For sale is my talon it's a 6/4 setup consisting of very mild modifications.The car has power windows,power steering,moon-roof,power locks and black leather interior.The engine was swapped by the previous owner with a 6 bolt block.List of upgrades are as follows :

Walbro 255lph intank pump
Front mount intercooler
3" exhaust with HKS dragger muffler
3" magnaflow hi-flo catalytic converter
HKS mega filter
Ball and spring style manual boost controller @ 10 psi
Socketed eprom ecu with peckerhead racing chip
ported 2g exhaust manifold <tapped for egt probe>
14b turbo
RC 550 cc injectors

A little bit more about the car truth be told it will need tires and brakes as it has been sitting for some time. The vehicle is in perfect running order and is started regularly.On the down side as with most 1g's the door locks are sticky which can be a pain at times.This particular 1G has no rust what so ever fenders are z3 fiberglass replacements for the typical rusted front fenders.I'am confident it will pass emissions testing with flying colors as a current student i do not have the time or resources to sell the car certified or emissions tested so it will be sold as is. I believe the price is fair for what you are getting both in a clean body and modifications. Therefore my asking price will be $2500 obo as is

I would like to sell this as soon as possible but am in no way desperate. Please feel free to either call or txt me at 519-722-3976 or e-mail me at Elias_k2000@hotmail.com

Rev Limt 8000
Idle: 850
injector compensation: 550cc
Deadtime +180
Launch RPM: 5000
Fuel cut removed.
IPW cap removed.
Octane Reset.
2X Hz Logging
Boost gauge = knocksum

I leaned the A/F ratio out a bit to 10:1. this is till plenty rich, but better than stock.

I also smnoothed out the top timing map a bit. (Stock, it has a peak @ 6000 rpm that is way too high for running any decent amount of boost. It now starts off the same as stock, and climbs to a peak of 20* at 7000 rpm.

This is the information supplied to me by Steve for what has been programmed on the chip.

eprom ecu with chip for sale-$150obo
3" exhaust magna flow cat and hks dragger muffler-$200obo
2g Injen intake with couplers- $75obo
rc 550's-$100 <plus your old 450's>
2g exhaust manifold-$60obo
2g 17" swirlies-$200obo
17" moregi mr7's in black-$350obo
255 lph intake walbro-$75obo

PM if interested...

also willing to sell rolling shell or running stock

I know Jay M. is looking for an eprom for sure

Sure am, My head seems to have fallen through too so I am probably just going to use my talon head for now.

PM sent.

eprom ecu-pending
walbro-pending

FMIC + pipes - sold

550's sold....

updated list..

3" exhaust magna flow cat and hks dragger muffler-$200obo
2g Injen intake with couplers- $75obo
rc 550's-$100
2g exhaust manifold-$60obo
2g 17" swirlies-$175obo
17" moregi mr7's in black-$300obo
MBC $20

Engine + Tranny + T-case make an offer ....

Rolling shell make an offer....

Id like to get parts moving asap as i need space please pm or txt me ..

$200 for the Tranny/T-case Combo

Sorry Matt that was just sold last night.....

any pics of the shell?

Not at the moment unless you can find my old thread when i previously had the vehicle for sale..its red with black leather rust free....could use some fresh paint....

updated list..

3" exhaust magna flow cat and hks dragger muffler-$200obo
2g Injen intake with couplers- $75obo
2g exhaust manifold-$60obo
2g 17" swirlies-$175obo
17" moregi mr7's in black-$300obo
MBC $20

Engine $400 obo 6 bolt complete motor 150-155 across the board...

Rolling shell make an offer $650 obo

Id like to get parts moving asap as i need space please pm or txt me ..

I bought the transmission, so whomever buys the motor we can meet there to pull the motor set at once! (Heads up for incase I havent pulled the transmission already, due to cold weather I have been delayed)

I've dropped my tranny about 250 times now, so if you want to go get your tranny I'll go help you take it out.. Doesn't take long at all.. I want to check out the car anyways. Let me know!

Wow 250 times is a lot! Reminds me of Ben Kalinowski
I guess you won't be needing your tranny rebuilt Errol , no worries I had a little lineup anyways , so less work for me now

Obviously exagerating lol.. At least 8 though between my 2 cars

Nice Reza. See you on Saturday buddy.

Sorry Reza, maybe next time... It was a bit cheaper this way

Kyle let me know when you coming down!

Thanks in advance

Kyle if you end up going down you can pull your 550's if you wish

Yup that would be my plan is to get them while I am there:).. I wanna look at the shell as well.. Pm me and well talk about a meet date for dropping that tranny Errol

Pics of the intake please.

its a regular 2g injen intake with a recir. tube

updated list..

2g Injen intake with couplers- $75obo

2g exhaust manifold-$60obo

2g 17" swirlies-$175obo

17" moregi mr7's in black-$300obo

MBC $20

Engine $400 obo 6 bolt complete motor 150-155 across the board...

Rolling shell make an offer $650 obo

Id like to get parts moving asap as i need space please pm or txt me ..

Any pics of the parts specifically the MBC

just a generic ball and spring unit....currently pending payment on it ....

updated list..

2g Injen intake with couplers- $75obo

2g 17" swirlies-$175obo

17" moregi mr7's in black-$300obo

Engine $250 firm 6 bolt complete motor 150-155 across the board...<buyer must pull it come take it away>

Rolling shell make an offer $650 obo

Id like to get parts moving asap as i need space please pm or txt me ..

I will be going to his place on Friday to pull the transmission. If anybody is thinking of buying the motor Friday is your lucky day to have a few extra bodies there!

Junior (Errol)

updated list..

2g Injen intake with couplers- $75obo

2g 17" swirlies-$175obo



Id like to get parts moving asap as i need space please pm or txt me .. Thats the last of my parts lets get them moving !!