hey gary.........would you be willing to sell me your ashtray from the middle console. Mine is broken. PM me if you have it.
Thanks.

Sarah

Someone has requested just my exhaust manifold so this morning I made my way out to the garage for the first time in nearly a month and took it apart from the turbine inlet spacer plate. I also took some more detailed pics of the turbo and the install pieces that come with it. Install pices included are the head to exhaust manifold spacer plate and gaskets, exhaust manifold to turbine inlet spacer plate, SS oil feed line, oil return line, water feed and return brackets, and the ceramic coated O2 sensor housing.








This turbo is just SCREAMING for a new home, she will not disapoint...

Thanks
Gary

UIC Pipe is sold.
Crushed 1G BOV is sold.
Starter is sold.
Rear center tail light segment is sold.

Ok since I still have the complete exhaust side setup from the manifold to the tip of the tail pipe (minus the O2 sensors! ) I would be willing to make a package deal to anyone who is interested. $1200 takes the manifold, turbo and install pieces, ceramic coated O2 sensor housing, down pipe, hi flo cat and cat back exhaust as well as removable exhaust baffle.

$1200 for a complete exhaust side setup with turbo that is capable of running 12s in the quarter mile...

I still have a tonne of interior trim pieces, seats, headliner, air bags etc etc.

Thanks
Gary

This completely slipped my mind since my wheels have been stored on my wheel rack (yes, I have a wheel rack, I have 5 different sets of wheels on it right now too! ) but I still have the stock 16 inch swirly wheels, white with the polished lip. They have Good Year Eagle tires on them that will most likely need to be replaced soon but should still have a little bit of mileage left in them. They have a little bit of nicks and scratches but overall are in pretty decent shape, could make a good set of race wheels for anyone who does Auto X or lapping days, or maybe winter rims or just a change to something different for someone.

Anyways, $300 takes them, plus shipping of course!

Thanks
Gary

hey do you have a good heater blow motor? I could also use that (i think mine is f'ct up)
let me know and I will take both (also the ashtray, even though i dont need it cause I dont smoke but mine is broken and it bugs me!)LOL

Hi Sarah, the blower for the heater worked fine, I just need to figure out where it is and see if I can get it out!

I will keep you posted.

Thanks
Gary

gary.....whats up

please tell me you have a steering rack

hey gary....that is actually not the problem, so I dont need it. For now, just the ashtray, but I am doing some stuff on teh car over the weekend so by monday I will know for sure if i will be needing other parts.

Thanks

I've replied to your email.

Thanks
Gary

Steering rack is now out of the car and up for grabs, here are some pics...

I need the steering rack, going mitsu tomorow to check if it will fit on a '97 tsi awd.....hopefully it will

Do you have the plastic shrouding/shield that goes between the drivers front wheel and the engine compartment? Not the one at the front of the wheel well, but towards the inside.

Thanks,

Chris.

Hi Chrs, no I don't have that piece, sorry.

Thanks
Gary

Front shocks, springs, control arms (basically the entire suspension assembly, both sides) and the front axles are sold.

I only have a few major components left, the turbo, the exhaust manifold, turbo back exhaust, intake manifold. Lots of other odds and ends like interior pieces etc kicking around.

I am looking to get the stuff gone now, open to offers but please keep in mind my performance parts are in very good condition so try to keep them reasonable.

Thanks
Gary

Rear diff is sold.

Pretty well everything is off the car now, the only remaining items are the windshield (chip in the middle from removing the rear view) passenger door/window, fuel tank, front cross member, ABS unit (seized bolt and I didn't feel like fighting with it, I know it will come out though with a little coercion!) and the core of the dashboard and wiring that is left (most plugs have been clipped and removed)

The frame should be relatively easy to have straightened at an alignment shop so if anyone is looking for a base to build a race car or some sort of hybrid beast out of this might be a good starting point for you as it is ABSOLUTELY factory fresh looking, I cannot believe how clean the paint and welds etc are. I will be shipping what is left of the car to the wreckers after April is done and they will give me about $100 for what is there, if anyone wants the carcass all you have to do is offer me more than $100 and come and get it before the end of April.

Once the car goes to the wrecking yard all stock components that are left will be going with it. I have decided to part out the exhaust system, Down Pipe/cat is most likely sold, just waiting for payment on that but I will take offers on the mid pipe and tail pipe now, I will also be holding on to the exhaust manifold, turbo, O2 sensor housing and 16 inch swirlies at least for a little while so if anyone wants any of those just PM or email me and offer and we will see if we can work something out.

The end is in sight so speak up if you still want any components!

Thanks
Gary

Downpipe/Cat sold.
Upper/lower heat shields sold.

Getting close to the end now, a few guys came by this weekend and did a good job cleaning up some of the excess baggage I had laying around. Now gone are...

Rear hatch/wing
Drivers door
Passenger door skin
Shift cable(s)
TCase
Drive shaft
Upper center HVAC unit
Cruise/fog lamp switch unit
Both door sill trim pieces
Secondary fuel sending unit
Front bumper support (the fiberglass piece on the inside of the bumper that ties into the frame rails)
Numerous plugs/wires/etc

There may have been other bits and pieces they got too but that is the bulk of the items I can recall.

I still have the HRC Super 16G, ported exhaust manifold, O2 sensor housing and cat back Apex-i N1 exhaust system available (down pipe and cat are gone) Someone must need a hot side upgrade, only missing piece now is the DP/Cat, make me an offer...

Thanks
Gary

I need a drivers mirror, passenger window, and the exterior trim that covers the front wiper motor. Still got those?

I will be in the GTA on Easter weekend, making arrangements to meet several people to deliver the passenger window, cat back exhaust, windshield apron and several other pieces. If anyone is interested in the turbo, o2 sensor housing, ported exhaust manifold I would like to get them gone, $500 takes those three components and I can bring them with me (meeting with others in the Pickering area)

If there are any other pieces people would like that I can fit into my Forester's cargo box I am willing to meet up with you to save on shipping costs, I am aiming to meet with people on the Saturday morning, sometime around 11am in the parking lot where the Mandarin is @ 1725 Kingston road (there is a Timmies there as well) just send me a PM or an email ( turboawd at gmail dot com )

I would really like to close out this part out soon as I am planning on shipping the shell and remaining bits and pieces to the wreckers for weight/salvage value very soon, this is a good opportunity for anyone in the GTA to get any remaining parts at a good price (I WANT THEM GONE!!!!!!!) AND save on shipping!

Let me know!

Thanks
Gary

Time and date are set now as they convenient for everyone. So it will be near the Tim Horton's in the Mandarin parking lot, 1725 Kingston Road in Pickering, 11AM on Saturday. I will be in my silver Forester with a Yakima Rocket Box (cargo box on the roof racks) and will try to park in an open area so there are not a lot of other cars around me etc.

If anyone else wants any parts please email or PM me by Thursday afternoon at 2PM at the latest as I may not be able to accommodate any requests past that time/day.

Thank you
Gary

Do you have a couple of random shields I am looking for perhaps?

- Rear Wiper Pivot Shield
- Seat Belt (Driver Rear) Pivot Shield

I have all the seat belt components in a box, not sure what you mean by the rear wiper pivot shield however the entire rear hatch, wing and wiper are gone so I do not likely still have that.

Thanks
Gary

It's just a piece that goes over the bolt that the wiper pivots on. But since the wiper is sold I doubt you have it.

I just need the plastic shield for the passenger rear belt, let me know what you want for it?

hey gary just wonering if you have a driverside front cv, pass. side inner fender (plastic peice), instument cluster, oil and coolant lines for turbo and a overflow bottle for coolant.

The only item in that list I have would be the coolant overflow bottle. I do have the oil and coolant lines but they go with the turbo since they will be needed to install it.

For the bottle (let me verify when I get home that I can find it!) how about $20 + shipping?

Thanks
Gary

P.S. Eric, I replied to your PM.

Taka care of yourself! If your still interested in parting out, I'll take the functioning ECU please!

Thanks!

-Malcolm
403-547-3833

I would like to know if the Head is good(not warped or cracked) and if the turbo is sold.If not email me here randy_rashid@hotmail.com