As posted i need a right rear spindle for my talon. Really need help on this one as money is tight right now. Tsi AWD

Thanks

REALLY NEED HELP on this one guys. The knuckle in the rear is the same for AWD and FWD from like 92 to 99.

No body make these anymore cant find any online either.

What do you mean by rear spindle? Are you looking for the knuckle or wheel bearing?

The knuckle the everything attaches to.

In that case, no the knuckles aren't the same from 92-99 fwd & awd, their all basically different. Only 95-99 are similar, fwd & awd are different. The awd version might be able to work with the fwd (haven't verified) but the fwd knuckles will not work with an awd car. Then there is also two different versions if your cars ABS or non ABS. Actually there's also a slight difference between the 95-97 vs 98-99 arms as well, as the 98-99 are curved slightly different to allow for more tire clearance.

I have a spare set of 95-97 awd knuckles but wasn't really looking to sell them at the moment as their part way through a refinish. They are the ABS version but the ABS sensors are partially removed/broken. If your cars ABS this could be an issue as they normally rust themselves in place making them almost impossible to remove & swap to another knuckle. Not sure if you can buy just the sensors.

Mine have bushings removed as I was going to put urthane bushings in & are part sanblasted. I'd only be looking to sell them as a pair & they won't be cheap as they will be better then new when finished & have $90+ worth of bushings installed.

Thanks for the info I was misinformed. Seeing as im on a really tight budget what would you want?...(be easy on me now)

If your on a budget, this probably isn't the route for you. Looking at $200 for the pair, that would be sandblasted & painted, with new Energy Suspension bushings installed. Not flexible on that price as I'm not really looking to sell them & still have to finish, re-finishing them (which I don't really have the time to do).

Being there different bushings vs stock an alignment would need to be done as well, if you don't you'll probably kill your tires.

These are awd knuckles with the mount for ABS sensors but no ABS sensors are included (if your car has ABS this might be an issue as you probably won't be able to remove your current sensors without breaking them)

I'll let you know if i have to get them i have to, ill keep looking thanks for your time.

Just to add to this thread, the rear knuckles new are not cheap. The only reasonable option really is to find someone who is parting out their entire car and ask them if you can grab the knuckles off them.

That's why I posted this but have had limited response

If you can spend around $100 you can probably find one here..
http://www.car-part.com