1992 Eagle Talon TSi AWD 5spd BLACK. All prices are OBO. Pictures upon request.

Current kms as of right now: 335,000km
Installed JDM motor: 248,000km with ~60,000km on the motor.
Top-End Rebuild: 292,000km 2008, ~104,000km on the motor at time.
Installed Clutch: 320,000km 2009
Installed Suspension: 325,000km 2009

Engine:
JDM Motor $1500 ... with Clutch assembly $1800
Red powder coated valve cover by Mike D'Angeli
External Oil cooler (90-91 style)
New oil pan
Rear main seal
Timing Belt idler pulley
Timing belt and Balance shaft belt have been replaced multi times
All new gaskets everywhere
K/N Air Filter 1G
ONLY synthetic oil was used in engine
Red Prothane Motor mounts with brackets $200
NOT ON CAR:
2G Intake and MAF + Plug $50
'91 EPROM ECU Ealge Talon TSi FWD 5Spd $200

Drivetrain:
Fidanza 8 lbs 6-Bolt Flywheel
Slow Boy Street Clutch
Slow Boy 3200lbs Pressure Plate ... Whole clutch unit $400
5 Spd. AWD Trans ... only redline oil $200
T-case ... only redline $100
Fully Rebuilt Propeller Shaft by Drive Products $400
LSD Rear Diff. 4-Bolt ... Only Redline and LSD additive $200
Clutch Alignment Tool $15

Suspension/Wheels
KYB AGX Fully Adjustable Shocks (1 year old)
Eibach Sport Line Springs
ALL BRAND NEW HARDWARE FROM MITSUBISHI ... $800
Front tires: 225/45R17 Bridgestone Potenzas RE32 8mm~ $300
Rear Tires: 225/45R17 Dunlop SP Sport 5000 7mm~ $150

CUSTOM EXHAUST
2.5" from O2, 2.5" Cat., right after Cat. 2.5" Resonator Pipe, right after resonator 3" to a 3" inlet and dual 3" outlet Magnaflow Muffler ... $600

Brakes

2 Piston Front Calipers painted black (bought brand new 2 years ago) $250

Random:
Bin full of parts no individual part will be more than $20!

Interior:
Beige Leather

What I've done to the car over the years:
A/C Fully removed
Wheel bearings all around
F/R steering knuckle and Hub
Both front Control Arms and Ball joints
Front outer tie rods
Sway bar links

Thanks
Garrett

PM please.

Is the car running? Is it in one piece? Do you have pictures? Why are you parting out a good condition car?

It is in running condition. It is in one piece. I have pictures but i am unable to put up pictures at this time, i do apologize. The body is rusting out badly (ie. jack stand went through the floor when putting it up in the air, the subframe has developed a crack but is welded back together.

Also, Compression was 170 psi in all cylinders.

Pictures ?

I was there to pick some stuff up a while back, and he started it for me, it started literally 2 cranks over from cold, ran clean and sounded great.

how is the driver door? pw/pl?

the door panel was sold. it has power locks and windows, functioning too.

sorry for the delay on pics guys, hectic weekend. they will be up tonight...

These pics are from when i took it off the road in september:





These last 3 i just took now:




Sorry for the wait!

Thanks
Garrett

Please let me know if you want anymore specific pics...

EPROM ECU- SOLD!!
Suspension- PENDING
Big Brakes- PENDING
Trans- PENDING

Forgot to mention:
Brand new Clutch Master: $160 obo
Brand new Slave Cylinder WITH Extended Rod: $100 obo
(These were both replaced with the CLUTCH JOB)

I might have to come back down again and get some more stuff lol

lol alright buddy. Just give me a shout. Do you still have my number? And what else would you like?

How much for the hood ?

Are you wanting it shipped?

How are the front 2 leather seats? Please email me pics to sachinraja@gmail.com

Suspension SOLD
Big Front Brakes SOLD

Planning on stripping the car down some more SUNDAY...

Also have a brand new Alternator that was on my car for less than a month. $200 firm.

Do you have a working Power Transistor?

the transistor itself or the connector on the wire harness side?

the transistor itself

Come and get it bro.

Need the car gone. Will consider all offers. New Prices will be posted soon.

Thanks Garrett

ALL PRICES OBO...

Current kms as of right now: 335,000km
Installed JDM motor: 248,000km with ~60,000km on the motor.
Top-End Rebuild: 292,000km 2008, ~104,000km on the motor at time.
Installed Clutch: 320,000km 2009
Installed Suspension: 325,000km 2009

Engine:
JDM Motor $1000
Red powder coated valve cover by Mike D'Angeli
External Oil cooler (90-91 style)
New oil pan
Rear main seal
Timing Belt idler pulley
Timing belt and Balance shaft belt have been replaced multi times
All new gaskets everywhere
K/N Air Filter 1G
ONLY synthetic oil was used in engine
Red Prothane Motor mounts with brackets $200
NOT ON CAR:
2G Intake and MAF + Plug $40


Drivetrain:
Fidanza 8 lbs 6-Bolt Flywheel
Slow Boy Street Clutch
Slow Boy 3200lbs Pressure Plate ... Whole clutch unit $350
5 Spd. AWD Trans ... only redline oil $200
T-case ... only redline $100
Fully Rebuilt Propeller Shaft by Drive Products $300
LSD Rear Diff. 4-Bolt ... Only Redline and LSD additive $200
Clutch Alignment Tool

Wheels
Front tires: 225/45R17 Bridgestone Potenzas RE32 8mm~ $300
Rear Tires: 225/45R17 Dunlop SP Sport 5000 7mm~ $150

CUSTOM EXHAUST
2.5" from O2, 2.5" Cat., right after Cat. 2.5" Resonator Pipe, right after resonator 3" to a 3" inlet and dual 3" outlet Magnaflow Muffler ... $500

Brakes - GONE

Random:
Bin full of parts no individual part will be more than $20!

Interior:
Beige Leather

What I've done to the car over the years:
A/C Fully removed
Wheel bearings all around
F/R steering knuckle and Hub
Both front Control Arms and Ball joints SOLD
Front outer tie rods
Sway bar links

Thanks
Garrett

HEADS UP!!!!
Stripping the car of the valued items in the next 2-3 weeks then calling the junkers to pick it up. SO PLEASE CONTACT ME FOR ANYTHING THAT YOU MIGHT WANT ASAP!!!

Still have a brand new alternator...

Bridegstone Potenza RE92 225/45R17 - $250.
Dunlops SOLD.

Do you have rear brakes and/or parking cable?

Sorry they are both gone.