Check out their page, I plan to order something from them in the future.

http://www.frontlinefabrication.com/

Not personally, but everybody and their cousin on tooners speak very highly about Andrew.

that 30 liter fuel cell looks gorgeous

but i'm after their catch can lool

I sell some of his stuff, and it is nice, but often times he makes to order, and it can take forever to get stuff. Worth the wait, though.....

I MIGHT be able to price match, depending on what kind of discount he is willing to give me....

Ziggy

That catch can is exactly what I was looking for.

The majority of stuff he makes isn't even on the website.

That catch can would look good with my wire tuck...hmmmm.

So, should we try to get a group buy happening??

yes

I will contact him about pricing....

Ive already purchased a different one, but if the "group buy" price is right im down

I would be in for a catch can too, depending on how low it sits. I relocated my battery to sit down farther, but it isn't right on the subframe.

Wow!! I didn't expect expect so many of you guys to like this part! but good! better price..? how could anyone say no right?

I need -10 an fittings and polished. The price I got quoted shipped to UPS store in ogdensburgh is $245 USD. it's a PITA to get it, unless I'm there picking up other sh!t too.

Ziggy, keep us posted



edit: i'm hoping to mount this can in place of my cruise control unit, which has been deleted for quite some time now.

this thing screams SEXXXX!!!!!!! yessss lol

i tried to get this a few months ago.

saw that one too. It looks okay..the FF one looks a little more modern lol

both have the same function but when you're spending 200-300 hundred dollars, you want it right

I'll have to send an email to them to find out exactly where it is meant to bolt into.

PS, welcome back Ziggy.

let's start a list of group buyers so Ziggy knows how many we're looking at.

1. Mike Eng (-10an, polished)
2. Andrew Trapp ?
3. Kyle Guba ?
4. Jason Drew ?
5.

1. Mike Eng (-10an, polished)
2. Andrew Trapp ?
3. Kyle Guba ?
4. Jason Drew ?
5. Pedro Suarez

maybe specify your -an fitting size and finish. you have your choices of raw, powder or polish.

I think it's probably easiest for a group buy to have all those can's matching but this is all new to me. maybe ziggy or paul can chime in with their experiance with this.

Or just have a Frontline Fab group buy, since he makes so many other useful products. Diff covers, valve covers, shields/guards, etc...

All the stuff is made to order, so the discount is going to be based on the fact that we're buying a large quantity of stuff, rather than what we're buying.

Discount is going to depend on pricing he is willing to give me based on what we buy, and a BIG part of the savings will be the combined shipping on the inbound freight. You are correct, though, there is no need to limit it to the catch cans. If there is interest in any other FF product, let's get him a list and see what he can offer us..

I have already asked for pricing on his catch cans, but let's see what interest there is before asking him to quote too many different ways. Not sure if finish and size changes the pricing on his catch cans? If so, it WOULD be useful to know up front. If it doesn't change pricing, we don't need to worry about it until we are ready to order.

Salomon, what kind of 1g stuff do they have? The site is pretty lacking in that section.

Catch cans, diff covers, valve covers, driveshaft loops, clutch/brake reservoir, fuel cell, exhausat manifolds, t-case braces, COP plates, spare tire blockoffs, coolant overflow, waternecks with AN fittings, etc.

I'm in for sure for a -10 AN powdercoated black catchcan dual inlets, vented.

The price does change on the configuration. Vented is 20 more than recirculated, polished is 20 more than raw, powder coated is 10 more than raw.

OK, I hadn't noticed that. He did respond and ask whether I was eferring to 2g catch cans, so maybe he makes one for 1g as well? I asked what else he offers, but he only mentioned machined valve covers (he sent a pic, looks gorgeous, but I am guessing it would be VERY expensive) and a transfer case brace, plus the diff covers (which he now has an EVO version for).

That being said, it probably IS best if we have all the info up front. This is one of those catch 22 situations, where no-one wants to commit without knowing a price, and I can't get an ACCURATE price without knowing who wants what. I would say base your decision on willingness to pay pretty much retail, plus shipping from me to you and taxes, but no inbound freight or brokerage. I can PROBABLY do slightly better, but that will be determined when the order is finalized. Please put your name down only if you are PROBABLY willing to go that high. I realize some people will drop out last minute, which is why I can't give a final price until last minute. I will probably want a deposit at the time of placing the order, and payment in full before I ship to you.

That having been said, let's get a list going with EXACTLY what is wanted:

WHO - WHAT - OPTIONS

1. Mike Eng -2g catch can, -10an, polished VENTED OR RECIRC??? DUAL PORTS??
2. Andrew Trapp -2g catch can, -10an, powdercoated, dual inlets, vented

3. Kyle Guba ?
4. Jason Drew ?
5. Pedro Suarez

I might be intrested in one of these bad boys, I just got to decied what size AN- to get welded to my valve cover ?

I can only consider you "in" if I have ALL the details.

So far, we have ONE (Andrew Trapp)

i'm after the one that i posted a picture of

1. Mike Eng -2g catch can, -10an, polished, vented, dual inlets
2. Andrew Trapp -2g catch can, -10an, powdercoated, dual inlets, vented
3. Kyle Guba ?
4. Jason Drew ?
5. Pedro Suarez

I'm also interested in pricing on a coolant overflow

Kyle, can you please include all the specs from his site (including any options) for what you are interested in, both the catch can and the coolant overflow? I will not be holding anyone to this until I am able to get a better handle on pricing, but still need to know WHAT it is we want when I go to negotiate the price...

I don't know where the coolant ones are, just saw salomon mentioned it.



1. Mike Eng -2g catch can, -10an, polished, vented, dual inlets
2. Andrew Trapp -2g catch can, -10an, powdercoated, dual inlets, vented
3. Kyle Guba -2g catch can, -10an, polished, vented, dual inlets
4. Jason Drew ?
5. Pedro Suarez

I am definitely down for a 1g catch can but there are no details/pictures of it


1. Mike Eng -2g catch can, -10an, polished, vented, dual inlets
2. Andrew Trapp -2g catch can, -10an, powdercoated, dual inlets, vented
3. Kyle Guba -2g catch can, -10an, polished, vented, dual inlets
4. Jason Drew ?
5. Pedro Suarez
6. Bryan Lawrence -1g catch can, -10an, powdercoated, recirc -12an

I have asked him about catch cans for the 1g, and also about coolant overflow for the 2g, am still awaiting a response.

I dont want anything but -6 AN or an NPT hole in its place so I can put an adaptor in there. See if they can provide one or the other, Im in if they can, out if they cant.

1. Mike Eng -2g catch can, -10an, polished, vented, dual inlets
2. Andrew Trapp -2g catch can, -10an, powdercoated, dual inlets, vented
3. Kyle Guba -2g catch can, -10an, polished, vented, dual inlets
4. Jason Drew ?
5. Pedro Suarez
6. Bryan Lawrence -1g catch can, -10an, powdercoated, recirc -12an
7. Rob Cauduro -2g catch can, -6AN inlets and recirc, Raw

1. Mike Eng -2g catch can, -10an, polished, vented, dual inlets
2. Andrew Trapp -2g catch can, -10an, powdercoated, dual inlets, vented
3. Kyle Guba -2g catch can, -10an, polished, vented, dual inlets
4. Jason Drew ?
5. Pedro Suarez- 2g catch can
6. Bryan Lawrence -1g catch can, -10an, powdercoated, recirc -12an
7. Rob Cauduro -2g catch can, -6AN inlets and recirc, Raw
_________________________

Pedro you need to figure out what fittings, finish and vented or recirculated.

Ziggy - do you guys carry those K&N replacement filters for the vented cans? If so, what are they worth?

I believe they are just crank case air filters, less than $10 I remember, might be more if you opt for K&N for those.

that's what i figured, thanks andrew!

They're some version of this:
https://www.rtmracing.com/xcart/product.php?productid=16768&cat=765&page=1