Got my driver's side from Jeff Mitchell (thanks again Jeff). Trying to install it, I can't figure out how it bolts on? There's 2 bolts on the fog lights but no corresponding holes on the car. I don't remember removing a bracket from the car. And if I did, I'm normally the type to keep all the parts in the same box. The shop manual was of no use. Help?

[ November 25, 2001: Message edited by: Tin H Ly ]

There should be a bracket to bolt on the fog light, I remember when I had to remove the fog lights to install my intercooler, I broke the screws from the fog lights bracket and I had to drill them out.

<A HREF="http://pics.dsm.org/files/front_01.jpg">Here's a pic of what it should look like with the fogs on</A> where you can see the bolts, etc.

There definitely should be a little bracket in the grill area with holes for the bolts in the fog to screw into. Maybe it's just all gummed up with dirt or something??

[ November 25, 2001: Message edited by: Jeff Mitchell ]

Ugh! I'm going to have to find a Talon in the parking lots and take a look.