Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165573
October 14, 2004 06:31 pm UTC
October 14, 2004 06:31 pm UTC
|
Joined: Apr 2002
Posts: 631 Scarborough, ON
Chris Krawczyk
Member
|
Member
Joined: Apr 2002
Posts: 631
Scarborough, ON
|
Jesse I have been in the same boat as Mike D., No couplers since July. Since the silicone order has been cancelled, and you got the money back, I would in turn like to get my money back. This should make things simple for you, just one visit to the post office will fix this on going problem. I will send you my address through PM.
Chris K.
1990 Eagle Talon, TSI AWD - SOLD 2002 Mazda Pro 5
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165575
October 15, 2004 02:19 am UTC
October 15, 2004 02:19 am UTC
|
Joined: Nov 2002
Posts: 363 Toronto
Sean McNair
Member
|
Member
Joined: Nov 2002
Posts: 363
Toronto
|
I just received this message from Jim Stieben, www.hightempsilicone.com, he wanted me to post it: Sean, You and I spoke a few months back about Mr McLean and the silicone issues as well as the LACK of customer service. I am writing this to you in hope that you will copy and paste this message on the forum. I have received my 6th call/complaint about this issue and I am about at my limit. Jesse did in fact place an order with us for red silicone hoses. More specifically the order was for 90º elbows, transitions and couplers. We have had his order sitting here for over 8 weeks because we have not yet made payment. As far as I know no attempt of payment has actually been made. We will not release any international shipment unless payment has been sent. I am truly disappointed in Jesse for leading on the members of the forum. We are not connected to Mr McLean in anyway other than the first purchase order. As far as we are concerned Jesse will no longer be able to purchase our products even if paid in full prior to shipment. If any member of the forum has been screwed out of their hard earned money I will extend the following discounted prices to them. 2.50” 90º elbows, normally $40.95/ea = $32.76/ea 2.50” Couplers, normally $7.25/ea = $5.80/ea 2.00”/2.50” 4 ply Aramid transitions, normally $19.00/ea = $15.20/ea 2.50”/3.00” 4 ply Aramid transitions, normally $19.89/ea = $15.91/ea All prices are US. Please send my most sincerest apologies on behalf of HighTempSilicone. Thank you Jim Stieben Internet Sales www.hightempsilicone.com
2003 G35 coupe http://www.uomeds09.com/DSM/Uploader/files/10/g35.JPG SOLD: 90/93 tsi/gsx mix w/20G, 264, Supra SMIC,cyclone, 650's, SS IP, 3" exhaust,ACT2600/Fidanza, Injen, 2G MAF, AFC/AVCR,.. http://www.cardomain.com/memberpage/702744
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165576
October 18, 2004 12:59 pm UTC
October 18, 2004 12:59 pm UTC
|
Joined: Jun 2002
Posts: 94 Calgary, Alberta
Scott Snyder
Member
|
Member
Joined: Jun 2002
Posts: 94
Calgary, Alberta
|
So when are these tracking numbers being sent out Jesse? You posted that was what you were doing 8 days ago, I'm still waiting and you haven't even looked at the 4 private messages I've sent you since Sept 20... Lets get this over and done with.
Finally driving a DSM again!
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165580
October 26, 2004 07:02 pm UTC
October 26, 2004 07:02 pm UTC
|
Joined: Feb 2002
Posts: 1,958 London, Ontario
Jon Arnett
Serious Member
|
Serious Member
Joined: Feb 2002
Posts: 1,958
London, Ontario
|
Another nice local supplier of couplers and clamps is Ziggy at RTM.
I ordered all of mine from him, and these clamps are awesome. Holding 19psi for the last 3 weeks with no blow offs, and my pipes are not beaded.
I originally tried CT clamps, and to make them tight enough, you strip them...but with Ziggy's, no problems.
*2002 Porsche 911 Silver *2006 BMW 325XIT Black *2003 BMW 325i Silver
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165581
October 28, 2004 01:35 pm UTC
October 28, 2004 01:35 pm UTC
|
Joined: Apr 2002
Posts: 631 Scarborough, ON
Chris Krawczyk
Member
|
Member
Joined: Apr 2002
Posts: 631
Scarborough, ON
|
Jesse I didn't get any answer from you yet, so IM posting this here hoping that you still read this forum. Lets work things it out, and get on with our lives. You might be busy, but sending me an e-mail is the least you could do considering I gave you a free "loan" for the past few months. If I don't hear from you by November 11 (2 weeks from now), I will be forced to take legal steps to resolve this matter.
Chris K.
1990 Eagle Talon, TSI AWD - SOLD 2002 Mazda Pro 5
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165583
November 11, 2004 02:48 pm UTC
November 11, 2004 02:48 pm UTC
|
Joined: Nov 2002
Posts: 284 Gauvreau, NB
Jonathan Arseneau
Serious Member
|
Serious Member
Joined: Nov 2002
Posts: 284
Gauvreau, NB
|
I'm in the same situation, I'm from New-Brunswick, and I can't get it locally, and I'm still waiting and hoping that they will ship it someday, at least before the talon is dead! I really don't know what to do next, who to speak to?
90 Talon TSI AWD - 14B ported Turbo/2g ported manifold/2g ported O2/3" Full exhaust,Magnaflow Cat and Muffler/2.5" UICP with GM MAF+MAFT/Greddy Type-S BOV/SPEC Stage II Clutch/MBC
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165586
November 24, 2004 10:00 pm UTC
November 24, 2004 10:00 pm UTC
|
Joined: Nov 2002
Posts: 284 Gauvreau, NB
Jonathan Arseneau
Serious Member
|
Serious Member
Joined: Nov 2002
Posts: 284
Gauvreau, NB
|
Yes, I heard the same thing, about 2 weeks ago, but haven't heard or received anything since then.
90 Talon TSI AWD - 14B ported Turbo/2g ported manifold/2g ported O2/3" Full exhaust,Magnaflow Cat and Muffler/2.5" UICP with GM MAF+MAFT/Greddy Type-S BOV/SPEC Stage II Clutch/MBC
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165588
November 25, 2004 02:09 am UTC
November 25, 2004 02:09 am UTC
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
I would have broken legs by now.
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165589
November 26, 2004 01:04 am UTC
November 26, 2004 01:04 am UTC
|
Joined: Jun 2002
Posts: 94 Calgary, Alberta
Scott Snyder
Member
|
Member
Joined: Jun 2002
Posts: 94
Calgary, Alberta
|
He contacted me on 13 Nov saying it would be shipped out in a week but I haven't heard from him since...
Finally driving a DSM again!
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165591
December 04, 2004 04:07 pm UTC
December 04, 2004 04:07 pm UTC
|
Joined: Jun 2002
Posts: 94 Calgary, Alberta
Scott Snyder
Member
|
Member
Joined: Jun 2002
Posts: 94
Calgary, Alberta
|
I've waited as long as I am willing to Jesse... Either I get the pipes for Christmas or my money or on January 2/05, I am going to the cops with this whole thread and our messages printed along with my receipt of the money order. You told me three weeks ago that my pipes would be on my doorstep two weeks ago... What happened?
Finally driving a DSM again!
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165592
December 14, 2004 12:01 am UTC
December 14, 2004 12:01 am UTC
|
Joined: Jun 2002
Posts: 94 Calgary, Alberta
Scott Snyder
Member
|
Member
Joined: Jun 2002
Posts: 94
Calgary, Alberta
|
*UPDATE* I have received a box with three pipes in it with are presumably the upper intercooler pipe, lower intercooler pipe and the throttlebody elbow of which only two were polished. There were no flanges (I was sent an email from Jesse saying his fab guy quit so it would be unwelded) or couplers or clamps and not even a hole where the BOV flange is supposed to go... There are several rough edges and overall the quality does not appear to be very good. Unless I get another box within the next twelve days with the flanges, couplers, clamps and intake pipe that I ordered (or $200 back), I will be proceeding with going to the police with fraud charges. I have been more than patient with Jesse throughout this entire ordeal but he needs to either complete the deal as promised or face the legal reprecussions.
Finally driving a DSM again!
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165595
December 22, 2004 03:03 pm UTC
December 22, 2004 03:03 pm UTC
|
Joined: Jun 2002
Posts: 94 Calgary, Alberta
Scott Snyder
Member
|
Member
Joined: Jun 2002
Posts: 94
Calgary, Alberta
|
Three days until the deadline and still no contact from Jesse... I guess he likes talking to the police over fraud charges. His reputation doesn't seem to matter to him, nor the fact that he has breached the contract that we all entered into for this group buy. In good faith I paid him the $327 for the full kit (upper intercooler pipe with throttlebody elbow, lower intercooler pipe, intake pipe, all couplers and clamps) in June and in December I finally received three half done pipes (of four), no clamps or couplers. He has not made any attempt at closing the deal in a timely fashion or satisfying the contract so I guess I'll have to give this information over to the police and let them deal with him... I've learned my lesson... Only buy from established, reputable dealers. I may pay more but I know that I would get the product and it would not be sub-standard half done junk. Way to go Jesse(or whatever your name is this week) Another dis-satisfied customer... Had I been given good product and what I ordered, I would have posted my satisfaction...
Finally driving a DSM again!
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165596
December 23, 2004 02:30 am UTC
December 23, 2004 02:30 am UTC
|
Joined: Nov 2004
Posts: 73 Thornhill
Yur Parij
Member
|
Member
Joined: Nov 2004
Posts: 73
Thornhill
|
ive ordered an intake pipe from him as well, weve eben talkingon msn for such a long time and he seemed like a nice guy, but when i needed the pipe shipped, he just disappeared, so if anyone goes to the cops let the people here know, including me.
Cyclone SWAP
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165597
December 24, 2004 05:57 pm UTC
December 24, 2004 05:57 pm UTC
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
I would stop slandering him publicly, it wont help your case if the police get involved.
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165598
December 24, 2004 06:10 pm UTC
December 24, 2004 06:10 pm UTC
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Hey Dom, none of these guys said any "slander" about Jesse. Infact you were the one threatening to break legs. :rolleyes: :rolleyes: :rolleyes:
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165599
December 24, 2004 06:26 pm UTC
December 24, 2004 06:26 pm UTC
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
I didn't threaten to break anyones legs. If i was in this group buy i would have broken legs by now, did i say whos? no. And there was reference to his reputation, slandering is defaming someone, i.e his reputation.
And why are you posting? i thought you were to good for this board? Stop looking for a fight cause youre bitter about the FPR, suck it up you wimp.
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165601
December 24, 2004 08:11 pm UTC
December 24, 2004 08:11 pm UTC
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Your absolutely correct Dom, they are ruining his reputation. After all Jesse sent everyone superior pipes!
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165602
December 25, 2004 02:31 am UTC
December 25, 2004 02:31 am UTC
|
Joined: Jan 1970
Posts: 4,971 Beamsville, Ont, Canada
Steve Kinnaird
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Jan 1970
Posts: 4,971
Beamsville, Ont, Canada
|
Keep this on topic with the people directly involved.
Now, I'll have all kinds of time to talk about DSMs, because I won't be busy fixing mine!
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165603
December 25, 2004 08:01 pm UTC
December 25, 2004 08:01 pm UTC
|
Joined: Mar 2003
Posts: 5,126 Toronto
Rob Cauduro
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Mar 2003
Posts: 5,126
Toronto
|
Only three months till its been a year since this thread started. Still no intakes for most of us, and a few others havent received squat. The rest of us that have received something arent really 100% happy with the product. Speaking with Jesse on the phone a long while back numerous times led me to beleive he was a stand up guy and we had alot in common. What ever made this deal turn out like this is something we'll never know. The only thing that really BURNS me is all his empty promisses. I hate being lied to!! If he would have been straight up and honest from the get go, instead of feeding us with a big pile of BS, Im sure alot of us wouldnt have been so furious. Who ever hasnt received anything or wants whats missing should not hesitate one bit to contact any authorities. Sean contacted phone busters already so they have info on Jesse and it would be best to update them with the current situation. My friend has decided to cut his loses and say screw it a long time ago, he no longer cares about an intake. Merry F*kin X-mass
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165604
January 01, 2005 12:25 am UTC
January 01, 2005 12:25 am UTC
|
Joined: Nov 2004
Posts: 73 Thornhill
Yur Parij
Member
|
Member
Joined: Nov 2004
Posts: 73
Thornhill
|
well jesse appeard on my msn today, he told me that my pipe will come in 2 weeks FOR SURE, so i otld him that about 10-20 people are waiting for their pipes or money on this forum, so he said that it was his friend who started this thread, and he has all the pipes, but one owed money to the other so no one got the pipes, he told me that everything is settled no, the hes gonna start shipping them very soon, WELL, i hope this time its the truth
Cyclone SWAP
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165605
January 03, 2005 12:41 am UTC
January 03, 2005 12:41 am UTC
|
Joined: Jun 2002
Posts: 94 Calgary, Alberta
Scott Snyder
Member
|
Member
Joined: Jun 2002
Posts: 94
Calgary, Alberta
|
If that is true then why doesn't he post it rather than a third party? All I've got so far is three useless pipes which does not even come close to fullfilling the deal that was made and paid for... No couplers, no clamps, missing a intake pipe and no FLANGES! Very professional.
Finally driving a DSM again!
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165606
January 03, 2005 12:48 am UTC
January 03, 2005 12:48 am UTC
|
Joined: Nov 2004
Posts: 73 Thornhill
Yur Parij
Member
|
Member
Joined: Nov 2004
Posts: 73
Thornhill
|
well i think hes banned from this site
Cyclone SWAP
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165607
January 03, 2005 12:27 pm UTC
January 03, 2005 12:27 pm UTC
|
Joined: Jan 1970
Posts: 4,971 Beamsville, Ont, Canada
Steve Kinnaird
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Jan 1970
Posts: 4,971
Beamsville, Ont, Canada
|
No, he's not.
If Jesse is not posting anything here, it's his choice. Not ours.
Now, I'll have all kinds of time to talk about DSMs, because I won't be busy fixing mine!
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165608
January 14, 2005 06:01 am UTC
January 14, 2005 06:01 am UTC
|
Joined: Jun 2002
Posts: 94 Calgary, Alberta
Scott Snyder
Member
|
Member
Joined: Jun 2002
Posts: 94
Calgary, Alberta
|
Hmmm, It's been two weeks now since his two week deadline... Oh look, now it's past... :rolleyes: Anyone have any contact with Jesse or is he still in Limbo?
Finally driving a DSM again!
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165609
February 18, 2005 03:54 am UTC
February 18, 2005 03:54 am UTC
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Any news from Jesse anybody ? I e-mailed him 2 weeks ago and I still got no news...
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165610
February 20, 2005 07:03 pm UTC
February 20, 2005 07:03 pm UTC
|
Joined: Jun 2002
Posts: 94 Calgary, Alberta
Scott Snyder
Member
|
Member
Joined: Jun 2002
Posts: 94
Calgary, Alberta
|
I've heard nothing so it's going to the cops to sort out...
Finally driving a DSM again!
|
|
|
Re: 2.5" Mandrel Bent Intercooler pipes!!!
#165611
February 25, 2005 01:31 am UTC
February 25, 2005 01:31 am UTC
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
If anyone has news, please post feedback...
|
|
|
|
|