|
Big 2g Performance/Stock Part Out
#287295
December 31, 2008 08:49 pm UTC
December 31, 2008 08:49 pm UTC
|
Joined: Aug 1998
Posts: 589
Etobicoke
Paul Saadetian
OP
Serious Member
|
OP
Serious Member
Joined: Aug 1998
Posts: 589
Etobicoke
|
Reluctantly parting out the project car which I no longer have time for. All big parts are available for pick up in King City, no shipping on those items. I will ship smaller parts at buyers expense. Interac email transfer or Paypal+3% is accepted. Unfortunately pics taken in garage didn't turn out well. 97-99 Eclipse OEM front bumper - $100 Mitsu logo and license plate holes have been filled in. The paint is in rough shape, lots of stone chips, but otherwise bumper is in good shape. The central opening has been trimmed to clear a front mount intercooler, and the air ducts have been trimmed to clear intercooler piping. Includes brackets where bumper is bolted to fenders. http://i222.photobucket.com/albums/dd231/saadet4/DSM/front_bumper1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/front_bumper2.jpg97-99 Eclipse OEM rear bumper - $200 Bumper is in great shape. Includes OEM reverse light lenses and brackets where bumper is bolted to quarter panels. http://i222.photobucket.com/albums/dd231/saadet4/DSM/rear_bumper1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/rear_bumper2.jpg97-99 Eclipse OEM side skirts - $200 Skirts are in excellent shape. They have been mostly sanded down and are ready for paint. Door caps are not included. http://i222.photobucket.com/albums/dd231/saadet4/DSM/skirts.jpg97-99 Eclipse OEM high rise spoiler - $200 Spoiler is in excellent condition, factory black paint. Gaskets on mounting surfaces are intact, includes mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/spoiler1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/spoiler2.jpgVIS carbon fiber hood - $425 Excellent condition, perfect fit and finish. Includes silver Hayame aluminum hood pins that wont rust out. Also includes a hood strut system I engineered myself that allows you to ditch the hood prop. The struts require you to drill one hole in each hood hinge and use an existing fender bolt hole for installation. http://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood3.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood4.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood5.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood6.jpg97-99 dual projector headlights - $100 Black housing dual projector headlights. There is a bead of sealant around where the clear lens meets the housing to keep moisture out. Includes Silverstar low beam bulbs. http://i222.photobucket.com/albums/dd231/saadet4/DSM/projectors1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/projectors2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/projectors3.jpg97-99 Eclipse OEM three piece tail lights - $100 Excellent shape. ECLIPSE letters have been removed. Includes gaskets and mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/tail_lights.jpg97-99 Eclipse OEM fog lights - $100 Excellent shape. Includes PIAA white bulbs that match the Silverstar bulbs, OEM bumper bezels, and stainless mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/fogs.jpgRear strut tower brace - $20 Generic no-name rear strut tower brace. Includes grey trim pieces that have already been notched so you don't have to cut yours up. http://i222.photobucket.com/albums/dd231/saadet4/DSM/rear_brace.jpgLots more parts to be posted in the coming weeks as I remove things from the car. If you need any stock parts, PM me with an offer.
|
|
|
Re: Big 2g Performance/Stock Part Out
[Re: Jeremy Davis]
#288624
January 13, 2009 03:10 am UTC
January 13, 2009 03:10 am UTC
|
Joined: Oct 2005
Posts: 10,749
Belleville, Ontario
Ryan Laliberte
No-Lift-To-Shift.... Stock. :)
|
No-Lift-To-Shift.... Stock. :)
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2005
Posts: 10,749
Belleville, Ontario
|
So, where's the performance parts?
AWDAuto 1996 TSi AWD Automagic12.24 @ 113 - Small 16G FP Green HTA - 11.42/123 Team Pump Gas and Meth RTMRacing - Your Canadian source for DSM Parts "Every moment you live is pregnant with the next moment of your life" --Jim CarreyLast Login: September 28, 2021
|
|
|
Re: Big 2g Performance/Stock Part Out
[Re: Jay McClelland]
#288637
January 13, 2009 05:42 am UTC
January 13, 2009 05:42 am UTC
|
Joined: Aug 1998
Posts: 589
Etobicoke
Paul Saadetian
OP
Serious Member
|
OP
Serious Member
Joined: Aug 1998
Posts: 589
Etobicoke
|
Updating first post with what's still available and adding new parts: 97-99 Eclipse OEM side skirts - $200 Skirts are in excellent shape. They have been mostly sanded down and are ready for paint. Door caps are not included. http://i222.photobucket.com/albums/dd231/saadet4/DSM/skirts.jpg97-99 Eclipse OEM high rise spoiler - $200 Spoiler is in excellent condition, factory black paint. Gaskets on mounting surfaces are intact, includes mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/spoiler1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/spoiler2.jpgVIS carbon fiber hood - $425 Excellent condition, perfect fit and finish. Includes silver Hayame aluminum hood pins that wont rust out. Also includes a hood strut system I engineered myself that allows you to ditch the hood prop. The struts require you to drill one hole in each hood hinge and use an existing fender bolt hole for installation. http://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood3.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood4.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood5.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood6.jpgRear strut tower brace - $20 Generic no-name rear strut tower brace. Includes grey trim pieces that have already been notched so you don't have to cut yours up. http://i222.photobucket.com/albums/dd231/saadet4/DSM/rear_brace.jpgYonaka front mount intercooler - $250 Intercooler is in nice shape, a few bent fins that can be straightened out. Comes with mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/IC1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/IC2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/IC3.jpgCustom 2.5" intercooler pipes - $150 These pipes were run from a 50 trim turbo to a Yonaka front mount intercooler to a GM MAF to the throttle body. The piping takes a HKS super sequential BOV. The BOV flange is modular meaning you can unscrew it and replace it with a flange for another BOV. Comes with silicone couplers and t-bolt clamps, 2.5 " piping all the way through, all pipe ends are properly beaded. Some of the pipes have some surface rust and could use a sanding and repainting for the aesthetically inclined. Note that to run these pipes you will likely need either to be running a smaller battery or have the battery relocated to the trunk. See the last picture for an idea of how the upper pipes are run, the path of the lower pipes should be fairly obvious. http://i222.photobucket.com/albums/dd231/saadet4/DSM/pipes1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/pipes2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/engine1.jpgHKS super sequential BOV - $70 Good shape, could use some polishing compound and elbow grease. Comes with snap ring and mini filter. http://i222.photobucket.com/albums/dd231/saadet4/DSM/bov.jpgApexi air filter - $90 Beautiful small little filter in mint shape. Comes with angled three inch high temp silicone coupler and t-bolt clamps to run it straight off a turbo inlet. See engine bay pic above to see how I was running it. Also comes with custom made adapter and stainless mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/intake1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/intake2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/intake3.jpgGM MAF and translator - $200 Both in excellent shape. Sticker was taken off translator box because it looked stupid. GM MAF was polished but could use some elbow grease to return it to it's former glory. Comes with silicone reducer couplers and t-bolt clamps. http://i222.photobucket.com/albums/dd231/saadet4/DSM/translator.jpg
|
|
|
Re: Big 2g Performance/Stock Part Out
[Re: Paul Saadetian]
#288714
January 14, 2009 04:38 am UTC
January 14, 2009 04:38 am UTC
|
Joined: Oct 2005
Posts: 10,749
Belleville, Ontario
Ryan Laliberte
No-Lift-To-Shift.... Stock. :)
|
No-Lift-To-Shift.... Stock. :)
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2005
Posts: 10,749
Belleville, Ontario
|
May I ask if you are selling the turbo setup?
AWDAuto 1996 TSi AWD Automagic12.24 @ 113 - Small 16G FP Green HTA - 11.42/123 Team Pump Gas and Meth RTMRacing - Your Canadian source for DSM Parts "Every moment you live is pregnant with the next moment of your life" --Jim CarreyLast Login: September 28, 2021
|
|
|
Re: Big 2g Performance/Stock Part Out
[Re: Paul Saadetian]
#289311
January 22, 2009 04:14 am UTC
January 22, 2009 04:14 am UTC
|
Joined: Aug 1998
Posts: 589
Etobicoke
Paul Saadetian
OP
Serious Member
|
OP
Serious Member
Joined: Aug 1998
Posts: 589
Etobicoke
|
Update and more parts to add: 97-99 Eclipse OEM side skirts - $200 Skirts are in excellent shape. They have been mostly sanded down and are ready for paint. Door caps are not included. http://i222.photobucket.com/albums/dd231/saadet4/DSM/skirts.jpg97-99 Eclipse OEM high rise spoiler - $200 Spoiler is in excellent condition, factory black paint. Gaskets on mounting surfaces are intact, includes mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/spoiler1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/spoiler2.jpgVIS carbon fiber hood - $425 Excellent condition, perfect fit and finish. Includes silver Hayame aluminum hood pins that wont rust out. Also includes a hood strut system I engineered myself that allows you to ditch the hood prop. The struts require you to drill one hole in each hood hinge and use an existing fender bolt hole for installation. http://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood3.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood4.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood5.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood6.jpgYonaka front mount intercooler - $250 Intercooler is in nice shape, a few bent fins that can be straightened out. Comes with mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/IC1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/IC2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/IC3.jpgCustom 2.5" intercooler pipes - $150 These pipes were run from a 50 trim turbo to a Yonaka front mount intercooler to a GM MAF to the throttle body. The piping takes a HKS super sequential BOV. The BOV flange is modular meaning you can unscrew it and replace it with a flange for another BOV. Comes with silicone couplers and t-bolt clamps, 2.5 " piping all the way through, all pipe ends are properly beaded. Some of the pipes have some surface rust and could use a sanding and repainting for the aesthetically inclined. Note that to run these pipes you will likely need either to be running a smaller battery or have the battery relocated to the trunk. See the last picture for an idea of how the upper pipes are run, the path of the lower pipes should be fairly obvious. http://i222.photobucket.com/albums/dd231/saadet4/DSM/pipes1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/pipes2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/engine1.jpgApexi air filter - $90 Beautiful small little filter in mint shape. Comes with angled three inch high temp silicone coupler and t-bolt clamps to run it straight off a turbo inlet. See engine bay pic above to see how I was running it. Also comes with custom made adapter and stainless mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/intake1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/intake2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/intake3.jpgGM MAF and translator - $200 Both in excellent shape. Sticker was taken off translator box because it looked stupid. GM MAF was polished but could use some elbow grease to return it to it's former glory. Comes with silicone reducer couplers and t-bolt clamps. http://i222.photobucket.com/albums/dd231/saadet4/DSM/translator.jpgFluidyne radiator and SPAL slimline fan - $300 Great condition Fluidyne radiator. Has a few bent fins which can be straightened out. Comes with a 13" SPAL slimline fan, custom stainless brackets for mounting and stainless hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/rad1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/rad2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/rad3.jpgOEM radiator hoses with AC Autotechnic water temperature sensor adapter - $35 Stock rad hoses in great shape. Upper hose is sectioned for an AC Autotechnic adapter where you can install a water temperature sensor. Comes with worm clamps. http://i222.photobucket.com/albums/dd231/saadet4/DSM/rad_hoses.jpgHayame radiator brackets - 10 Good shape, comes with stainless mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/rad_brackets.jpgHamaye radiator cap - 5 This is a stick-on addition to the stock radiator cap, which is included. Good shape. http://i222.photobucket.com/albums/dd231/saadet4/DSM/rad_cap.jpgTurboXS manual boost controller - $60 Excellent condition, comes with two lengths of vacuum tube and a cushion clamp for installation. http://i222.photobucket.com/albums/dd231/saadet4/DSM/mbc.jpgBraided turbo oil lines, AN fittings, and billet flanges - $75 Braided oil feed and return lines. Return line is -10AN, comes with a straight and a 45 fitting, feed line is -4AN with a straight and a 45 fitting. Includes billet flanges for the return line that will bolt up to the DSM oil pan and a Garrett T3/T4 turbo center section. Also includes an adapter fitting for the oil filter housing for the feed line. http://i222.photobucket.com/albums/dd231/saadet4/DSM/oil_lines.jpgJM Fab catchcan - $60 Excellent condition. Includes clamps and lengths of tube long enough to run to the valve cover when the catch can is mounted on the firewall. http://i222.photobucket.com/albums/dd231/saadet4/DSM/catchcan1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/catchcan2.jpgCustom aluminum overflow with AN lines - $50 Very custom coolant overflow bottle. It has -6AN lines running to the water neck and out from the top. Includes a stainless mounting bracket and stainless hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/overflow1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/overflow2.jpgStock front O2 sensor - $20 Good condition, has seen very limited use. http://i222.photobucket.com/albums/dd231/saadet4/DSM/02sensor.jpgCustom side markers - $10 These were clear/chrome side markers. I removed the plastic lens, sprayed the housings in flat black, and resealed the lenses with a generous amount of RTV and JB Weld. Looks sweet on a black bumper. http://i222.photobucket.com/albums/dd231/saadet4/DSM/markers.jpg
|
|
|
Re: Big 2g Performance/Stock Part Out
[Re: Paul Saadetian]
#289632
January 26, 2009 03:01 am UTC
January 26, 2009 03:01 am UTC
|
Joined: Jun 2005
Posts: 177
Newmarket
Branden Jones
Regular Member
|
Regular Member
Joined: Jun 2005
Posts: 177
Newmarket
|
Sad to see your 2g get parted out. Your old 1g is suffering the same fate.
1992 VW Golf GTI 16V - The new project
2004 Jeep TJ - Got Mudd?
|
|
|
Re: Big 2g Performance/Stock Part Out
[Re: Branden Jones]
#289716
January 27, 2009 01:23 am UTC
January 27, 2009 01:23 am UTC
|
Joined: Aug 1998
Posts: 589
Etobicoke
Paul Saadetian
OP
Serious Member
|
OP
Serious Member
Joined: Aug 1998
Posts: 589
Etobicoke
|
Update and a couple more parts to add: 97-99 Eclipse OEM side skirts - $200 Skirts are in excellent shape. They have been mostly sanded down and are ready for paint. Door caps are not included. http://i222.photobucket.com/albums/dd231/saadet4/DSM/skirts.jpg97-99 Eclipse OEM high rise spoiler - $200 Spoiler is in excellent condition, factory black paint. Gaskets on mounting surfaces are intact, includes mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/spoiler1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/spoiler2.jpgVIS carbon fiber hood - $425 Excellent condition, perfect fit and finish. Includes silver Hayame aluminum hood pins that wont rust out. Also includes a hood strut system I engineered myself that allows you to ditch the hood prop. The struts require you to drill one hole in each hood hinge and use an existing fender bolt hole for installation. http://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood3.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood4.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood5.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood6.jpgYonaka front mount intercooler - $250 Intercooler is in nice shape, a few bent fins that can be straightened out. Comes with mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/IC1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/IC2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/IC3.jpgCustom 2.5" intercooler pipes - $150 These pipes were run from a 50 trim turbo to a Yonaka front mount intercooler to a GM MAF to the throttle body. The piping takes a HKS super sequential BOV. The BOV flange is modular meaning you can unscrew it and replace it with a flange for another BOV. Comes with silicone couplers and t-bolt clamps, 2.5 " piping all the way through, all pipe ends are properly beaded. Some of the pipes have some surface rust and could use a sanding and repainting for the aesthetically inclined. Note that to run these pipes you will likely need either to be running a smaller battery or have the battery relocated to the trunk. See the last picture for an idea of how the upper pipes are run, the path of the lower pipes should be fairly obvious. http://i222.photobucket.com/albums/dd231/saadet4/DSM/pipes1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/pipes2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/engine1.jpgApexi air filter - $90 Beautiful small little filter in mint shape. Comes with angled three inch high temp silicone coupler and t-bolt clamps to run it straight off a turbo inlet. See engine bay pic above to see how I was running it. Also comes with custom made adapter and stainless mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/intake1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/intake2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/intake3.jpgOEM radiator hoses with AC Autotechnic water temperature sensor adapter - $35 Stock rad hoses in great shape. Upper hose is sectioned for an AC Autotechnic adapter where you can install a water temperature sensor. Comes with worm clamps. http://i222.photobucket.com/albums/dd231/saadet4/DSM/rad_hoses.jpgHamaye radiator cap - 5 This is a stick-on addition to the stock radiator cap, which is included. Good shape. http://i222.photobucket.com/albums/dd231/saadet4/DSM/rad_cap.jpgStock front O2 sensor - $20 Good condition, has seen very limited use. http://i222.photobucket.com/albums/dd231/saadet4/DSM/02sensor.jpgCustom side markers - $10 These were clear/chrome side markers. I removed the plastic lens, sprayed the housings in flat black, and resealed the lenses with a generous amount of RTV and JB Weld. Looks sweet on a black bumper. http://i222.photobucket.com/albums/dd231/saadet4/DSM/markers.jpgMoroso battery box - $45 Excellent shape, comes with all the necessary hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/moroso.jpg2g ported exuahst manifold - $50 Good shape, no cracks, has some surface rust and could use a good sandblasting. Comes with a multi-layer gasket. http://i222.photobucket.com/albums/dd231/saadet4/DSM/manifold1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/manifold2.jpg
|
|
|
Re: Big 2g Performance/Stock Part Out
[Re: Paul Saadetian]
#290055
February 01, 2009 08:48 pm UTC
February 01, 2009 08:48 pm UTC
|
Joined: Aug 1998
Posts: 589
Etobicoke
Paul Saadetian
OP
Serious Member
|
OP
Serious Member
Joined: Aug 1998
Posts: 589
Etobicoke
|
Update and more parts to add: 97-99 Eclipse OEM side skirts - $200 Skirts are in excellent shape. They have been mostly sanded down and are ready for paint. Door caps are not included. http://i222.photobucket.com/albums/dd231/saadet4/DSM/skirts.jpg97-99 Eclipse OEM high rise spoiler - $200 Spoiler is in excellent condition, factory black paint. Gaskets on mounting surfaces are intact, includes mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/spoiler1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/spoiler2.jpgVIS carbon fiber hood - $425 Excellent condition, perfect fit and finish. Includes silver Hayame aluminum hood pins that wont rust out. Also includes a hood strut system I engineered myself that allows you to ditch the hood prop. The struts require you to drill one hole in each hood hinge and use an existing fender bolt hole for installation. http://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood3.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood4.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood5.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/cf_hood6.jpgYonaka front mount intercooler - $250 Intercooler is in nice shape, a few bent fins that can be straightened out. Comes with mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/IC1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/IC2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/IC3.jpgCustom 2.5" intercooler pipes - $150 These pipes were run from a 50 trim turbo to a Yonaka front mount intercooler to a GM MAF to the throttle body. The piping takes a HKS super sequential BOV. The BOV flange is modular meaning you can unscrew it and replace it with a flange for another BOV. Comes with silicone couplers and t-bolt clamps, 2.5 " piping all the way through, all pipe ends are properly beaded. Some of the pipes have some surface rust and could use a sanding and repainting for the aesthetically inclined. Note that to run these pipes you will likely need either to be running a smaller battery or have the battery relocated to the trunk. See the last picture for an idea of how the upper pipes are run, the path of the lower pipes should be fairly obvious. http://i222.photobucket.com/albums/dd231/saadet4/DSM/pipes1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/pipes2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/engine1.jpgApexi air filter - $90 Beautiful small little filter in mint shape. Comes with angled three inch high temp silicone coupler and t-bolt clamps to run it straight off a turbo inlet. See engine bay pic above to see how I was running it. Also comes with custom made adapter and stainless mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/intake1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/intake2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/intake3.jpgOEM radiator hoses with AC Autotechnic water temperature sensor adapter - $35 Stock rad hoses in great shape. Upper hose is sectioned for an AC Autotechnic adapter where you can install a water temperature sensor. Comes with worm clamps. http://i222.photobucket.com/albums/dd231/saadet4/DSM/rad_hoses.jpgHamaye radiator cap - $5 This is a stick-on addition to the stock radiator cap, which is included. Good shape. http://i222.photobucket.com/albums/dd231/saadet4/DSM/rad_cap.jpgMoroso battery box - $45 Excellent shape, comes with all the necessary hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/moroso.jpg2g ported exuahst manifold - $50 Good shape, no cracks, has some surface rust and could use a good sandblasting. Comes with a multi-layer gasket. http://i222.photobucket.com/albums/dd231/saadet4/DSM/manifold1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/manifold2.jpgFuel lines/filter/regulator kit - $200 All parts in great shape. Includes an Aeromotive fuel pressure regulator with Autometer fuel pressure gauge, and K&N fuel filter. Also includes -6AN braided lines going from fuel pump feed to fuel filter, fuel filter to rail, rail to regulator, and regulator to stock fuel return line. Also includes specialty AN fitting for fuel filter and stock return line. http://i222.photobucket.com/albums/dd231/saadet4/DSM/fuel1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/fuel2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/fuel3.jpgPolished 2g fuel rail - $35 Flanges on both ends have been turned down for a cleaner look. Ends have been tapped for -6AN fittings which have are JB Welded on. Includes stainless hardware and two of the three plastic things that go between the rail and the intake manifold. http://i222.photobucket.com/albums/dd231/saadet4/DSM/fuelrail.jpgPTE 780cc injectors - $175 Excellent shape, have seen very limited use. http://i222.photobucket.com/albums/dd231/saadet4/DSM/injectors.jpgWalbro 255 HP fuel pump - $60 Can be sold by itself or part of the fuel pump assembly. http://i222.photobucket.com/albums/dd231/saadet4/DSM/walbro.jpgNGK spark plugs and wires - $35 Set of NGK spark plug wires and BPR7ES spark plugs that have seen very limited use. Also includes a set of Moroso spark plug wire seperators. http://i222.photobucket.com/albums/dd231/saadet4/DSM/spark.jpgShaved valve cover - $50 Valve cover that has been shaved of all letters and ribs. The cover was painted in high temp flat black paint that could use a few small touch-ups in places, but other wise in excellent shape. Also includes a stainless valve cover bolt set and valve cover gaskets. Note that the spark plug cover bolt hole closest to the cam gears is cracked. http://i222.photobucket.com/albums/dd231/saadet4/DSM/valvecover.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/engine1.jpgRRE/Carbontrix carbon fiber spark plug cover - $50 In great shape. Has only been drilled for 4 of the 5 valve cover bolt holes. http://i222.photobucket.com/albums/dd231/saadet4/DSM/spcover.jpgNon-cruise throttle cable - $20 Excellent shape for a cruise delete. http://i222.photobucket.com/albums/dd231/saadet4/DSM/throttlecable.jpg
Last edited by Paul Saadetian; February 01, 2009 08:57 pm UTC.
|
|
|
Re: Big 2g Performance/Stock Part Out
[Re: Paul Saadetian]
#293610
March 19, 2009 02:27 am UTC
March 19, 2009 02:27 am UTC
|
Joined: Aug 1998
Posts: 589
Etobicoke
Paul Saadetian
OP
Serious Member
|
OP
Serious Member
Joined: Aug 1998
Posts: 589
Etobicoke
|
Update and more parts to add: 97-99 Eclipse OEM side skirts - $200 Skirts are in excellent shape. They have been mostly sanded down and are ready for paint. Door caps are not included. http://i222.photobucket.com/albums/dd231/saadet4/DSM/skirts.jpg97-99 Eclipse OEM high rise spoiler - $200 Spoiler is in excellent condition, factory black paint. Gaskets on mounting surfaces are intact, includes mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/spoiler1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/spoiler2.jpgYonaka front mount intercooler - $250 Intercooler is in nice shape, a few bent fins that can be straightened out. Comes with mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/IC1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/IC2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/IC3.jpgApexi air filter - $90 Beautiful small little filter in mint shape. Comes with angled three inch high temp silicone coupler and t-bolt clamps to run it straight off a turbo inlet. See engine bay pic above to see how I was running it. Also comes with custom made adapter and stainless mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/intake1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/intake2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/intake3.jpgHayame radiator cap - $5 This is a stick-on addition to the stock radiator cap, which is included. Good shape. http://i222.photobucket.com/albums/dd231/saadet4/DSM/rad_cap.jpgDSMLink V2 - $700 Socketed EPROM ECU with DSMLink V2. Includes cable, Keyspan USB to serial adapter, and original EPROM chip. http://i222.photobucket.com/albums/dd231/saadet4/DSM/dsmlink.jpgGM 3 bar MAP sensor - $60 Includes plug with wires ready to solder and a stainless bracket I made for mounting it to the firewall. http://i222.photobucket.com/albums/dd231/saadet4/DSM/mapsensor.jpgShortened stock shifter and bushing kit - $50 Stock shifter that has been cut short and rewelded. Not a true short shifter, but it does reduce the throws and puts the shift knob a lot lower which is nice. Indludes a Symborski shifter base bushing kit. http://i222.photobucket.com/albums/dd231/saadet4/DSM/shifter.jpgDual gauge A pillar and Autometer gauges - $90 Includes a full dual-gauge A pillar holder that has been JB Welded to stock A pillar trim. Also includes two mechanical Autometer Ultra-Lite gauges, -30 to 30 psi boost with nylon hose and 100 to 250 water temp with sensor. http://i222.photobucket.com/albums/dd231/saadet4/DSM/gauges1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/gauges2.jpgStainless clutch line - $20 Stainless clutch line replacement, includes a stainless bracket and hardware for securing it to the tranny. http://i222.photobucket.com/albums/dd231/saadet4/DSM/clutchline.jpgMetal hub-centric rings - $20 A set of metal hub centric rims that won't fall apart over time like plastic ones seem to do. http://i222.photobucket.com/albums/dd231/saadet4/DSM/rings.jpgBlack floor mats - $35 Set of black front and rear floor mats in excellent condition. Perfect fit, the back is nibbed like the stock mats so they don't slide around. http://i222.photobucket.com/albums/dd231/saadet4/DSM/mats.jpgHead unit install kit - $5 Install kit for a single DIN head unit with pocket underneath for storage. http://i222.photobucket.com/albums/dd231/saadet4/DSM/install.jpg
|
|
|
Re: Big 2g Performance/Stock Part Out
[Re: Paul Saadetian]
#298361
May 06, 2009 03:18 am UTC
May 06, 2009 03:18 am UTC
|
Joined: Aug 1998
Posts: 589
Etobicoke
Paul Saadetian
OP
Serious Member
|
OP
Serious Member
Joined: Aug 1998
Posts: 589
Etobicoke
|
Another update and some more parts to add: 97-99 Eclipse OEM side skirts - $200 Skirts are in excellent shape. They have been mostly sanded down and are ready for paint. Door caps are not included. http://i222.photobucket.com/albums/dd231/saadet4/DSM/skirts.jpg97-99 Eclipse OEM high rise spoiler - $200 Spoiler is in excellent condition, factory black paint. Gaskets on mounting surfaces are intact, includes mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/spoiler1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/spoiler2.jpgYonaka front mount intercooler - $250 Intercooler is in nice shape, a few bent fins that can be straightened out. Comes with mounting hardware. http://i222.photobucket.com/albums/dd231/saadet4/DSM/IC1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/IC2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/IC3.jpgShortened stock shifter and bushing kit - $50 Stock shifter that has been cut short and rewelded. Not a true short shifter, but it does reduce the throws and puts the shift knob a lot lower which is nice. Indludes a Symborski shifter base bushing kit. http://i222.photobucket.com/albums/dd231/saadet4/DSM/shifter.jpgDual gauge A pillar and Autometer gauges - $90 Includes a full dual-gauge A pillar holder that has been JB Welded to stock A pillar trim. Also includes two mechanical Autometer Ultra-Lite gauges, -30 to 30 psi boost with nylon hose and 100 to 250 water temp with sensor. http://i222.photobucket.com/albums/dd231/saadet4/DSM/gauges1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/gauges2.jpgMetal hub-centric rings - $20 A set of metal hub centric rims that won't fall apart over time like plastic ones seem to do. http://i222.photobucket.com/albums/dd231/saadet4/DSM/rings.jpgBlack floor mats - $35 Set of black front and rear floor mats in excellent condition. Perfect fit, the back is nibbed like the stock mats so they don't slide around. http://i222.photobucket.com/albums/dd231/saadet4/DSM/mats.jpgHead unit install kit - $5 Install kit for a single DIN head unit with pocket underneath for storage. http://i222.photobucket.com/albums/dd231/saadet4/DSM/install.jpgZeitronix ZT-2 wideband - $125 Does not include Bosch wideband sensor, otherwise complete kit. Can be logged with DSMLink. http://i222.photobucket.com/albums/dd231/saadet4/DSM/wideband.jpgBare 6 bolt block - $40 Stock bore, could use a good hot tanking. http://i222.photobucket.com/albums/dd231/saadet4/DSM/block1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/block2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/block3.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/block4.jpgTokico spings and dampers - $300 Full kit in good shape. Comes with upper isolators and jounce bumpers. Fairly aggressive drop, somewhere in the neigbourhood of 1.8" if I'm not mistaken. See last pic to get an idea of how low the car was with this suspension. http://i222.photobucket.com/albums/dd231/saadet4/DSM/tokico.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/drop.jpgCobra big brake kit - $700 Excellent full brake kit. Comes with Cobra calipers that have been painted in high temp gloss black. Rotors are 13" in diameter, they have been cad plated, there is some surface rust in the areas where the pads swept away the plating, a few hard stops should clean them off. Also includes brackets, spacers, hardware, and front and rear Earls stainless brake lines. You need 17" rims for these brakes. http://i222.photobucket.com/albums/dd231/saadet4/DSM/brakes1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/brakes2.jpgM3 style mirrors - $40 These mirrors are plastic, they are not painted. Lenses have a bluish tint to them. No LED or blinky lights of any kind. http://i222.photobucket.com/albums/dd231/saadet4/DSM/mirrors1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/mirrors2.jpg2g Chiltons manual - $5 http://i222.photobucket.com/albums/dd231/saadet4/DSM/2gmanual.jpg1g Haynes manual - Medium double double http://i222.photobucket.com/albums/dd231/saadet4/DSM/1gmanual.jpg
|
|
|
Re: Big 2g Performance/Stock Part Out
[Re: Paul Saadetian]
#307287
July 11, 2009 03:28 am UTC
July 11, 2009 03:28 am UTC
|
Joined: Aug 1998
Posts: 589
Etobicoke
Paul Saadetian
OP
Serious Member
|
OP
Serious Member
Joined: Aug 1998
Posts: 589
Etobicoke
|
A few more parts to add and some price drops: 97-99 Eclipse OEM side skirts - $150 Skirts are in excellent shape. They have been mostly sanded down and are ready for paint. Door caps are not included. http://i222.photobucket.com/albums/dd231/saadet4/DSM/skirts.jpg95-96 Talon OEM side skirts - $50 Full six piece Talon skirts in factory black. They still look ok from the side, but there are some chips on the undersides. http://i222.photobucket.com/albums/dd231/saadet4/DSM/skirts2.jpgDual gauge A pillar - $30 Full dual-gauge A pillar holder that has been JB Welded to stock A pillar trim. http://i222.photobucket.com/albums/dd231/saadet4/DSM/gauges1.jpgMetal hub-centric rings - $20 A set of metal hub centric rings that won't fall apart over time like plastic ones seem to do. http://i222.photobucket.com/albums/dd231/saadet4/DSM/rings.jpgBlack floor mats - $35 Set of black front and rear floor mats in excellent condition. Perfect fit, the back is nibbed like the stock mats so they don't slide around. http://i222.photobucket.com/albums/dd231/saadet4/DSM/mats.jpgBare 6 bolt block - $40 Stock bore, could use a good hot tanking. http://i222.photobucket.com/albums/dd231/saadet4/DSM/block1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/block2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/block3.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/block4.jpgCobra big brake kit - $650 Excellent full brake kit. Comes with Cobra calipers that have been painted in high temp gloss black. Rotors are 13" in diameter, they have been cad plated, there is some surface rust in the areas where the pads swept away the plating, a few hard stops should clean them off. Also includes brackets, spacers, hardware, and front and rear Earls stainless brake lines. You need 17" rims for these brakes. http://i222.photobucket.com/albums/dd231/saadet4/DSM/brakes1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/brakes2.jpgM3 style mirrors - $40 These mirrors are plastic, they are not painted. Lenses have a bluish tint to them. No LED or blinky lights of any kind. http://i222.photobucket.com/albums/dd231/saadet4/DSM/mirrors1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/mirrors2.jpg2g Chiltons manual - $5 http://i222.photobucket.com/albums/dd231/saadet4/DSM/2gmanual.jpg1g Haynes manual - Medium double double http://i222.photobucket.com/albums/dd231/saadet4/DSM/1gmanual.jpg2gb Eclipse splitter - $75 This is one of the splitters that I designed and made back in the day. ABS plastic, very durable, wont break or crack. CNC water jet cut, not some hack job. Direct bolt-on to the 2gb Eclipse bumper. The top surface has some rust stains on it from a bracket that used to hold my license plate, and there are a couple of light gouges from the bracket. A quick sanding and respray would have it looking like new. http://i222.photobucket.com/albums/dd231/saadet4/DSM/splitter1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/splitter2.jpg2g grey interior - Offer Every plastic piece from a 2g interior available. Also have a headliner and dash (not pictured). No carpet or seats available. http://i222.photobucket.com/albums/dd231/saadet4/DSM/interior1.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/interior2.jpghttp://i222.photobucket.com/albums/dd231/saadet4/DSM/interior3.jpg
|
|
|
|
|
