As the title states, looking for a 1g crash bar. Wanted to mount the fogs back in place and well, apparently they attach to the crash bar. Either way I still want a crash bar on there for my safety I have to book, might as well have it.

Let me know what you have and price, the closer the better

Thanks!

you sure about that? my fogs don't mount to the crash bar, there should be three holes in the frame that they mount to.

im pretty sure i have one at home man ill check tomorrow i also have a nice set of fogs too sitting on my toolbox at work

I didnt think those existed anymore? Ive had six 1g's in my posession and only one had a crash bar..

And its gone this spring when I install the IC.

My 2g will go to get saftied with out one.

I cut mine to put my front mount in, front bumper was sagging way to much for me.

Pretty sure they attach to the chassis not the crash bar. But if you don't have one get one it will help you if you were ever to get into a wreck

1gb's mount to the crashed bar. Not sure about 1ga's

Ohh, did not know that. My 1gbs must have been relocated, 1ga is forsure chassis

some day the mountain might get me.. but the law never will.

Thanks for confirming it . I saw it in the Chilton manual. 1ga is to the frame, which makes sense, and 1gbs is to the crash bar, which doesn't make a whole lot of sense.



John, if you find it let me know, specially if it's a 1gb crash bar. I could technically make a bracket for them but I also like to have a crash bar since that will be the only thing at the front (running an upgraded sidemount on this one as well).

I know I can probably pass the safety without it, but I'd rather have it since this will be my daily and I live in Brampton

Thanks for confirming it . I saw it in the Chilton manual. 1ga is to the frame, which makes sense, and 1gbs is to the crash bar, which doesn't make a whole lot of sense.

I think it has to do with the way they changed the headlights and bumper. My 1gb has the 3 hole in the rad support where they would of been mounted on a 1ga.

Yeah, same here. Originally I tried fastening the brackets to those 3 holes but it's way off from the bumper. Then I read the true mounting point on the crash bar

Why not see if you can grab some 1ga fogs?

Because I already have the 1gb fogs with brackets and I still want the crash bar either way Additionally I don't think the 1ga fogs would line up with the 1gb bumper holes

Good call, does the car have a front mount on it? If so what you going to use to cut the bumper?

Don't always need to cut the bumper. My VRSF went in with no cutting at all.

I was just in Belleville today. JUST got home an hour ago...my 1Gb crash bar was there, I could have brought it back for you. Don't know when I'll be back out there, but if you still don't have one by then, I can probably grab mine for you.

No need, running a big sidemount on it, not a fan of the FMIC's (just a personal preference). So I won't have any issues with fitment



Cool, that would be great if I can't grab it from anyone until then. I'll let you know Salomon, appreciate the help

Hm, there must be a huge difference between the 1ga one and 1gb cause I have a vrsf too and I definitely had no choice but to cut the bumper. Is your front mount below the crash bar?

Nope. I had to cut the crash bar about 4". I think Saloman didn't cut his bumper either. Probably the reason why they moved the foglight brackets.

LOL, bumper support = crash bar. Alright so we are on the same page now, I cut my crash bar too, bumper is in one piece as well.

nope salomon has no bumper support either. and we were discussing that 1gbs can get away with no bumper sapport but 1gas need more reinforcment added to hold the bumper in place.

[/quote] LOL, bumper support = crash bar. Alright so we are on the same page now, I cut my crash bar too, bumper is in one piece as well. [/quote]

Yes I cut my crash bar = bumper support. I did not cut bumper = fascia. Sorry I didn't know there was confusion. It was actually Salomon who told me not to bother cutting (I think he saw my eye's tear up) when we were discussing it. As for his Bumper support( crash bar) I have no idea if no idea if he removed it or not.

LOL, bumper support = crash bar. Alright so we are on the same page now, I cut my crash bar too, bumper is in one piece as well. [/quote]

Yes I cut my crash bar = bumper support. I did not cut bumper = fascia. Sorry I didn't know there was confusion. It was actually Salomon who told me not to bother cutting (I think he saw my eye's tear up) when we were discussing it. As for his Bumper support( crash bar) I have no idea if no idea if he removed it or not.[/quote]

My crash bar is removed. On the 1Gb's, the bumpers do not sag without the bar, so they are not necessary (except legally, of course). And yes, with the VRSF FMIC kit, there should be no need to cut/trim the bumper. It fits *perfectly* as is (flush to the edge of the bumper and fills the 'mouth' of it).