Re: 1G stock OEM parts
[Re: Guillaume Berton]
#386383
October 12, 2012 03:07 am UTC
October 12, 2012 03:07 am UTC
|
Joined: Oct 2010
Posts: 3,607 Brampton, Ontario
Guillaume Berton
OP
Insane Member
|
OP
Insane Member
Joined: Oct 2010
Posts: 3,607
Brampton, Ontario
|
Found a couple more things I can part with: AGX Suspension with Gold line springs. Believe it's for a FWD, not sure. Don't know much about suspension, so if you're local, take a look. Stock intake tube x2 /MAF x 2 (one has wires cut) /1x K&N Filter Painted calipers in Red (not sure on FWD or AWD) you be the judge:
"Looked at it, declared war and went to find my throwing wrenches."
|
|
|
Re: 1G stock OEM parts
[Re: Guillaume Berton]
#389290
November 22, 2012 04:36 pm UTC
November 22, 2012 04:36 pm UTC
|
Joined: May 2003
Posts: 7,263 Niagara Falls, Ontario
Ziggy Dietrich
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: May 2003
Posts: 7,263
Niagara Falls, Ontario
|
Yes, same fitment for mounting, but the 1g lines used a male inverted flare fitting, the 2g used a banjo bolt. His 1g lines won't seal properly on the 2g calipers. He MIGHT be able to make it work using crush washers with his 1g fittings, but I would not want to "McGyver" stuff when it comes to brakes. 2g lines would work, just they might be long, and don't have the provision (iirc) to attach to the hard line piece at the shock.
"bluebird" worlds fastest scooter ridden by me "Whitebird" RIP
|
|
|
|
|