I started these quite some time ago, and there were quite a few guys interested. I got busy, and they went on the "back burner" as these projects often do. In any case, it has been a little slower lately, so we have had a chance to finish the initial batch of these. They replace the stock alternator pulley, and they are 12.5% smaller in diameter, so the alternator will spin 12.5% faster. This is good if you should have an underdrive crank pulley, or a large stereo that draws lots of power. It can also help if you have the headlights dimming at idle. I don't know whether the size difference will require a change of belt or not. I could not make them any smaller than 12.5% smaller, as I was starting to run into problems with interference with the alternator casting. They also weigh less than one third what the stock pulley does, and they are nice and shiny .

I will be selling these on my website for probably $60.USD, but I thought I would make them available to you guys for a little less. At $52.17 CDN., That would work out to $60. with GST and PST, assuming you pick up. At that price, it would also have to be cash or email transfer. Paypal or credit card docks me 3.5%. Shipping would be extra.

It will be first come first served, but I have about 20 of them available.

My PM box is usually full, so email to: rtm@mountaincable.net

A slightly shorter belt wouldn't hurt, but the stock belt will be ok as long as it's fairly new, and not stretched out.

what is your website?

The website is only recently re-opened, and the store is just being setup. We need to "stock the shelves", add every item into the store, descriptions, pictures, pricing, etc.,....so it will take a while. These pullies probably won't even make it into the store for this run. It will likely be the next batch of them before they get added to the store. Also, the store is setup in USD to sell into the US. In any case, it is at: www.rtmracing.com

If anyone is interested, I will bring a couple of these to Yorkdale on sunday