Just a tip to everyone to inspect any parts you buy that are sold as good working parts. Even if they come fromsomeone you trust, because thye may have been told it was good by someone else, and not checked it themselves.

I say this after pulling a cylinder head not once, but TWICE. Got it from someone i trust, who said it was good. Pulled it after compression was low and coolant pushed. Warped 21 thou. Got it machined. Put it back on. Still no compression. DOH!! Forgot to check the valves. All 16 were seating porly asa result of the 21 thou warp.

4 days and 2 head gaskets later it'll be running. Costly lesson....... check everything!!!