MAF-T injector selection with chip

Print Thread

Rate Thread

MAF-T injector selection with chip #175948 August 31, 2005 06:11 am UTC August 31, 2005 06:11 am UTC
Joined: Feb 2002 Posts: 818 Calgary, Alberta Gabriel Shim OP Serious Member
Gabriel Shim OP Serious Member Joined: Feb 2002 Posts: 818 Calgary, Alberta	I've read from this board that it is suggested to set the MAF-T to 450cc when using a chip (eg. 650cc's)and have all the other settings set at zero and use a SAFC to tune with. I've tried this and I found that at idle, my SAFC is set at +15 (800RPM) and -12 to -15 from 2000 RPM to 4000RPM. My question is this; does the idle setting on the MAF-T effected through out the entire RPM range? Or just at Idle? If its just at the Idle, why can't you just adjust the Maf-T idle setting to zero on the SAFC? Thanx man 94 Talon ES(Extra Speed)

Hop To