Gauging interest 1g fwd turbo partout
#301720
May 29, 2009 09:05 pm UTC
May 29, 2009 09:05 pm UTC
|
Joined: Mar 2004
Posts: 1,027 Port Hope
brendan warwick
OP
Serious Member
|
OP
Serious Member
Joined: Mar 2004
Posts: 1,027
Port Hope
|
So I blew my tranny and have a awd I can fix up, so I am thinking about parting this out, 1991 fwd turbo lots of pics can be found here http://ca.dsm.org/forums/ubbthreads.php?ubb=showflat&Number=291447#Post291447 The car has everything execpt tranny, and cvs are spoken for if I part it out. It has a turbosmart b/c, act 2600 pp and 6 puck sprung, urthine engine mounts, small frontmount intercooler + homemade piping maf-t and 3 inch gm maf spare 3inch gm maf magnus heat barrier ss clutch line 2.5 inch axle back with reactive muffler fwd black mitsubishi valve cover, semi polished letters, satin black finish, looks mint autometer gauges volts and water temp no lights rims pics can be found here http://ca.dsm.org/forums/ubbthreads.php?ubb=showflat&Number=299427#Post299427and all other stock partswill post pic,s of other parts when I get a chance
Last edited by brendan warwick; May 29, 2009 09:10 pm UTC.
1998 tsi awd, some mods 1997 spyder gst, some mods 1996 honda civic B20 2003 Honda Accord
|
|
|
Re: Gauging interest 1g fwd turbo partout
[Re: brendan warwick]
#301729
May 29, 2009 09:46 pm UTC
May 29, 2009 09:46 pm UTC
|
Joined: Oct 2005
Posts: 10,749 Belleville, Ontario
Ryan Laliberte
No-Lift-To-Shift.... Stock. :)
|
No-Lift-To-Shift.... Stock. :)
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2005
Posts: 10,749
Belleville, Ontario
|
GOOD GOD I NEED PARTS!!!
I/We need the two brackets on the subframe that hold the control arm bushing to the subframe.
AWDAuto 1996 TSi AWD Automagic12.24 @ 113 - Small 16G FP Green HTA - 11.42/123 Team Pump Gas and Meth RTMRacing - Your Canadian source for DSM Parts "Every moment you live is pregnant with the next moment of your life" --Jim CarreyLast Login: September 28, 2021
|
|
|
Re: Gauging interest 1g fwd turbo partout
[Re: Ryan Laliberte]
#301755
May 30, 2009 12:21 am UTC
May 30, 2009 12:21 am UTC
|
Joined: Aug 2007
Posts: 4,796 Oshawa, Ontario, Canada
Brandon Clement
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Aug 2007
Posts: 4,796
Oshawa, Ontario, Canada
|
If you part it out, I will end up grabbing the valve cover from you for my 2G
No more Jetta! Tattoo Artist at Lost Anchor
|
|
|
Re: Gauging interest 1g fwd turbo partout
[Re: Anthony Hiscock]
#301862
May 30, 2009 08:06 pm UTC
May 30, 2009 08:06 pm UTC
|
Joined: Mar 2004
Posts: 1,027 Port Hope
brendan warwick
OP
Serious Member
|
OP
Serious Member
Joined: Mar 2004
Posts: 1,027
Port Hope
|
Pm's answered, I would be willing to sell the 1g(91)/2g(98) coversion, but never finished it. With a 1gb hood I think it would be done(might have to grind and glass a bit) anyways whats spoken for is
cv shafts valve cover tranny bolts tube mainfold
I also have a set of ebay 2gb eclipse headlights that I won't be using, among other things, I will look through my parts. Everything has to go as I need cash to finish the awd and safty and e-test it.
Last edited by brendan warwick; May 30, 2009 08:07 pm UTC.
1998 tsi awd, some mods 1997 spyder gst, some mods 1996 honda civic B20 2003 Honda Accord
|
|
|
Re: Gauging interest 1g fwd turbo partout
[Re: Anthony Hiscock]
#302083
June 01, 2009 06:15 am UTC
June 01, 2009 06:15 am UTC
|
Joined: Mar 2004
Posts: 1,027 Port Hope
brendan warwick
OP
Serious Member
|
OP
Serious Member
Joined: Mar 2004
Posts: 1,027
Port Hope
|
Not sure Happen to have a good 14B Brendan? I have 2 or 3, I'll have to double check the condition
Last edited by brendan warwick; June 01, 2009 06:15 am UTC.
1998 tsi awd, some mods 1997 spyder gst, some mods 1996 honda civic B20 2003 Honda Accord
|
|
|
Re: Gauging interest 1g fwd turbo partout
[Re: brendan warwick]
#302088
June 01, 2009 11:25 am UTC
June 01, 2009 11:25 am UTC
|
Joined: Oct 2005
Posts: 10,749 Belleville, Ontario
Ryan Laliberte
No-Lift-To-Shift.... Stock. :)
|
No-Lift-To-Shift.... Stock. :)
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2005
Posts: 10,749
Belleville, Ontario
|
AWDAuto 1996 TSi AWD Automagic12.24 @ 113 - Small 16G FP Green HTA - 11.42/123 Team Pump Gas and Meth RTMRacing - Your Canadian source for DSM Parts "Every moment you live is pregnant with the next moment of your life" --Jim CarreyLast Login: September 28, 2021
|
|
|
Re: Gauging interest 1g fwd turbo partout
[Re: Ryan Laliberte]
#302236
June 02, 2009 06:03 am UTC
June 02, 2009 06:03 am UTC
|
Joined: Mar 2004
Posts: 1,027 Port Hope
brendan warwick
OP
Serious Member
|
OP
Serious Member
Joined: Mar 2004
Posts: 1,027
Port Hope
|
maf-t an gm 3inch maf - sold -Parts that are gone- maf-t and 3 inch gm maf cv shafts valve cover tranny bolts tube mainfold GOOD GOD I NEED PARTS!!!
I/We need the two brackets on the subframe that hold the control arm bushing to the subframe. Do you still need these? and will I be able to tow rope the car out of there? If not you might have to wait a week or so depending on how everything goes with the awd
1998 tsi awd, some mods 1997 spyder gst, some mods 1996 honda civic B20 2003 Honda Accord
|
|
|
Re: Gauging interest 1g fwd turbo partout
[Re: Anthony Hiscock]
#302409
June 03, 2009 03:48 am UTC
June 03, 2009 03:48 am UTC
|
Joined: Aug 2007
Posts: 4,796 Oshawa, Ontario, Canada
Brandon Clement
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Aug 2007
Posts: 4,796
Oshawa, Ontario, Canada
|
You can take apart any housing, you just need to bake it for a little bit in the oven to soften up the silicone.
No more Jetta! Tattoo Artist at Lost Anchor
|
|
|
Re: Gauging interest 1g fwd turbo partout
[Re: brendan warwick]
#302478
June 03, 2009 09:42 pm UTC
June 03, 2009 09:42 pm UTC
|
Joined: Oct 2005
Posts: 10,749 Belleville, Ontario
Ryan Laliberte
No-Lift-To-Shift.... Stock. :)
|
No-Lift-To-Shift.... Stock. :)
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2005
Posts: 10,749
Belleville, Ontario
|
Brendan, you will still be able to roll the car. If you look underneath the car on the subframe: I need those 2 brackets. They are held on by 2 14mm nuts and 1 17mm bolt. The bushing bolt is also 17mm. The car will still roll and you can even do it with the wheels on the ground. Will pay for the time, the part and the shipping to get it here. This is rather urgent.
Last edited by Ryan Laliberte; June 03, 2009 09:43 pm UTC.
AWDAuto 1996 TSi AWD Automagic12.24 @ 113 - Small 16G FP Green HTA - 11.42/123 Team Pump Gas and Meth RTMRacing - Your Canadian source for DSM Parts "Every moment you live is pregnant with the next moment of your life" --Jim CarreyLast Login: September 28, 2021
|
|
|
Re: Gauging interest 1g fwd turbo partout
[Re: brendan warwick]
#302489
June 03, 2009 10:59 pm UTC
June 03, 2009 10:59 pm UTC
|
Joined: Mar 2004
Posts: 1,027 Port Hope
brendan warwick
OP
Serious Member
|
OP
Serious Member
Joined: Mar 2004
Posts: 1,027
Port Hope
|
-Sold parts- cv shafts tranny bolts tube mainfold turbo smart b/c
-On hold- valve cover shifter linkages and mounting plate and side skirts
Everything else is up for grab if it doesn't end up in the AWD, pm me with what you need, I already have the cvs out and tranny should be out a bit later, also the motor in it is good just not sure what kind of pistons(2g/forged/ or n/t) I have ran this motor for 2 years with out a problem, I did a compression test that turned out good will do another and get pics and the lifters are ticking.
1998 tsi awd, some mods 1997 spyder gst, some mods 1996 honda civic B20 2003 Honda Accord
|
|
|
|
|