The car is a green 95 awd with autotrans 240K. Alot of parts already removed. engine had good compression last time I checked, the hatch looks to be free of rust.

PM with requests - I don't want this sitting around much longer and will be going to the wreckers soon.

colour?

It is green.. Says so right in the first sentence.

oopsies, sorry Im a bit slow haha. I usually am slow after getting home from work

Do you have a front left axle? Do you know if its the same on a 5spd?

Do you have the power steering pump? 4G63?

No, and I believe auto's differ from the manual trans, sorry

Yes - Pm sent

knock sensor available?

is the turbo still good?

if so how much?

I was thinking about keeping to knock sensor, the turbo has no in/out shaft play, but a little side to side(which I know is normal to a certian extent) I don't know if it would be within an "acceptable spec". It did boost the car without issues.

driver's side motor mount.. the one that bolts to the block with the 2 spike like bolts

Yes, I have it - pm with an offer.

edited.

Last call - this will be going soon

Do you still have the taillights?

I just need the brake light harnesses.

The wiring that is bolt/screwed into the housings? I'm pretty sure I have these- I'll try and check Sunday.

do you have a rear passenger side hub and half-shaft. Must have a good bearing in it

I'm looking for a Daytime Running Lights Module found in front of the drivers side tire, just behind the splash guard. It is a metal box about 2 inches square, mounted to the frame with a 10mm bolt, and an electrical connector. If you have this part, and it is in good working order please let me know I can make an offer, thanks!

ps This part controls the highbeams and daytime running lights (half voltage to highbeams), and this part is only found on canadian models.

Last Chance!!! I hope to have this out of my driveway by noon today.

Jay sorry it didn't get back to you - yes I have tail lights and the wiring to them.

Rick I believe I have this box(module). If it doesn't take to long i'll see if I can remove it.

If anyone else needs something the time for requests is now.

still looking for the back seat (bench)

i have that

Well it actually didn't make it out today. So first thing next week it will be gone!

pm sent..