Re: Turbo Resistor pack
#205265
July 23, 2005 03:06 pm UTC
July 23, 2005 03:06 pm UTC
|
Joined: Jul 2000
Posts: 383 Hamilton, Ontario, Canada
Dino Mustedanagic
Member
|
Member
Joined: Jul 2000
Posts: 383
Hamilton, Ontario, Canada
|
Hi there
Malcolm hopefully this will hel a lot i have done it..
http://www.ecanfix.com/~mdhamilton/ecuschematics.html
1990 Eagle Talon NT Converted TSi(Ripped) 1990 TSI AWD BABY (Ripped) 1992 TSI FWD (Getting Ready) ICQ 37391874
|
|
|
Re: Turbo Resistor pack
#205270
July 24, 2005 11:27 pm UTC
July 24, 2005 11:27 pm UTC
|
Joined: Jul 2001
Posts: 428 Mississauga, ON, Canada
Scott Cumming
Serious Member
|
Serious Member
Joined: Jul 2001
Posts: 428
Mississauga, ON, Canada
|
OK that doesn't even make sense to me and I've done it.
Simple-
1.open up wire loom 2.find the thicker wire coming from each injector (yellow I think) 3. cut the 4 thick injector wires 4. wire the 4 black wires from the irp to each cut yellow wire running to each injector 5. The white wire attaches to ONE thick yellow wires (that you cut) running back to the ecu 6. the remaining 3 yellow thick wires get taped up and are not used
if you can't understand that email me and I'll make a detailed diagram
'90 Laser RS N/A-->turbo (finally!) "Laserburn" (ouch) '95 Eagle talon (dads ride)
|
|
|
|
|