11 second 16G Partout
#390467
December 13, 2012 05:49 pm UTC
December 13, 2012 05:49 pm UTC
|
Joined: Dec 2012
Posts: 85 St.Marys On Canada
Jaden Cubberley
OP
Regular Member
|
OP
Regular Member
Joined: Dec 2012
Posts: 85
St.Marys On Canada
|
Hi i am looking to sell my 1990 eagle talon TSI loaded with top of the line performance parts. This car was going to go on the street I drove it with a 10 day pass until it ran out and had an engine failure near the last day. all parts that I have marked (new) were put on and only driven for these 10 days. EVERY part that is listed here is in excellent condition. there is no junk here. most items that are listed are in like new condition. the transmission can be seen here http://www.jackstransmissions.com/collections/value-rebuilds/products/copy-of-stage-2-0-awd-valuePARTS ARE: JACKS STAGE 2.1 TRANSMISSION WITH 4 SPIDER CENTER DIFFERENTIAL $2000 (NEW) SEE ABOVE FOR MORE INFO MASSIVE FMIC INTERCOOLER WITH 304 STAINLESS PIPES AND CUSTOM BUILT J-PIPE, SILICONE COUPLERS AND CLAMPS $600 EVO III 16G TURBO FULLY PORTED (PROFESSIONALLY) IN GOOD SHAPE $250 TURBOSMART ULTRAGATE 38MM WASTEGATE $150 HKS 280 CAMS $350 CUSTOM BUILT 304 STAINLESS TUBULAR MANIFOLD WITH HEAT WRAP $350 304 STAINLESS INTAKE PIPE WITH K&N FILTER, SILICONE CUPLERS AND CLAMPS $100 PTE 1000CC INJECTORS $200 13” COBRA BRAKES WITH VR4 4 PISTON CALIPERS FRONT WITH HUBCENTRIC RINGS $550 (NEW) KYB AGX SHOCKS WITH TEIN LOWERING SPRINGS $300 PTT TWIN DISC CLUTCH WITH SPECIALTY THROW OUT BEARING $750 (NEW) AEM EMS COMPUTER WITH MAP SENSOR $700 AEM WIDEBAND $100 3” EXHAUST WITH DOWNPIPE 409 STAINLESS $300 4 BOLT REAR DIFF WITH AXLS AND CUPS $350 TRANSFER CASE $80 MITSUBISHI SHIFT CABLES BRAND (NEW) $80 MITSUBISHI MASTER CYLINDER (NEW) $60 MITSUBISHI SLAVE CYLINDER (NEW) $30 STAGING BRAKE $200 TURBOSMART DUAL PORT BLOW OFF VALVE $150 AEROMOTIVE FUEL PRESSURE REGULATOR $100 FULLY POLISHED VALVE COVER WITH ADDED VENTS $40 CUSTOM MADE 1/8" ALUMINUM DOOR PANELS WITH WINDOW SWITCHES $80 (NEW) POLY ENGINE MOUNTS $40 WALBRO 255LPH FUEL PUMP $40 AC DELCO BATTERY (NEW) $60 SPARCO HOOD PINS BEST OFFER ORANGE SHELL WITH 8 POINT ROLL CAGE AND LEFT OVER PARTS BEST OFFER PAINT WAS DONE BY BLACKTOP CUSTOMS NOT LONG AGO. I dont want to ship anything but if i cant find enough people in the area i may be willing to ship at the buyers expense. Email jaden_cubberley@hotmail.com for fast response im not on the forum a lot. http://www.youtube.com/watch?v=PwVdhfg0Erchttp://london.kijiji.ca/c-cars-vehi...4G63-TSI-AWD-PART-OUT-W0QQAdIdZ439521935Thanks
|
|
|
Re: 11 second 16G Partout
[Re: Jaden Cubberley]
#390468
December 13, 2012 05:57 pm UTC
December 13, 2012 05:57 pm UTC
|
Joined: Dec 2012
Posts: 85 St.Marys On Canada
Jaden Cubberley
OP
Regular Member
|
OP
Regular Member
Joined: Dec 2012
Posts: 85
St.Marys On Canada
|
I have a tonne more parts that aren't listed: stage 2 exedy clutch, front and rear strut tower bars, oil catch can, poly engine mounts, wheel spacers (2pcs), exhaust flanges for making your own manifold, 2.5" 304 stainless throttle body elbow, 304 stainless downmipe with 02 dump "j-series", digital auto meter oil pressure gauge, eagle connecting rods, ballanced shaft elimination parts, engine blocks,bunch of oem parts.
Let me know what you are looking for
thanks
|
|
|
Re: 11 second 16G Partout
[Re: Jaden Cubberley]
#390469
December 13, 2012 06:02 pm UTC
December 13, 2012 06:02 pm UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
Anyone know what these window switches are all about?
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: 11 second 16G Partout
[Re: Jaden Cubberley]
#390472
December 13, 2012 06:43 pm UTC
December 13, 2012 06:43 pm UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
Can you post some pictures of the interior of the car?
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: 11 second 16G Partout
[Re: Jaden Cubberley]
#390478
December 13, 2012 08:29 pm UTC
December 13, 2012 08:29 pm UTC
|
Joined: Oct 2010
Posts: 9,968 Caledon, Ontario, Canada
Bryan Lawrence
Senior Member, with Far TOO Much Time on Their Hands
|
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2010
Posts: 9,968
Caledon, Ontario, Canada
|
I like to use picassa, that way I can use my Google account that I already have. Plus I have an android phone which makes it heaps easier
"Old Blue" 91 Talon TSi AWD "Super Enthusiast" 91 Talon TSi AWD Checkout DSMFAQ.com!
|
|
|
Re: 11 second 16G Partout
[Re: Jaden Cubberley]
#390482
December 13, 2012 10:12 pm UTC
December 13, 2012 10:12 pm UTC
|
Joined: Oct 2009
Posts: 153 Hamilton Ont
John Cote
Regular Member
|
Regular Member
Joined: Oct 2009
Posts: 153
Hamilton Ont
|
sent him a msg on kijiji few days ago about the wideband and motor mounts he said he has 2 sets of them just waiting for an answer back
1992 Eagle Talon Tsi AWD 2004 Chevy Avalanche SS 1990 Nissan 240sx
|
|
|
Re: 11 second 16G Partout
[Re: Jaden Cubberley]
#390782
December 19, 2012 03:00 pm UTC
December 19, 2012 03:00 pm UTC
|
Joined: Dec 2012
Posts: 85 St.Marys On Canada
Jaden Cubberley
OP
Regular Member
|
OP
Regular Member
Joined: Dec 2012
Posts: 85
St.Marys On Canada
|
someone make an offer on the transmission. looking to get rid of some bigger parts. Purchased from jacks. Retail $2425 plus taxes and shipping. Used for 10 days and selling now. Still has warranty! http://www.jackstransmissions.com/collections/value-rebuilds/products/copy-of-stage-2-0-awd-value*4 spider center differential with torington bearing upgrade *machined double synchro 1st gear upgrade *machined double syncro 2nd gear upgrade *double syncro 3rd, 4th and 5th gear upgrade *all new bearings,seals,springs,roll pins *New all bronze synchronizer blocker ring upgrade *jacks specialty syncro timing process *new 1-2 hub and slider *bead blasted, washed with industrial parts washer and clearcoated already taking a huge loss at $2000 but make an offer!
|
|
|
Re: 11 second 16G Partout
[Re: Jaden Cubberley]
#391877
January 09, 2013 01:38 pm UTC
January 09, 2013 01:38 pm UTC
|
Joined: Dec 2012
Posts: 85 St.Marys On Canada
Jaden Cubberley
OP
Regular Member
|
OP
Regular Member
Joined: Dec 2012
Posts: 85
St.Marys On Canada
|
PARTS ARE: JACKS STAGE 2.1 TRANSMISSION WITH 4 SPIDER CENTER DIFFERENTIAL $1500 (NEW) SEE ABOVE FOR MORE INFO
MASSIVE FMIC INTERCOOLER WITH 304 STAINLESS PIPES AND CUSTOM BUILT J-PIPE, SILICONE COUPLERS AND CLAMPS $400
EVO III 16G TURBO FULLY PORTED (PROFESSIONALLY) THE FLAPPER IS WELDED I BELIEVE/SET UP FOR EXTERNAL WASTEGATE IN GREAT SHAPE $250
TURBOSMART ULTRAGATE 38MM WASTEGATE $150
CUSTOM BUILT 304 STAINLESS TUBULAR MANIFOLD WITH HEAT WRAP $300
304 STAINLESS INTAKE PIPE WITH K&N FILTER, SILICONE CUPLERS AND CLAMPS $100
PTE 1000CC INJECTORS $200
13” COBRA BRAKES WITH VR4 4 PISTON CALIPERS FRONT WITH HUBCENTRIC RINGS $480 (NEW)
KYB AGX SHOCKS WITH TEIN LOWERING SPRINGS $300
PTT TWIN DISC CLUTCH WITH SPECIALTY THROW OUT BEARING $550 (NEW)
AEM EMS COMPUTER WITH 3.5 BAR MAP SENSOR $480
AEM WIDEBAND $100
3” EXHAUST WITH DOWNPIPE 409 STAINLESS $250
4 BOLT REAR DIFF WITH AXLS AND CUPS $350
TRANSFER CASE $80
MITSUBISHI MASTER CYLINDER (NEW) $60
MITSUBISHI SLAVE CYLINDER (NEW) $30
STAGING BRAKE $100 (UNIT ONLY NO LINES) AEROMOTIVE FUEL PRESSURE REGULATOR $80
TURBOSMART DUAL PORT BLOW OFF VALVE $150
AEROMOTIVE FUEL PRESSURE REGULATOR $100
FULLY POLISHED VALVE COVER WITH ADDED VENTS $40
CUSTOM MADE 1/8" ALUMINUM DOOR PANELS WITH WINDOW SWITCHES $80 (NEW)
POLY ENGINE MOUNTS $40
WALBRO 255LPH FUEL PUMP $40
AC DELCO BATTERY (NEW) $60
SPARCO HOOD PINS BEST OFFER STARTER BEST OFFER FRONT AND REAR STRUT TOWER BARS BEST OFFER FORCEPOWER STAGE 2 LONGBLOCK WITH SMASHED VALVES (DAMAGE UNKNOWN) BEST OFFER
ORANGE SHELL WITH 8 POINT ROLL CAGE AND LEFT OVER PARTS BEST OFFER PAINT WAS DONE BY BLACKTOP CUSTOMS NOT LONG AGO.
ALSO SELLING COOLANT OVERFLOW BOTTLES, HAVE 3 LEFT $150 EACH COME WITH LEVEL INDICATOR AND PRO-WERKS CAPS, DIRECT BOLT IN APPLICATION PM FOR MORE DETAILS
Im building a welding and fabrication shop and I will trade any parts plus cash on either end for metal shop equipment if anyone has access to anything like that… looking for: 4’x10GA hydraulic shear, 4’ x 12GA pox/pan brake, miller bobcat 225, 250, 302 portable welder generator, miller syncrowave 250A or higher TIG machine, Bridgeport milling machine, metal lathe or combination mill and lathe, a good metal sander, cnc plasma table ETC
I know that’s a long shot but you never know someone might have something like that laying around lol
|
|
|
Re: 11 second 16G Partout
[Re: Mike Kuttschrutter]
#392031
January 11, 2013 10:42 pm UTC
January 11, 2013 10:42 pm UTC
|
Joined: Oct 2005
Posts: 10,749 Belleville, Ontario
Ryan Laliberte
No-Lift-To-Shift.... Stock. :)
|
No-Lift-To-Shift.... Stock. :)
Senior Member, with Far TOO Much Time on Their Hands
Joined: Oct 2005
Posts: 10,749
Belleville, Ontario
|
!!!!
AWDAuto 1996 TSi AWD Automagic12.24 @ 113 - Small 16G FP Green HTA - 11.42/123 Team Pump Gas and Meth RTMRacing - Your Canadian source for DSM Parts "Every moment you live is pregnant with the next moment of your life" --Jim CarreyLast Login: September 28, 2021
|
|
|
Re: 11 second 16G Partout
[Re: Jaden Cubberley]
#392035
January 12, 2013 01:54 am UTC
January 12, 2013 01:54 am UTC
|
Joined: Dec 2012
Posts: 85 St.Marys On Canada
Jaden Cubberley
OP
Regular Member
|
OP
Regular Member
Joined: Dec 2012
Posts: 85
St.Marys On Canada
|
PICTURES!!!! 1G coolant overflow tanks with pro werks caps made by me $150 http://s643.beta.photobucket.com/us...amp;_suid=135795443146908469793449049467http://s643.beta.photobucket.com/us...mp;_suid=1357954448253042396910246817343http://s643.beta.photobucket.com/us...mp;_suid=1357954463183048933604757444143Evo III 16G turbo setup professionally ported no in and out shaft play normal up and down, turbo blanket, custom 02 housing, custom j-pipe, custom built tubular manifold with heat wrap, turbosmart ultragate 38mm wastegate with dump tube, comes with all the lines but the return line. flapper is welded. only $600! http://s643.beta.photobucket.com/us...amp;_suid=135795472621806802121797862854http://s643.beta.photobucket.com/us...amp;_suid=135795474011408732665793590886http://s643.beta.photobucket.com/us...mp;_suid=1357954754078043583824760829265http://s643.beta.photobucket.com/us...amp;_suid=135795476699808438976705572477http://s643.beta.photobucket.com/us...amp;_suid=135795479480706536141394038109http://s643.beta.photobucket.com/us...mp;_suid=135795536214503011342393043762702 elimination 3" downpipe for mitsu turbos 304 stainless $60obo http://s643.beta.photobucket.com/us...amp;_suid=135795480833302547487180192511VR4 4 piston calipers with 13" powerslot slotted and vented cobra rotors come with: mounting hardware, adapter plates, hubcentric rings and pads $500obo http://s643.beta.photobucket.com/us...amp;_suid=135795487663506809963958548293http://s643.beta.photobucket.com/us...amp;_suid=135795539274005791511976467873fully polished valve cover, vents removed... comes with billet mitsu oil cap $50 http://s643.beta.photobucket.com/us...amp;_suid=135795498125903071167013775884http://s643.beta.photobucket.com/us...amp;_suid=135795555153402112975988391726stainless throttle body elbow with coupler $25 http://s643.beta.photobucket.com/us...mp;_suid=1357955034919043427955526387607304 stainless intake pipe with coupler, clamps and k&n filter $75 http://s643.beta.photobucket.com/us...amp;_suid=135795507299203518286480750716strut tower bars $50 for both http://s643.beta.photobucket.com/us...amp;_suid=135795507299203518286480750716alstar oil catch can $50 http://s643.beta.photobucket.com/us...amp;_suid=135795517361602269248478899279aeromotive fuel pressure regulator $80 http://s643.beta.photobucket.com/us...amp;_suid=135795520637008154678967055708pte 1000cc injectors $200 http://s643.beta.photobucket.com/us...&_suid=13579552300550573171877072885master cylinder used, works good $30 http://s643.beta.photobucket.com/us...mp;_suid=1357955251483034065820668773533CNC staging brake $100 http://s643.beta.photobucket.com/us...amp;_suid=135795527542305790529507817337turbosmart manual boost controller $50 http://s643.beta.photobucket.com/us...amp;_suid=135795529695909130504187032915turbosmart megasonic dual port blow off valve $150 http://s643.beta.photobucket.com/us...amp;_suid=135795532066008229872454602446door panels with switches 6061 aluminum 1/8" $80OBO http://s643.beta.photobucket.com/us...mp;_suid=1357955451583007984646566613335http://s643.beta.photobucket.com/us...amp;_suid=135795536033505260577280966575AEM EMS WITH 3.5 bar map sensor $500 http://s643.beta.photobucket.com/us...mp;_suid=1357955588297020133945642559342http://s643.beta.photobucket.com/us...mp;_suid=1357955553016022405530185151196
|
|
|
Re: 11 second 16G Partout
[Re: Jaden Cubberley]
#393569
February 06, 2013 01:48 pm UTC
February 06, 2013 01:48 pm UTC
|
Joined: Dec 2012
Posts: 66 Canada
Charles McKinnon
Regular Member
|
Regular Member
Joined: Dec 2012
Posts: 66
Canada
|
Interested in suspension let me know
91 Eagle Talon AWD
|
|
|
|
|