Hey guys, just wanted to get the DSM Canada Community aware of a business i started, mainly welding and Fabrication but I am making custom DSM parts Quite often

Check out my facebook page here:

http://www.facebook.com/v8kiler#!/CubberleyWeldingAndFabrication?fref=ts

I dont have a tonne of DSM stuff yet but feel free to check out my page and if you have any sugestions about the page or if your interested in any products let me know.

have acess to a full size shear and brake aswell as a lot of equiptment in my shop at home.

Aluminum TIG & MIG
Stainless TIG & MIG
Chromoly TIG & MIG
Mild steel TIG & MIG

Custom one off parts made in canada.

Catch cans and overflows are popular.

I would be interested in an overflow for a 1g.

I could use a overflow for a 1g as well...

X3 depending on price

let me know what kind of design you are looking for and i will see what i can come up with? i'm guessing people want them the same as from frontline fab?

Frontline Fab doesn't make an overflow or a catch can that is 1g specific..just for the 2g

where are the frontline ones mounted in the engine bay? I could probably make up something that would bolt to the shock towers bolts or would mount with a self tapping screws.

Im thinking one K&N vent per unit and one fitting to connect to valve cover. I can also put a drain valve in the bottom of them.

need to know what size fittings people are wanting and i can get those parts ordered from RTM and build them ASAP

Well for the catch cans most people are running off both vents so you would need two inputs.

As for the coolant overflow, if it mounting bracket was to the stock BOV location that would be perfect, or right behind the rad if you need more clearance.

alright so most people are wanting the coolant overflow right now?

I can probably put something together this weekend for them. not to sure what they will have for a cap yet

Just like this:



Here is the guys website if you want more pictures. You can see the mounting bracket on the third picture.

I could make something exactly like that but they wouldn't be cheap.

Around $150 tax in would be the best i could do. looking at 3 hours labor to build one and i usually charge $60/hr + materials but you never end up making that on these projects.

im sure those caps aren't cheap either

Well I would be in at that price. I don't really care what type of cap just as long as it's screw top.

Also wondering if you would be interested in making me a fuel cell. I would need it to use the original mounting points and would want it to have studs so I can put in the original sending unit.

well lets worry about the overflow before we get to carried away...

would anyone else be in @ $150?

Haha, ok just trying to keep ya busy

I would be in as well

The coolant res from Frontline for the 2g goes where the stock fusebox is. To use it, you need to relocate your stock fusebox. Unfortunately, I don't have any pictures.

The catch can from Frontline, at least for the 2g, mounts above the battery and requires a battery relocation to use.

edit: Not trying to speak for Ziggy, but you might want to get in touch with Ziggy to see if he would be able to supply you with a cap, either by sourcing or fabrication.

I've had a quick look, and only thing I could find decently priced is the Jegs cap and bung. It has the Jegs logo, which I am not sure people would want, and I don't have an account with Jegs. I can get others, but not really cheap.

I DO have a chinese "oil catch tank" that comes with a cap for some reason (no idea why), maybe that could be converted somehow??

I plan to mount the FF catch can where the cruise control would be, but transverse, or perpendicular to the battery. And using two 90* fittings to -10an braided lines to the valve cover. I didn't think the catch can comes with any type of mounting bracket. If it does, that's not good! I'd need to cut and grind them off so I could customize one for my application.

here are some pictures of a piece that i was working on for a bit this weekend. Let me know what you think. not Dead set on this design, might ditch the tubing for a different style.

Theres really only so much that you can do in such limited space, right now its set up to mount to where the stock air box hole is and to a square hole near the rad on the top... the level invicator sits right where the stock overflow is.

No lid yet because everywhere that would sell them is closed. Probably looking at another 2 weeks for the cap because "pro-Werks" is in the states

http://s643.beta.photobucket.com/us...amp;_suid=135681395475702912429386138938


http://s643.beta.photobucket.com/us...amp;_suid=135681397735309117307273082864

I'm not a 100% sure how it works out, but the description is "This guy is 100% bolt-in as long as your battery is relocated."

I am liking it so far, I would definitely be interested in keeping the indicator cause it's always nice to know exactly how much is in there.

Alright well I will keep you guys posted about the caps. I'm sure they will be a while though unfortunately

Good sh!t. You got any pics of it in your 1g?

Update on this... found the pro werks caps, there not cheap but thats alright i will still do the same pricing on them.

I will have the caps friday, ordered 4 of them so if you are wanting one send me a PM and i will reserve one for you.

I have test fit the positioning of them in the car and they are going to fit near the stock location. It will run flat across the front. I will take more pictures when they are fitting right and the caps are on.

Thanks

Do we get to choose a colour for the cap?

The caps will be red...

Perfect

Damn I was doing really good at keeping colour out of my engine bay, can i get black?

LOL seriously? i thought for sure everyone would want a blue or red... I already ordered the red ones

I seem to be one of the select few that want's neither blue or red, I have been slowly taking all the flash out of my bay.

I hear ya Bryan, I was considering it myself but too late..dsm's are meant to be looked at, especially under the hood

Well polished aluminum and wrinkle black is damn nice to look at, don't you think!?

Well brian your in luck, the guy screwed up my order and the caps came in Black.

YAY!!! So when do we get to see pictures of your work and how it mounts?

Possibly this weekend, however i am working on another top secret project that may take a bit of time also.

Gotta be a fuel cell

Hope so!! :-D

Shittayyyy

Here are some pictures for you installed in a 1g with a front mount intercooler and short route piping. I see no reason why they wont fit on a stock intercooler car however.... also i have supplied a 1" spacer with the coolant overflow so if your pipes hit on the bottom all you have to do is put the spacer in the bottom... if they dont hit the spacer will go in the top setting the unit down in farther. The pictures of it are with the spacer on the top.


http://s643.beta.photobucket.com/us...mp;_suid=1357420962638015730591218411588

http://s643.beta.photobucket.com/us...&_suid=13574209824090679978767347643

http://s643.beta.photobucket.com/us...amp;_suid=135742099686808178412868937661

Take my money!! But seriously, when can I get one?