so I kept it as a spare. Ready to drop in and go.
2- 23 spline Transfer cases
2- 5 Speed Transmissions, 1 working, 1 needs work
Shifter cables
Exhaust Parts
4 Engine and drivetrain mounts with Polyurethane bushings
2 ECUs- Eprom
1 ECU – Non Eprom
Blow off valves
Intercooler and intake parts
MAS and air box
K &N filters
Newer rad and fans
Starters
Ignition parts
Alternators
Steering Pump
Wiper Motors
Front Seats and Belts
Pullies
Bare Head and Valve Cover
Window controls and motors
Back and side Glass
The list are just some of the items available. Let me know what you looking for, I possibly have it.
The list will be updated with additions and as items are sold.
If someone is interested in everything then a package price will be offered.
All prices are negotiable, shipping cost or pick up will be the responsibility of the buyer. Some items might even be free.
EMT or Cash will be accepted.
PM me if interested, have questions or need pics.
Harry

Re: Talon part out 1ga and 1gb [Re: Harry Anderson] #450205
August 13, 2016 03:51 pm UTC
August 13, 2016 03:51 pm UTC
Joined: Feb 1999
Posts: 66
Orillia,Ontario,Canada
H
Harry Anderson Offline OP
Regular Member
Harry Anderson  Offline OP
Regular Member
H
Joined: Feb 1999
Posts: 66
Orillia,Ontario,Canada
Here are some pics for some of the items.
Harry

<iframe width="480" height="360" src="http://s234.photobucket.com/user/Drivefixx/embed/slideshow/"></iframe>

Re: Talon part out 1ga and 1gb [Re: Harry Anderson] #450206
August 13, 2016 03:52 pm UTC
August 13, 2016 03:52 pm UTC
Joined: Feb 1999
Posts: 66
Orillia,Ontario,Canada
H
Harry Anderson Offline OP
Regular Member
Harry Anderson  Offline OP
Regular Member
H
Joined: Feb 1999
Posts: 66
Orillia,Ontario,Canada

Re: Talon part out 1ga and 1gb [Re: Harry Anderson] #450329
August 19, 2016 02:10 am UTC
August 19, 2016 02:10 am UTC
Joined: Feb 1999
Posts: 66
Orillia,Ontario,Canada
H
Harry Anderson Offline OP
Regular Member
Harry Anderson  Offline OP
Regular Member
H
Joined: Feb 1999
Posts: 66
Orillia,Ontario,Canada
1 ECU Eprom sold
1 Transmission sold
1 Transfer case sold

Re: Talon part out 1ga and 1gb [Re: Harry Anderson] #450354
August 22, 2016 10:17 pm UTC
August 22, 2016 10:17 pm UTC
Joined: Nov 2001
Posts: 471
toronto
C
chuck roach Offline
Serious Member
chuck roach  Offline
Serious Member
C
Joined: Nov 2001
Posts: 471
toronto
HI, I could use the shifter cable ends and bushings. I could also use the accelerator cable if you have a non cruise model.
Radiator harness connectors and the connector under the fuse box for the check engine connection.
Thanks in advance.
Charles


DR colt.
Re: Talon part out 1ga and 1gb [Re: Harry Anderson] #450386
August 25, 2016 12:22 am UTC
August 25, 2016 12:22 am UTC
Joined: Jun 2003
Posts: 500
Oshawa
S
Steve Rode Offline
Serious Member
Steve Rode  Offline
Serious Member
S
Joined: Jun 2003
Posts: 500
Oshawa
sent you a message about the seats.


'93 Tsi AWD AT, 16G Turbo,3" front to back
'11 Evolution X, stock
Re: Talon part out 1ga and 1gb [Re: Harry Anderson] #450409
August 26, 2016 12:49 am UTC
August 26, 2016 12:49 am UTC
Joined: Feb 1999
Posts: 66
Orillia,Ontario,Canada
H
Harry Anderson Offline OP
Regular Member
Harry Anderson  Offline OP
Regular Member
H
Joined: Feb 1999
Posts: 66
Orillia,Ontario,Canada
I need to have everything gone by the end of this weekend.
No offer will be refused. I would prefer to see someone that could use any of this stuff put to use.
If not its going to the wreckers.
Thanks
Harry

Re: Talon part out 1ga and 1gb [Re: Harry Anderson] #450426
August 26, 2016 11:47 pm UTC
August 26, 2016 11:47 pm UTC
Joined: Nov 2001
Posts: 471
toronto
C
chuck roach Offline
Serious Member
chuck roach  Offline
Serious Member
C
Joined: Nov 2001
Posts: 471
toronto
$50 for the stuff i mentioned?


DR colt.
Re: Talon part out 1ga and 1gb [Re: Harry Anderson] #451072
September 29, 2016 06:31 pm UTC
September 29, 2016 06:31 pm UTC
Joined: Feb 1999
Posts: 66
Orillia,Ontario,Canada
H
Harry Anderson Offline OP
Regular Member
Harry Anderson  Offline OP
Regular Member
H
Joined: Feb 1999
Posts: 66
Orillia,Ontario,Canada
I have relocated to Orillia, Ontario. These are the items left.

7 Bolt long block, full refreshed with about 3,000k on it. Rings, Bearings, Timing belt kit, Rebuilt Head, Stock Turbo. Runs good. Numbers are good. Ready to drop in and go.

6 Bolt long block, not sure how many k on this motor. It was in a 93 AWD TSI that I purchased as a winter car and was ran great when I parted out the vehicle, so I kept it as a spare. Ready to drop in and go.

ACT Clutch with 6 Blot Flywheel
Front stock duel piston brake calipers
Rear stock single calipers
Aluminum Front Strut Brace
4 Engine and drivetrain mounts with Polyurethane bushings
1 ECU- Eprom
1 ECU – Non Eprom
Blow off valves
Intercooler and intake parts
MAS and air box
Starter
Power Steering Pump
Ignition parts
3 Stock Wheels

Pictures
http://s234.photobucket.com/user/Drivefixx/library/

All prices are negotiable, shipping cost or pick up will be the responsibility of the buyer. Some items might even be free.
EMT or Cash will be accepted.
PM me if interested, have questions or need pics.
Harry

Re: Talon part out 1ga and 1gb [Re: Harry Anderson] #451123
October 01, 2016 03:29 am UTC
October 01, 2016 03:29 am UTC
Joined: Dec 2006
Posts: 1,287
ontario
Sven Hebbard Offline
Serious Member
Sven Hebbard  Offline
Serious Member
***
Joined: Dec 2006
Posts: 1,287
ontario
pmd

Re: Talon part out 1ga and 1gb [Re: Harry Anderson] #451220
October 07, 2016 01:45 am UTC
October 07, 2016 01:45 am UTC
Joined: Feb 1999
Posts: 66
Orillia,Ontario,Canada
H
Harry Anderson Offline OP
Regular Member
Harry Anderson  Offline OP
Regular Member
H
Joined: Feb 1999
Posts: 66
Orillia,Ontario,Canada
6 Bolt engine, ACT clutch and flywheel sold.

Re: Talon part out 1ga and 1gb [Re: Harry Anderson] #451298
October 12, 2016 10:41 pm UTC
October 12, 2016 10:41 pm UTC
Joined: Feb 1999
Posts: 66
Orillia,Ontario,Canada
H
Harry Anderson Offline OP
Regular Member
Harry Anderson  Offline OP
Regular Member
H
Joined: Feb 1999
Posts: 66
Orillia,Ontario,Canada
7 Bolt engine sold.


Powered by UBB.threads™ PHP Forum Software 7.6.1.1