Car porn featuring Brightside.
#375692
May 17, 2012 02:34 am UTC
May 17, 2012 02:34 am UTC
|
Joined: Oct 2005
Posts: 1,864 Fort Erie, Ont
Jay Warwick (Pham)
OP
Serious Member
|
OP
Serious Member
Joined: Oct 2005
Posts: 1,864
Fort Erie, Ont
|
I can't say enough good things about the boys at Brightside. This is how my valve started out: This is how it came back to me: -10AN fittings welded in, powdercoated wrinkle black. Threads cleaned & re-tapped. Big thanks to Mike and Rob for their hard work! Pictures don't do this thing justice at all. Can't wait to get it installed.
Last edited by Jay Pham; May 17, 2012 02:35 am UTC.
03 Mitsubishi Lancer Evolution V/// 93 Mitsubishi Lancer Evolution I 95 & 97 DSM
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#376482
May 29, 2012 04:11 pm UTC
May 29, 2012 04:11 pm UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
I thought that cars today had cast valve covers they just had plastic that covered everything so it looks "nicer" and highlights the only things your typical driver needs to worry about (windshield, oil etc)
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#377790
June 20, 2012 03:24 am UTC
June 20, 2012 03:24 am UTC
|
Joined: Jul 2003
Posts: 3,065 Colborne
Adam Grenon
Insane Member
|
Insane Member
Joined: Jul 2003
Posts: 3,065
Colborne
|
Whats a valve cover like the wrinkle black without welding of -AN fittings usually run a person $$ ?
2012 - Lancer Ralliart Octane Blue 1991 - Talon Tsi AWD FP HTA 71 1992 - Talon Tsi AWD on hold
|
|
|
Re: Car porn featuring Brightside.
[Re: Daren Peacock]
#377833
June 21, 2012 02:18 am UTC
June 21, 2012 02:18 am UTC
|
Joined: Mar 2009
Posts: 3,055 Stanstead, Quebec
Jason Drew
Insane Member
|
Insane Member
Joined: Mar 2009
Posts: 3,055
Stanstead, Quebec
|
Sure, I'll add to this. My pipes coated by Brightside, colour?, top secret Looks like black chrome to me with a top coat. I coated my pipes the same color with glass clear
Last edited by Jason Drew; June 21, 2012 02:19 am UTC.
1997 Eclipse GST - AWD swapped - TPC - GT Spec powered 2023 - 9.63 - 145mph
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#377834
June 21, 2012 02:30 am UTC
June 21, 2012 02:30 am UTC
|
Joined: Mar 2003
Posts: 5,126 Toronto
Rob Cauduro
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Mar 2003
Posts: 5,126
Toronto
|
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#379486
July 16, 2012 02:36 am UTC
July 16, 2012 02:36 am UTC
|
Joined: Mar 2003
Posts: 5,126 Toronto
Rob Cauduro
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Mar 2003
Posts: 5,126
Toronto
|
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#379869
July 19, 2012 11:55 am UTC
July 19, 2012 11:55 am UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
Ruben, what colour is that?
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#379882
July 19, 2012 01:23 pm UTC
July 19, 2012 01:23 pm UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
I thought it couldn't get better than wrinkle black, now I am on the fence on what I want to do.
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#380656
August 01, 2012 08:29 pm UTC
August 01, 2012 08:29 pm UTC
|
Joined: Dec 2000
Posts: 4,398 Ajax, ON
Reza Mirza
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Dec 2000
Posts: 4,398
Ajax, ON
|
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#380659
August 01, 2012 08:39 pm UTC
August 01, 2012 08:39 pm UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#383856
September 14, 2012 06:19 pm UTC
September 14, 2012 06:19 pm UTC
|
Joined: Mar 2003
Posts: 5,126 Toronto
Rob Cauduro
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Mar 2003
Posts: 5,126
Toronto
|
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#383859
September 14, 2012 06:35 pm UTC
September 14, 2012 06:35 pm UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
Cool stuff! What's with the new AN style? Any advantages?
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#383867
September 14, 2012 07:19 pm UTC
September 14, 2012 07:19 pm UTC
|
Joined: Mar 2003
Posts: 5,126 Toronto
Rob Cauduro
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Mar 2003
Posts: 5,126
Toronto
|
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#387893
November 01, 2012 02:50 pm UTC
November 01, 2012 02:50 pm UTC
|
Joined: Mar 2003
Posts: 5,126 Toronto
Rob Cauduro
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Mar 2003
Posts: 5,126
Toronto
|
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#388698
November 14, 2012 04:58 am UTC
November 14, 2012 04:58 am UTC
|
Joined: Mar 2003
Posts: 5,126 Toronto
Rob Cauduro
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Mar 2003
Posts: 5,126
Toronto
|
|
|
|
Re: Car porn featuring Brightside.
[Re: Alex Akachinskiy]
#394877
February 17, 2013 09:00 pm UTC
February 17, 2013 09:00 pm UTC
|
Joined: Mar 2003
Posts: 5,126 Toronto
Rob Cauduro
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Mar 2003
Posts: 5,126
Toronto
|
Yes, we did the were COMPLETELY disassembled. degreased, sandblasted, powder coated and reassembled reconditioning some parts. In Jay's case his seals and boots were in good condition so they were reused. Do you stock rebuild Brembo parts or they were provided by Jay? I found a nice used Brembo calipers for around 500 on eBay. Just want to know if i need anything extra before shipping to you for rebuild. PM/post aprx price for rebuild. Thanks Mike Front calipers for oem seals/boots is gonna set you back aprox 100 per caliper. Front Giro Disc about 60 per caliper. Rear OEM about 70 per caliper. Rear Giro Disc about 40 per caliper. Brembo stuff aint cheap, you gotta pay to play. These prices vary slightly depending on where you buy the parts. ATM, Brightside doesnt stock these parts. The good news is the seals and boots on Brembos are very resilient, and in most cases can last at least 12 years of abuse. The thing I noticed that DOES eat the Brembo boots up is tracking the car and boiling the fluid. The solution would be to use a proper Motul fluid, and possibly titanium shims behind the pads if you are going to punish them on a regular basis. BACK ON TOPIC, Thanks for the kind words. Its nice to hear positive feedback on the work we do. And it is quite labour intensive doing a set of these. But the result is fantastic.
Last edited by Rob Cauduro; February 17, 2013 09:03 pm UTC.
|
|
|
Re: Car porn featuring Brightside.
[Re: Charles Kisielewski]
#394905
February 17, 2013 11:38 pm UTC
February 17, 2013 11:38 pm UTC
|
Joined: Mar 2003
Posts: 5,126 Toronto
Rob Cauduro
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Mar 2003
Posts: 5,126
Toronto
|
Looking good Jay!
Its unfortunate, I see more of these evo(and other)brembo calipers with poor paint/coating than good ones, not sure how brembo dropped the ball on these, maybe the coating doesn't stand up to the brake fluid while bleeding the brakes. I'm hoping its not heat related. It's actually a brembo problem. Afaik, there was a silent recall on certain cars fitted with brembo's for the sketchy paint on them.
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#398239
March 22, 2013 07:40 pm UTC
March 22, 2013 07:40 pm UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
Beautiful stuff!!
What you mean by N/A on the intake manifold?
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#398246
March 22, 2013 08:13 pm UTC
March 22, 2013 08:13 pm UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
Less vacuum ports on the manifold? I didn't know there was a difference
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#398249
March 22, 2013 08:38 pm UTC
March 22, 2013 08:38 pm UTC
|
Joined: Nov 2009
Posts: 2,940 Toronto, Ontario, Canada
Michael Lee
Insane Member
|
Insane Member
Joined: Nov 2009
Posts: 2,940
Toronto, Ontario, Canada
|
I thought it flowed more, but at a lower intake velocity? 2Gs had the smaller runners, but higher intake velocity. Something like that.
Last edited by Michael Lee; March 22, 2013 08:38 pm UTC.
1997 Eclipse GST/X Eat in small amounts. Otherwise be prepared to paint toilet bowls~ Mike Eng
|
|
|
Re: Car porn featuring Brightside.
[Re: Mike Eng]
#398351
March 23, 2013 10:51 pm UTC
March 23, 2013 10:51 pm UTC
|
Joined: Oct 2005
Posts: 10,749 Belleville, Ontario
Ryan Laliberte
No-Lift-To-Shift.... Stock. :)
|
No-Lift-To-Shift.... Stock. :)
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2005
Posts: 10,749
Belleville, Ontario
|
Google'd your bermuda noodle or whatever and found this cool pic
I gotta say Mike, pee'd a little laughing so damned hard.
AWDAuto 1996 TSi AWD Automagic12.24 @ 113 - Small 16G FP Green HTA - 11.42/123 Team Pump Gas and Meth RTMRacing - Your Canadian source for DSM Parts "Every moment you live is pregnant with the next moment of your life" --Jim CarreyLast Login: September 28, 2021
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#399768
April 09, 2013 12:22 am UTC
April 09, 2013 12:22 am UTC
|
Joined: Mar 2006
Posts: 347 Space
Peter Urach
Serious Member
|
Serious Member
Joined: Mar 2006
Posts: 347
Space
|
What type of CNC are you using for your machining work? I'm looking into picking up one for a side project I'm starting. I have tons of experience in 3d-modelling/FEA and G-coding, but I don't know sh!t about CNC machines.
Last edited by Peter Urach; April 09, 2013 12:22 am UTC.
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#399769
April 09, 2013 01:04 am UTC
April 09, 2013 01:04 am UTC
|
Joined: Mar 2003
Posts: 5,126 Toronto
Rob Cauduro
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Mar 2003
Posts: 5,126
Toronto
|
Brightside doesn't have a machine. I am however a machinist/programmer at my day job by trade. We have two Dmg five axis mills, one haas 4 axis mill, one hermley three axis, and one puma Cnc lathe.
I do all my machine work (engines, mods, half assed engineering, whatever) at work off the clock.
Fak, 14 years next month since I got my ticket!
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#399785
April 09, 2013 04:58 am UTC
April 09, 2013 04:58 am UTC
|
Joined: Mar 2003
Posts: 5,126 Toronto
Rob Cauduro
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Mar 2003
Posts: 5,126
Toronto
|
|
|
|
Re: Car porn featuring Brightside.
[Re: Johnny Larmond]
#399795
April 09, 2013 11:46 am UTC
April 09, 2013 11:46 am UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
Those Enkeis look amazing. This!! They are beautiful! Really like that colour!
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: Car porn featuring Brightside.
[Re: Rob Cauduro]
#399803
April 09, 2013 12:06 pm UTC
April 09, 2013 12:06 pm UTC
|
Joined: Mar 2006
Posts: 347 Space
Peter Urach
Serious Member
|
Serious Member
Joined: Mar 2006
Posts: 347
Space
|
Brightside doesn't have a machine. I am however a machinist/programmer at my day job by trade. We have two Dmg five axis mills, one haas 4 axis mill, one hermley three axis, and one puma Cnc lathe.
I do all my machine work (engines, mods, half assed engineering, whatever) at work off the clock.
Fak, 14 years next month since I got my ticket! I've been browsing 4-axis mills but I don't know what specifications to look for other than the max axial motions. I'll be working with mainly aluminum. There's a nice one by Tormach but they seem to be more for prototyping than production.
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#399804
April 09, 2013 12:37 pm UTC
April 09, 2013 12:37 pm UTC
|
Joined: May 2003
Posts: 7,263 Niagara Falls, Ontario
Ziggy Dietrich
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: May 2003
Posts: 7,263
Niagara Falls, Ontario
|
I assume if you are talking about production, you are looking for a full size machine, not a tabletop?
Are you sure you need 4 axis? I have a 4th axis setup and have NEVER used it. It came with the used machine, or I would never have bought it. For the VERY odd time I DID need 4th axis, I found it easier just to farm it out to someone who kept the setup on the table than to do all the setup.
On a slightly related note, if you see any great deals on a used CNC lathe, I am looking...
"bluebird" worlds fastest scooter ridden by me "Whitebird" RIP
|
|
|
Re: Car porn featuring Brightside.
[Re: Rob Cauduro]
#399898
April 10, 2013 10:24 am UTC
April 10, 2013 10:24 am UTC
|
Joined: May 2003
Posts: 7,263 Niagara Falls, Ontario
Ziggy Dietrich
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: May 2003
Posts: 7,263
Niagara Falls, Ontario
|
You cant even buy enough tooling to do a decent job for 10k lol For "home" use, you don't need anywhere near the amount of tooling you are used to, and you would be amazed how cheap this stuff is in the US. How about a CAT40 end mill holder or collet chuck for $29. - $39.? Plus, you don't need to buy your tooling all at once. I am guessing you will end up being disappointed with benchtop machine if you plan to do ANY production. Back in 2006 when I closed the old shop, the auction company didn't advertise well, there was a poor turnout, and I had a beautiful early '80s Maatsura in awesome condition sell on me for $11k. For my mid 80's Mori Seiki MV Junior (WITH 4th axis setup) I paid a little over 20k, but I was in need of a machine in a hurry, couldn't wait to find the right deal at auction...
"bluebird" worlds fastest scooter ridden by me "Whitebird" RIP
|
|
|
Re: Car porn featuring Brightside.
[Re: Ziggy Dietrich]
#399900
April 10, 2013 11:18 am UTC
April 10, 2013 11:18 am UTC
|
Joined: Mar 2006
Posts: 347 Space
Peter Urach
Serious Member
|
Serious Member
Joined: Mar 2006
Posts: 347
Space
|
The part I want to develop is 3x3x4 aluminum and essentially requires a 1/4 endmill, ball nose and port contour cutter so tooling costs aren't even an issue. Like you said, I do alot of shopping/ordering in the US and the most expensive tool (port contour) is ~$190. I have been reading rave reviews about the Tormach 1100. Tormach 1100 1.5HP, R8, available 4th axis. My one issue with older machines is the outdated electronics. I'm concerned about the system crapping out and replacing it. Although I love the fact that most of them come with handwheels. I don't know, perhaps my fears are misguided?
Last edited by Peter Urach; April 10, 2013 11:23 am UTC.
|
|
|
Re: Car porn featuring Brightside.
[Re: Jay Warwick (Pham)]
#399904
April 10, 2013 12:04 pm UTC
April 10, 2013 12:04 pm UTC
|
Joined: May 2003
Posts: 7,263 Niagara Falls, Ontario
Ziggy Dietrich
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: May 2003
Posts: 7,263
Niagara Falls, Ontario
|
Your fears are legit. I am looking to replace my CNC lathe because electronics (axis servo control) crapped out, and replacement costs more than the machine is worth.
If you stick with a fanuc controller, and I would NOT go as old as 6 series, you SHOULD be OK to find spare parts.
That Tormach machine looks like a BIG step up from the tabletops I have seen, but I still question what sort of quick change tooling setup they have. Since they offer an optional tool changer, they must have some sort of a setup for an R8 spindle.
You MIGHT be able to find something similar in the way of a Bridgeport "style" CNC knee mill at an auction reasonably.
"bluebird" worlds fastest scooter ridden by me "Whitebird" RIP
|
|
|
|
|