all prices are firm and are picked up only.



-6 bolt 4G63 turbo $500
Balance shaft delete kit with mirage stub shaft
new top line oil pump housing
2nd gen 8.5-1 pistons on 1st gen rods
Clevite Race bearings



-1G 6 bolt head $500
OEM valvetrain
HKS 272 cams ($400 seperate)
Port matched exhaust ports
ported oil path in block through cylinder head to compensate for larger head studs blocking oil path to head



-6 bolt arp head studs $80



-6 bolt stock head studs $40



-7 bolt head (head valves and springs unmolested) $150



-7 bolt block crank and flywheel (not walked or blown) $100



-2 side and front Prothane Polyurethane engine mount bushings, rear is stock $60



-Transmission $1500
Forcepower Stage 3 gear box
Welded Center Diff+ VC eliminated
Chromoly shift forks
DSM gear set



-front 3 cv shafts 150



-Stock T-case $100


-Rebuilt prop shaft $200


-Competition Clutch stage 4 sprung clutch and 2700 pressure plate $180


-Competition Clutch light weight flywheel $180


-Stock 4 bolt rear shafts cups and pumpkin $350 (add another $200 subframe with adjustable toe)


-Eibach Sport line springs on struts $150(front)
-Tein lowering springs $150 (rear)


-Megan Racing Front/rear strut tower bars $100 (both)


-Energy suspension swaybar bushings front and rear $30


-PTE 680cc injectors $120


-Aeromotive fuel pressure regulator with -8an fuel line from fuel Rail to fpr $100


-Walbro 255 intank fuel pump $40


-dual 10" derale slim electric pull/pull fan (set up pushing and brand new) on Stock radiator $250



-blown TD05h 20G 3"compressor cover on 1g manifold (new turbine shaft needs bearings) $150



-stock 14b converted to downfiring $400
turbine housing welded shut and smoothed off and ported
Ported O2 housing



-PTP Subaru Turbo blanket $65



-2.5” intercooler piping long route $500
Custom intercooler W/ CAST endtanks rated 650hp
Turbosmart Race port blow off valve (ver 1)
GM AIT



-6 bolt stock intake manifold $30

-ForcePower Motorsports "Prototypes" Race Sheet Metal Intake Manifold polished ( works amazing) $700
Rebuilt stock 60mm throttle body
p2r phenolic gaskets (both tb sides and im)



-Custom Valve cover shaved polished with -12an Vent $150



-3” intake pipe with -12 fitting w 3" silicone and 3"-2 1/4"adapter $80



-DNP DSM equal length Tubular Exhaust manifold W/ 40mm wastegate flange and adapter (wrapped with DEI Titanium exhaust wrap twice) $600
Tial 38 Wastegate ( double springed blue for 24 psi)


- Full 3” Stainless Steel Exhaust , exhaust wrapped with DEI Titanium exhaust wrap from 02 to the cat $450
3" flex pipe
3” catiyltic converter
3” X 14” Vibrant stainless resonator
3” in 4” out Vibrant SS muffler


-AEM EMS V.1 $700
Master power 4-bar Map



-1g coils $30



-1g igniter $60



-1g MPI $40



-AEM Digital Wideband Sensor + gauge $140


-Stuart Warner electric Oil pressure gauge $30



-Stuart Warner Fuel pressure gauge $30



-Stuart Warner mechanical Boost Gauge -30hg to 40psi $40



-AEM Water/Methanol Injection kit w/1 Gallon tank $300


tsi awd Exterior/Shell $400
190,000km, ,
-stock 16” 92 tsi awd rims (Fusion ZRI tires less than 10,000km 225/50/16) $400



-new magnacore thundervolt wires $80



-2g MAF $80



-stock 1gb head lights + markers$80



-clear and blacked 1gb lights(led bulbs) + markers $200



-1Gb Taillights $150



-Shifter base and solid bushings with cables $120



-complete power doors ding free mint hinges $200 per side



-fenders $80 per side

-hatch with shocks and latch with full stock wing $450



-hood gutted vented and pinned with pins $100



-wiper motor assembly $60



-cowl cover black $60



-front subframe with rack and sway bar $200



-rear subframe with sway bar $200



-front cross bar north south bars $75



-all 4 brake calipers $120



-leather interior (front and rear seats) $250



-black carpet $60



-center console with gauge hole $50



-steering colum with grant hub $400



-front bumper $60



-rear bumper $60



-rear reinforcement bar $40



-all seatbelts $200



-dash ( + boulster and glovebox)$150



-Wiring harness $100

Forcepower Stage 3 gear box eh???

Ghislain

Interested in the clutch but the whole pickup only thing kind of sucks...

What colour is the hood and front bumper?

I'd pickup those HKS 272's off ya but your so far away...

Other than all the force power junk it looks like a lot of great parts. Still not willing to ship anything?

yup pickup only, sorry I have had too much bad luck shipping parts, never again

or come pick up the whole car for $5500

update and edit***

all prices are firm and are picked up only.



-6 bolt 4G63 turbo $300
Balance shaft delete kit with mirage stub shaft
new top line oil pump housing
2nd gen 8.5-1 pistons on 1st gen rods
Clevite Race bearings



-1G 6 bolt head $400
OEM valvetrain
Port matched exhaust ports
ported oil path in block through cylinder head to compensate for larger head studs blocking oil path to head


- HKS 272 cams $400 (pending)


-6 bolt arp head studs $80



-6 bolt stock head studs $40



-7 bolt head (head valves and springs unmolested) $150



-7 bolt block crank and flywheel (not walked or blown) $50



-2 side and front Prothane Polyurethane engine mount bushings, rear is stock $60



-Transmission $1300
Forcepower Stage 3 gear box
Welded Center Diff+ VC eliminated
Chromoly shift forks
DSM gear set



-front 3 cv shafts 150



-Stock T-case $100


-Rebuilt prop shaft $200


-Competition Clutch stage 4 sprung clutch and 2700 pressure plate $180


-Competition Clutch light weight flywheel $180


-Stock 4 bolt rear shafts cups and pumpkin $350 (add another $200 subframe with adjustable toe)


-Eibach Sport line springs on struts $150(front)
-Tein lowering springs $150 (rear)


-Megan Racing Front/rear strut tower bars both SOLD

-Energy suspension swaybar bushings front and rear $30


-PTE 680cc injectors SOLD


-Aeromotive fuel pressure regulator with -8an fuel line from fuel Rail to fpr $100 pending


-Walbro 255 intank fuel pump $40 pending


-dual 10" derale slim electric pull/pull fan (set up pushing and brand new) on Stock radiator $250



-blown TD05h 20G 3"compressor cover on 1g manifold (new turbine shaft needs bearings) $100



-stock 14b converted to downfiring $350
turbine housing welded shut and smoothed off and ported
Ported O2 housing



-PTP Subaru Turbo blanket $65



-2.5” intercooler piping long route $500
Custom intercooler W/ CAST endtanks rated 650hp
Turbosmart Race port blow off valve (ver 1)


-dsm link sd bundle (gm ait, 4bar map, sd cable for 2g maf plug, bung on tb elbow) $130



-6 bolt stock intake manifold $20

-ForcePower Motorsports "Prototypes" Race Sheet Metal Intake Manifold polished ( works amazing) $700
Rebuilt stock 60mm throttle body
p2r phenolic gaskets (both tb sides and im)



-Custom Valve cover shaved polished with -12an Vent $100



-3” intake pipe with -12 fitting w 3" silicone and 3"-2 1/4"adapter $80



-DNP DSM equal length Tubular Exhaust manifold W/ 40mm wastegate flange and adapter (wrapped with DEI Titanium exhaust wrap twice) $600
Tial 38 Wastegate ( double springed blue for 24 psi)


- Full 3” Stainless Steel Exhaust , exhaust wrapped with DEI Titanium exhaust wrap from 02 to the cat $350
3" flex pipe
3” catiyltic converter
3” X 14” Vibrant stainless resonator
3” in 4” out Vibrant SS muffler


-AEM EMS V.1 $650



-1g coils $30



-1g igniter $60



-1g MPI $40



-AEM Digital Wideband Sensor + gauge $140


-Stuart Warner electric Oil pressure gauge $30



-Stuart Warner Fuel pressure gauge $30



-Stuart Warner mechanical Boost Gauge -30hg to 40psi $40



-AEM Water/Methanol Injection kit w/1 Gallon tank $300


tsi awd Exterior/Shell $400
190,000km, ,
-stock 16” 92 tsi awd rims (Fusion ZRI tires less than 10,000km 225/50/16) $350



-new magnacore thundervolt wires $80



-2g MAF $80



-stock 1gb head lights + markers$80



-clear and blacked 1gb lights(led bulbs) + markers $200



-1Gb Taillights $150



-Shifter base and solid bushings with cables $120



-complete power doors ding free mint hinges $200 per side



-fenders $80 per side

-hatch with shocks and latch with full stock wing $450



-hood gutted vented and pinned with pins $100



-wiper motor assembly $60



-cowl cover black $60



-front subframe with rack and sway bar $200



-rear subframe with sway bar $200



-front cross bar north south bars $75



-all 4 brake calipers $120



-leather interior (front and rear seats) $250



-black carpet $60



-center console with gauge hole $50



-steering colum with grant hub $400



-front bumper $60



-rear bumper $60



-all seatbelts $200



-dash ( + boulster and glovebox)$150



-Wiring harness $100

Just a shout out to the community. Assuming Steve is firm on his condition of pickup only, RTM might be willing to do a parts run to Simcoe to pick up a supply of parts and then distribute them from our location (whether shipped from or picked up). However, our conditions would be fairly strict so I figure it would be a longshot that it would ever occur, but I thought it might be worth mentioning. Some of the conditions would include:
- Only a single trip.
- All parts picked up would either be purchased by ourselves for our own purposes or at someone's request. Any such requests would have to be accompanied by either payment up front or a solemn promise to pay.
- We would not be providing this service for free. Compensation would be determined on a case-by-case basis involving either a markup on the price of the parts or payment for the pickup service or some combination of the two.
- We would then coordinate things with Steve.

I suppose any requests for RTM to pickup parts should be made to RTM directly (thru email at ziggy@rtmracing.com) so as to avoid cluttering up this thread.

Steve you think you could get some pictures up?

Thank you Paul could be a good idea. and I will get some pictures as I take parts off the car. so later tonight I hope.

I see pickup being the best way of goin about this, then you are seeing the part in person and knowing exactly what your getting then I cannot be blamed for a part someone did not "really want"

For the exhaust system, are you including the o2 housing, or is the o2 housing part of the turbo?

yes Andrew I am if the buys wants it or needs it. have a few other stock O2 housings to keep with the turbo if needed.

Sounds good, I will see if I can arrange something with Paul.

Oh Paul!

Unless we end up making the trip for our own devious reasons, any trip on behalf of others is going to have to be financed by all the "others" and if that group is small, well, I think you get the idea.

And I have to say, looking down that list, nothing really jumps out at me. But give me some time to mull it over.

Yeah, that is what I figured. If it is an option, it is an option, if not then oh well. We'll keep in touch via email, I have a query into Ziggy regarding a 1g AWD exhaust at the moment.

Price drop $4500 for complete car

Hey Steve would you be able to post up pictures of the exhaust?

I am getting close to trying to finance Paul (RTM) to head up and get it for me, but I may decide to go new.

Ill post one tomorrow after work

pending sale on complete car,

leftover parts for sale

-FPM SMIM $500

-HKS 272's $400

buyer flaked car still for sale
new price complete car $4000

HKS 272 SOLD

Lock it up please, had too many flakes, wasted my time with parts only had a few solid buyers,
So complete car so take it $3500 firm its well worth it